1. Andrew A. Kranak
(602)459-2379 ● Drey_k@yahoo.com Mesa, Az 85209
Summary
Electronics Technician with a proven track record of troubleshooting in production and prototyping
environments. Performing preventive maintenance on a wide array of digital, analog,
electromechanical systems. Equipment Installation and Maintenance. Driving business goals
through process improvement and approaching problems with innovation, attention to detail and
effective communication to deliver strong and consistent results.
SKILLS & EXPERIENCE
 CIS Certified IPC Specialist
 Installation, monitoring, and maintenance of equipment
 Use of O-scope's, Digital multi meters, spectrum analyzers
 Maintenance in compliance with specified procedures
 Network troubleshooting
 Soldering, rework of SMT and through-hole components
 Systems level testing
 Bench level testing
 Bed of nails testing
 Root cause analysis
 Work in a Class 10K & 100K clean room environment
 Identification of system faults and troubleshooting barriers
 Plug building and harnessing
 Conduct routine maintenance tasks and update maintenance records
 Read and interpret schematics, CAD models, system flow chart diagrams, and, BOM’s
MILITARY EDUCATION
Naval Technical Core School: Fundamentals of Computers and Basic Electronics
Naval A School: Advanced Fire Control for Radar and Weapon systems
Naval C School: Computer Peripherals, Electromechanical Systems, Analog Systems, Digital
systems, & Radar systems (operation, maintenance, and repair)
Gauge Calibration, NTC San Diego: Temperature and Pressure Gauges
Naval Fiber Optics for Advanced Computer Systems: Fiber Optic Plug Building, Fiber Optic
Troubleshooting & Repair
WORK EXPERIENCE:
RF Test Technician 2014-Current
Orbital ATK – Gilbert, AZ-(Contract)
 Support electrical and radio frequency testing and integration for the Iridium NEXT space
vehicle program
 Perform RF and electrical tests.
 Set up and operate instrument test articles with thermocouples, test heaters, and other
instrumentation per assembly drawings
 Operate thermal test chambers, controllers and instrumentation
 Follow test procedures with minimal oversight
 Operate test equipment through custom software interface screens
 Support 5S/clean work area initiatives and FOD control
 Record detailed descriptions of actions and events in test logs
 Support equipment calibration with calibration service providers
Assembly & Test Technician 2014-2014 Dec
Honeywell – Tempe, AZ-(Contract)
 Production assembly, rework, build by print, and TQC 980 / 990 operations.
 Interface with team members in order to solve issues and complete tasks.
 Support Honeywell Operating System culture and activities including 5S, Continuous
Improvement, Kanban supply systems, and uses of visual management to escalate
issues and track
metrics.
Production Technician 2012-2014 May
Wamore Inc. – Phoenix, AZ

2.  Build engineering prototypes and released, production items
 Assemble mechanical and electrical components using a variety of tools to job
specifications
 Complete workmanship per quality checks and process flow monitoring
 Troubleshoot failed assemblies to determine non-compliance
 Use test equipment such as multi-meters, oscilloscopes, spectrum analyzers, etc.
 Maintain tools and equipment in proper working order
 Projects while with Wamore Inc.
WA-8500's WGRM (Wireless Gate Release Mechanism), Manufacturing Process
Development and Production Assembly
WA-8000 MCS Kit (Master Control Station), Manufacturing process development and
Production assembly
JPADS ULW, Production assembly
JPADS 2K, Production assembly and Repair 2K AGU's
JPADS 2K MAGU, Production assembly, Upgrade MAGU to Peel N Stick Keypad and
Upgrade MAGU's to Drop in Keypad
MAGU LFX Battery Pack, Production Assembly
JPADS 2K Spread Bench, Assembly and Wiring harness design
JPADS 2K FMR Spread Bench, Assembly Wiring harness design
JPADS 10K, Calibration and burn in, Maintenance and Production assembly
JPADS 10K Spread bench, Assembly and Wiring harness design
Microfly waterproofing conversion, assembly
4K, Assembly for research and development
ERG (Electromechanical Release Gate), Assembly for research and development
ACPRS Advanced Cargo Parachute Release System, Production Assembly and
Manufacturing process development
IDOC, Production Assembly
IDAC, Production Assembly
ITRAQ, Production Assembly
Sales & Market Representative 2010 - 2011
Hopkins Agriculture – Orange County, CA
 Represented Hopkins products in markets throughout Orange County
In-Circuit Test Technician Lead (Consultant), 2008 - 2009
Cherokee International – Tustin, CA
 Tested/Troubleshot and repaired power supply assemblies
 Troubleshoot circuit card assemblies to component level
 Performed design verification
 Created and modified test programs as well as performed preventive maintenance for the
PT960 in-circuit test machine (Bed of nails Test system)
 Supervised and coordinated test operators to ensure seamless production on 4
production lines
 Supported operators through the resolution of complex technical issues
 Assisted RMA department in overflow troubleshooting
 Maintained fault logs and communicated fault trends to engineers and SMT production
operators
 Ensured the proper function and maintenance of over 100+ test
fixtures
Fuel Reduction Analyst 2004 - 2006
(Independent Contractor) Wilderness Property Owners in Oregon
Identified short and long-term management goals to create defensible space and defensible fuel
profile zones in compliance with property owner’s vegetation management program
ARMED FORCES EXPERIENCE
United States Navy – U.S.S. Howard 1998 - 2004
CFO3 Maintenance Man – Petty Officer, 2nd Class
 Installed, maintained, repaired and operated:
 ORTS (computer controlled test system, automatic fault detection/isolation, status
monitoring, system reconfiguration)

3.  400Hz Power Converters
 Mk 99 FCS (digital to analog converters, radar directors, fire control computers)
 Maintained and Tested (Digital, Analog and RF) Circuits and Devices
 Joined network installation team to wire network switches for NTC San Diego while
assigned to pre-commissioning detachment
 Verified ship building compliance as part of quality control assurance team during pre-
commissioning of USS Howard
 Stood Missile System Supervisor for Testing SM2 missiles, Operated Telemetry gear for
Testing SM2 missiles
 Responded to emergency events such as power loss, cooling faults, fires, flooding and
security alerts.
 Volunteered as gauge calibration technician responsible for the certification and
maintenance of all fire control gauges onboard ship
 Secret Clearance
 Received Honorable Discharge
AWARDS
Good Conduct Medal
Plank Owner, USS Howard