1. ARTHIT KLIANGPROM
SENIOR SYSTEM ENGINEER
Name: Arthit Kliangprom
Title: Sr.System Engineer
Birth Date: 5/August/1982
Nationality: THAI
Identity Card No.: 3320300140641
Email Address: Arthit.kp@gmail.com
Mobile Phone No.: +66845553607
EDUCATION
• June 2002 - May 2005 Bachelor Degree of Electrical Engineering, Burapha University.
• 2001 Hi School Thatumprachasomewit School.
Arthit commenced his professional career in 2005 working Industrial in DCS/PLC and control
engineering (DCS, SCADA, Sequence Control, HMI Display, 3rd party interface, etc). Develops project
documentation (Functional Design Spec, Detail Design Spec, Cabinet Drawing, etc). and develops
automation Hardware settings (Networking, Server, Profibus devices). had been experience with
Electrical Power System Design. Power Distribution System Design Perform FAT, SAT, site
commissioning and start-up process.
ELECTRICAL AND CONTROL SYSTEM EXPERTISE
• Motor Control with VSD (Inverter Drive).
• Instrument (Tansmitter, Control Vavle, Shutdow Valve, Sensor etc.).
• IEC 61131 programming language.
• Siemens STEP7, Siemens TIA.
• Allen Bradley PLC (PLC5, SLC500, ControlLogix).
• Honeywell EPKS R400, R410 and C300 Hardware.
• 800xA (ABB) Programming.
• Triconex.
• Industrial Communication Bus.
• 2D Auto CAD.
BIOGRAPHY

2. ARTHIT KLIANGPROM
SENIOR SYSTEM ENGINEER
INDUSTRY SECTORS
• Oil & Gas.
• Petrochemical .
• Mining.
• Utility (Power Plant & Water Plant)
TRAINING
• Motor Control with VSD (Inverter Drive)
• Instrument (Transmitter, Control Valve,
Shutdown Valve, Sensor switch, etc.).
• Allen Bradley (PLC5, SLC500,
ControlLogix)
• Siemens Step7/TIA
• ABB 800xA.
• EPKS R400, R410, R430.
• MOG Industry Training (Helicopter
Underwater Escape).
PROFESSIONAL EXPERIENCE
Pressent : SpiePlexal (Thailand) Ltd.
Positrion: Senior System Engineer
• Mercury Removal Unit for North Pailin
Project by Triconex Programming.
• Electrical design for Main Distribution
Board, Distribution Panel.
• Inspect and calibration for instrument
CardinalHealth Project.
• Design Electrical Utility data and cable
schedule. Project Specification of
electrical general and Control Module
for CALIGALI-PTTEP project.
• Cable schedule, Calculate voltage drop.
Prepare and develop single line diagram
• Design for single line diagram.
• Maintenance Troubleshooting, On-site
services etc.
May 2015-Dec 2015:Exterran (Thailand)
Position: IE Control System.
• Offshore maintenace for Instrument and
Programming (Allen Braley PLC) of
Booster Compressor to service Chevron
Remote Platform Thailand.
• Inspect and Calibrate Instrument
( Transmitter, Control Valve, Shutdown
Valve, Sensor switch).
Mar 2015-Apr 2015: Honeywell
Position: Senior Project Engineer
Lemongrass Project (BASF PETRONAS)
• Support Honeywell Malaysia for EPKS
R430 programming.
UVH Project (IRPC)
• Support Honeywell Korea for EPKS
R430 programming.
Linear Alkyl Benzene Project (Thai Oil)
• EPKS R410 Programming.
• Server system set up.
BCP DCS Plant 2 Improvement Project
• Support Honeywell Thailand for EPKS
R410 programming and commissioning.

3. ARTHIT KLIANGPROM
SENIOR SYSTEM ENGINEER
Micco an Project 200,000 MTPY (Vietnam)
Project
• EPKS R400 Programming.
• Server system set up.
By product value added Project (PTTGC).
• EPKS R400 Programming.
• Hardware System design.
• Server system set up.
Siam Cellulose DCS Replacement
Project. (SCG)
• Support Honeywell Thailand for EPKS
R400 programming and commissioning.
Revamp of control system for PP1& PP2
Project (HMC)
• Support Honeywell Thailand for
EPKS programming and commissioning.
Revamp of control system for Tank Farm
2 Project (IRPC)
• Hardware System Design.
• Support EPKS programming.
• Commissioning.
Revamp of control system for NTU
Project (IRPC)
• Provide support to Lead Engineer in
Hardware.
• Commissioning.
ABT Windmill Project (Solvey)
• EPKS Programming.
• Provide support to Lead Engineer in
Software Application engineering
Feb 2007-Mar 2011:ABB (Thailand) Ltd.
Position: Control and System Engineer.
Cooling Tower Project: North Bangkok
(EGAT)
Appointed as Control and System Engineer
under guidance of Project Manager to
design, build and commissioning.
Responsibilities for this project include
• 800xA Programming.
• Hardware System design.
• Disign Electrical Utility, cable schedule,
single line diagram and schematic
diagram.
• Site Commissioning.
• Appointed as Automation System
Engineer under guidance of Project
Manager to design, build and
commissioning.
Water Treatment: North Bangkok (EGAT)
Appointed as Automation System Engineer
under guidance of Project Manager to
design, build and commissioning.
• 800xA Programming.
• Hardware System design.
• Electrical Power Distribution Design
• Responsibilities for this project
include:
• Calculate power system ( short circuit,
load flow and motor start)
• Project engineering design
• Development of System Engineering
Drawings, Termination Drawings, I/O
Assignment, Application Logic
Programming.
• In-house testing and Factory
Acceptance Testing.
• Site Acceptance Test (SAT)
• Site Commissioning.
DCS & Governor Unit 1-2 Revamp
Project. (Phumiphol Dam)
• Project engineering design.
• Prepare and develop Electrical Utility
data and cable schedule.
• Prepare electrical power system.
• Calculate voltage drop.
• Prepare and develop single line
diagram.
• 800xA Programming.

4. ARTHIT KLIANGPROM
SENIOR SYSTEM ENGINEER
• System hardware configuration
Development of the Hardware and
Software Functional Design
Specification.
• Development of System Engineering
Drawing, Termination Drawings, I/O
Assignment.
• In-house testing and Factory
Acceptance Testing.
• Site Acceptance Test (SAT).
• Site Commissioning.
Jun 2005- Jan 2007: Thai copper
Industrial Ltd.
Position: DCS/PLC Engineer
-Troubleshooting and problem solving for
plant PLC and DCS hardware and software.
-Commissioning and Start up Oxygen Plant.
-Commissioning and Start up Smelter Plant.
-Commissioning and Start up Scrap Press
Machine.
-Provide support to operations, maintenance
(instrumentation and electrical) and
Production for troubleshooting.
-Installation and modify hardware and
application logic programming.
-Maintenance for ABB DCS and Allen
Bradley PLC, Siemens PLC,
Yokogawa Centum3000.
Summary of Skill
• Have extensive experiences on various project implementation activities, troubleshooting and
problem solving for plant.
• Project engineering design.
• Electrical Power Distribution Design single line diagram and schematic diagram.
• Cable schedule, Calculate voltage drop
• System hardware configuration.
• Development of the Hardware Functional Design Specification.
• Development of the Software Functional Design Specification.
• Developing of System Engineering Drawing, Termination Drawings, I/O List, HMI graphics,
application Logic Programming, Loop Drawings.
• In house testing and Factory Acceptance Testing.
• Plan function test and loop test.
• Site commissioning.
• Service maintenance and troubleshooting.

5. ARTHIT KLIANGPROM
SENIOR SYSTEM ENGINEER
Instructor for training course
Composer Automation Acrhitect and
Harmony Hardware.
• Site commissioning.
• PTT Chemical, Bangkok (10 Days)
• Glow SPP (Group1) Bangkok (5 Days)
• Glow SPP (Group2) Bangkok (5 Days)
• Glow SPP (All Automation owner)
Rayong (5 Days).
800xA Industrial IT and Control Builder
AC800M.
800xA System for Operator.
• EGAT Bhumibol Dam (Group1)
Bangkok (5 Days)
• EGAT Bhumibol Dam (Group2)
Bangkok (5 Days)
• EGAT Bhumibol Dam (All Operator
Owners), Bhumibol Dam, Tak Province
(4 Days).
• EGAT North Bangkok Power Plant, Bangkok.