16. Lead Storage Battery
ലീ ്-ആസി ് ബാറ്ററി എനും അറിയ്കപ്പെടുന ഒരു ലീ ് സസ്റ്റാസറജ് ബാറ്ററിയ്കാണ് റീചാർജ് പ്പചയ്യാൻ
കഴിയ്കുന ഏറ്റവും പഴയ്ക രം ബാറ്ററിയ്കും ഏറ്റവും സാധാരണമായ്ക energy ർജ്ജ സംഭരണ
ഉപകരണങ്ങെിപ്പലാനാണ്. ഈ ബാറ്ററികൾ 1859 ൽ ് ഞ്ച് ഭൗ ികശാസ്് ജ്ഞനായ്ക ഗാസ്റ്റൺ ോന്സറ
കരുപിടിച്ചവയ്കാണ്, അവ ഇസൊഴും വിവിധ ആേിസകഷനുകെിൽ ഉപസയ്കാഗികുനു. മിക
ആെുകെും വാഹനങ്ങെിൽ ഉപസയ്കാഗികുന ിന് പ ിവാണ്, അവിപ്പട പവർ ്കാങ്കിംഗിനായ്കി ഉയ്കർന
വവദ്യു ്പവാഹങ്ങൾ നൽകാനുള്ള കഴിവുര്.
ബാറ്ററികൾ വിശവസനീയ്കമാപ്പണങ്കിലും, അവയ്ക്ക് പരിമി മായ്ക ആയ്കുസ്സുര്, കയ്കറ്റുമ ി പ്പചയ്യാൻ
ഭാരമുര്, കൂടാപ്പ ഉപസയ്കാഗ്പദ്മായ്ക ജീവി െിന്പ്പറ അവസാനെിൽ നിർേിഷ്ട നീകംപ്പചയ്യൽ
രീ ികൾ ആവശയമുള്ള വിഷ വസ്ുകെും അടങ്ങിയ്കിരികുനു. ലീ ് ആസി ് ബാറ്ററികൾക്
മി മായ്ക പവർ പ്പ ൻസിറ്റി, മികച്ച ്പ ികരണ സമയ്കം എനിവയ്കുര്. സംസയ്കാജിെിച്ച പവർ
പരിവർെന സാസങ്ക ികവിദ്യപ്പയ്ക ആ്ശയ്കിച്ച്, ബാറ്ററികൾ energy ർജ്ജം സവീകരികുന ിൽ നിന്
energy ർജ്ജം ൽക്ഷണം വി രണം പ്പചയ്യുന ിസലക് സപാകാം. പ്പല ്-ആസി ് ബാറ്ററികൾ
ാപനിലപ്പയ്ക ബാധികുനു, മാ് മല്ല പരമാവധി ആയ്കുർവദ്ർഘയം സനടുന ിന് അ ്
പരിപാലികുകയ്കും സവണം.
17. Design Of lead Storage Battery
ോന്റിന്പ്പറ പ്പല ്-ആസി ് പ്പസല്ലിന്പ്പറ രൂപകൽെനയ്കിൽ, സപാസിറ്റീവ്, പ്പനഗറ്റീവ്
സേറ്റുകൾ രര് സർെിെങ്ങൊയ്ക പ്പല ് സ ായ്കിൽ പ്പകാര് നിർമ്മിച്ച ാണ്, ഒരു ഷീറ്റ്
ുണിപ്പകാര് സവർ ിരിച്ച് ചുരുട്ടി. സകാശങ്ങൾക് ുടകെിൽ കുറെ സശഷി
ഉരായ്കിരുനു. പ്പല ് സ ായ്കിലുകപ്പെ ദ്ുർബലപ്പെടുെുന ിനും സേറ്റുകെിൽ പ്പല ്
വ ഓക്വസ ് സ ഷ്ടികുന ിനും ഉപരി ല വിസ്ീർണ്ണം വർദ്ധിെികുന ിന്
അവപ്പയ്ക കഠിനമാകുന ിനും “രൂപപ്പെടൽ” സവഗ കുറെ ്പ്കിയ്ക ആവശയമാണ്.
ചില വിസ് മായ്ക ആേിസകഷനുകെിൽ ോന്റ് സേറ്റുകൾ ഇസൊഴും ഉപസയ്കാഗികുനു,
അവിപ്പട ഉപരി ല വിസ്ീർണ്ണം വർദ്ധിെികുന ിന് സേറ്റുകൾ യ്കാ്രികമായ്കി
വെർെുനു
18.
19. Discharge Chemistry
In the discharged state, both the positive and negative plates become lead(II) sulfate (PbSO4). The electrolyte loses much
of its dissolved sulfuric acid and becomes primarily water. The discharge process is driven by the conduction of electrons
from the negative plate back into the cell at the positive plate in the external circuit.
Negative plate reaction: Pb(s) + HSO4
–(aq) → PbSO4(s) + H+(aq) + 2e–
Positive plate reaction: PbO2(s) + HSO4
–(aq) + 3H+(aq) + 2e– → PbSO4(s) + 2H2O(l)
Combining these two reactions, one can determine the overall reaction:
Pb(s) + PbO2(s) + 2H+(aq) + 2HSO4
–(aq) → 2PbSO4(s) + 2H2O(l)
20. Charge Chemistry
This type of battery can be recharged. In the charged state, each cell contains negative plates of elemental lead (Pb) and positive plates of lead(IV)
oxide (PbO2) in an electrolyte of approximately 4.2 M sulfuric acid (H2SO4). The charging process is driven by the forcible removal of electrons from
the positive plate and the forcible introduction of them to the negative plate by the charging source.
Negative plate reaction: PbSO4(s) + H+(aq) + 2e– → Pb(s) + HSO4
–(aq)
Positive plate reaction: PbSO4(s) + 2H2O(l) → PbO2(s) + HSO4
–(aq) + 3H+(aq) + 2e–
Combining these two reactions, the overall reaction is the reverse of the discharge reaction:
2PbSO4(s) + 2H2O(l) → Pb(s) + PbO2(s) + 2H+(aq) + 2HSO4
–(aq)
Notice how the charging reaction is the exact opposite of the discharge reaction.
28. Advantages
Rugged, high cycle count with proper maintenance
Only battery that can be ultra-fast charged with little stress
Good load performance; forgiving if abused
Long shelf life; can be stored in a discharged state
Simple storage and transportation; not subject to regulatory control
Good low-temperature performance
Economically priced; NiCd is the lowest in terms of cost per cycle
Available in a wide range of sizes and performance options
29. Disadvantages
Relatively low specific energy compared with newer systems
Memory effect; needs periodic full discharges
Cadmium is a toxic metal. Cannot be disposed of in landfills
High self-discharge; needs recharging after storage