Analynk, LLC antennas are designed for use in “Hazardous-Classified” and Industrial-hardened applications. The antenna will operate in all three bands, GPS L1, GLONASS L1 and Iridium. The omni-directional antennas with 1dBic gain are designed for flexible mounting on a variety of explosion proof housings, or on ¾” rigid metal conduit with a ¾” NPT pipe thread (CTM series has a metric M20 mount). The heavy nickel-plated brass mounting base has an integrated TNC jack coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining maximum radio frequency transmission and reception efficiency. The antenna may be mounted up to 18” away from an enclosure within a hazardous location without an additional seal.

1. Analynk Wireless, LLC 790 Cross Pointe Road Columbus, OH 43230
Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com
CTX/CTM-1600-TF HAZARDOUS AREA
EXPLOSION PROOF ANTENNA FOR GPS/
GLONASS/IRIDIUM SATELLITES
• GPS L1: 1,575.42MHz
• Iridium: 1,616MHz to 1,626.5MHz
• GLONASS L1: 1,598 to 1,610MHz
• UL listed & ATEX, IECEx certified
• Internal seal fitting
• TNC Jack connector
• Mounting: ¾” NPT or M20
• Rugged Nickel Plated Brass mounting base
• Industrial temperature range -40o
C ≤ Ta ≤ +85 o
C
ATEX
ZONE 1
The CTX/CTM-1600-TF series of antennas are designed for use in “Hazardous-Classified”
and Industrial-Hardened applications. The antenna will operate in all three bands, GPS L1,
GLONASS L1 and Iridium. The antennas are omni-directional with 1dBic gain and designed
for flexible mounting on a variety of explosion proof housings or on ¾” rigid metal conduit
with a ¾” NPT pipe thread. The mounting base is made of heavy nickel-plated brass with an
integrated TNC jack coaxial connector for ease of installation. The radome is optimized for
rugged industrial applications while maintaining maximum radio frequency transmission and
reception efficiency. The antenna may be mounted up to 18” away from an enclosure within
a hazardous location without an additional seal. The CTX series has a 3/4” NPT mount and
the CTM series has a metric M20 mount.
• Hazardous tank level monitoring
• Offshore platforms
• Chemical processing
• Power plants
• Utility systems where explosive gases
may be present
• Hazardous area computers
• Patented design
• Ships
• Trains
• Alarms
Typical Installation
(enclosure not in-
cluded)
LISTED
Class 1, Div 1,
Zone1
Groups, C & D
A
IECEx

2. Analynk Wireless, LLC 790 Cross Pointe Road Columbus, OH 43230
Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com
RUGGED INDUSTRIAL RADOME
INTEGRAL FLAMEPROOF SEAL
3/4” NPT THREAD CTX or OPTIONAL M20
Specifications
Impedance: 50 Ω
Gain: 1.0 dBic typical, 0.5dBic minimum
VSWR: 2:1 max
Polarization: RHCP
DC Grounded: DC Shunt, Input
Azimuth FOV: Omnidirectional
Elevation FOV: +20o
to 90o
Zenith
Axial ratio: 1dB maximum at Zenith
Maximum power: 2 Watts
Certifications
UL listed for the following locations: Class I Div 1, Groups C, D -40o
C ≤ Ta ≤ +85 o
C, Class I
Zone 1 AEx d IIb T5, Ex d IIB T5 -40o
C ≤ Ta ≤ +85 o
C. CE 0539 II2G Ex d IIB T5, DEMKO
08 ATEX 0727941X, IECEx (see documents 35105 and 35106 for safe installation)
Ordering Information (other frequencies available, contact factory for details)
Part Number Frequency Mounting Base
CTX-1600-TF 1,575.42 through 1,626MHz 3/4” NPT Thread
CTM-1600-TF 1,575.42 through 1,626MHz M20 Thread
TNC JACK CONNECTOR
5.45”
138mm
CTX/CTM-1600 SERIES
PRELIMINARY