1. imrpimiendo la informacion del comando ifconfig
usage: ifconfig <interface> | -a[ 4 | 6 | D ][ u | d ][ Z ]
[ <addr_family> ]
[ <address>[/<prefix_length>] [ <dest_address> ] ]
[ set [ <address>][/<prefix_length>] ] [ <address>/<prefix_length>] ]
[ destination <dest_address> ]
[ addif <address>[/<prefix_length>] [ <dest_address> ] ]
[ removeif <address>[/<prefix_length>] ]
[ arp | -arp ]
[ auto-revarp ]
[ broadcast <broad_addr> ]
[ index <if_index> ]
[ metric <n> ] [ mtu <n> ]
[ netmask <mask> ]
[ plumb ] [ unplumb ]
[ preferred | -preferred ]
[ private | -private ]
[ local | -local ]
[ router | -router ]
[ subnet <subnet_address>]
[ trailers | -trailers ]
[ token <address>/<prefix_length> ]
[ tsrc <tunnel_src_address> ]
[ tdst <tunnel_dest_address> ]
[ auth_algs <tunnel_AH_authentication_algorithm> ]
[ encr_algs <tunnel_ESP_encryption_algorithm> ]
[ encr_auth_algs <tunnel_ESP_authentication_algorithm> ]
[ up ] [ down ]
[ xmit | -xmit ]
[ modlist ]
[ modinsert <module_name@position> ]
[ modremove <module_name@position> ]
[ group <groupname>] | [ group ""]
[ deprecated | -deprecated ]
[ standby | -standby ]
[ failover | -failover ]
[ zone <zonename> | -zone ]
[ usesrc <interface> ]
[ all-zones ]
or
ifconfig <interface> | -a[ 4 | 6 | D ] [ u | d ]
auto-dhcp | dhcp
[ wait <time> | forever ]
[ primary ]
start | drop | ping | release | status | inform
imprimiendo los procesos correspondientes a la cuenta en uso
ps -a
PID TTY TIME CMD
807 pts/2 0:00 sh
822 pts/2 0:06 gnome-se
854 pts/2 0:24 gconfd-2
857 pts/2 0:00 gnome-ke
819 pts/2 0:00 Xsession
859 pts/2 0:01 xscreens
1899 pts/3 0:00 ps

2. :wq!