how to config RBS

1. Default IP Address
USB
Login to MINI-LINK TN
control_user /
view_user
Password: Ericsson

2. Configure Basic NE
Right click>configure>Basic NE As per TND NE Name, Location, Contact,
IP address, Subnet Mask and Default GW
Current date and Time

3. Configure OSPF Areas
onfigure>DCN>OSPF Areas
To View the Static R
Right Click>Configure>DCN>

4. Right click MMU2 D>configure>Configure Radio Link
Fill all the parameter as per TND
Configure Radio Link (MMU)

5. Upgrade the Baseline
Right click>Tools>Software Upgrade

6. Select PC>Browse>chose the baseline from list

7. Apply>Next

9. Once 100% done upgrade status the activ

10. Configure Traffic Routing
Right Click>Configure>Traffic Routing

11. Select Interface 1 and Interface 2 as per design slot
and send

12. To Save the TN report
Right click>Tools>Report>Save Repo

13. To Save the Load Configuration
Note: FTP server must be ON/Running
Right click>Configure>Load Configuration
Select Upload to FTP Server and L

14. View The Inventory and Release
Right click>Tools>Inventory

15. Ethernet Switch Configuration
Right Click Ethernet Switch>Configure>General
Select Aging time and Switch m

16. Configure RL-IME
Select RL-IME>Right click>Configure>select the pa

17. Configure WAN
Select WAN Interface>Right click>Configure>General
Connect to Switch Port

18. Configure LAN
Right Click on LAN>Configure>General
Assign the switch port
Admin Status Up

19. Configure VLAN
Right Click on Ethernet Switch>Configure>VLAN

20. Enter the VLAN ID as per Design and Name
Add the port member

21. To View The RSL
Right Click on MMU>Radio link alarm and status

22. To Perform the Loops
Go to Radio Links>Slot>Radio Link Loops