10 years experiences in Oil and Gas projects.

1. Asad Ahsan
Lead QA/QC Inspector (Mechanical & Welding)
CERTIFIED Welding Inspector (CSWIP 3.1)
CSWIP Certificate Number # 56613
NDT Level II (VT, PT, UT, MPI, RT)
Email ID: asad_bem@yahoo.com
Cell: 00966582087587
00966582087587
STRENGTHS:
Self starter & result oriented, task & resource planning, strong leadership, Capable of handling
challenging & difficult situations under pressure, Hard working & honor the commitments, Spark &
potential of learning new concepts, techniques & methodologies in technical and management areas.
PERSONAL INFORMATION:
Date of birth : 11 November 1983
Nationality : Pakistan
Religion : Muslim
Marital status : Married
Driving License : Saudi Arabia & Pakistan (valid)
Iqama : Transferable
QUALIFICATION:
1. Associate Engineer Mechanical Technology
Govt. Poly Technical institute Lahore (Punjab Board of Technical Education)
SESSION (2000-2003) 2nd Division
COMPUTER SKILLS:
• Auto Cad 2D , Computer Fundamentals, Windows Operating System
• M.S Word, M.S Excel, M.S Power point
EXPERIENCE (10 Years):
Presently working with TYPSA Consulting, Engineering as Lead QC Welding Inspector at
Strategic Reservoirs in BARIMAN (Phase 2) Jeddah Project.
October 2010 – September 2015
1) Arabian Bemco Contracting Co. Ltd., KSA
Position: QA/QC (Welding Inspector)
Project: Power Plant PP-12 Riyadh & Qurayyah Combined Cycle Power Plant Project
1

2. (QCCPP) Phase II
October 2009 – September 2010
2) Bemco Steel Industries Co. Ltd., KSA
Position: QA/QC (Piping & Tanks)
Project: Power Plant PP-10 Riyadh
Duties and Responsibilities Include:
• Check the joint preparation and fit up of piping & equipment of different material as per
WPS & Drawings
• Inspect the welding as per WPS, Specifications and Codes
• Verify the filler wires and electrodes as per WPS
• Prepare and maintain the record of all fit up and welding on daily basis
• Conduct & witness the WQT of pipe and plate welders
• To check the RT films of welders for updating their repair %age log.
• Maintain a master list of qualified welders and maintain the welder continuity log.
• Check the electrode baking and issuance log daily
• Check the calibration and working condition of baking and holding ovens
• Issue copy of WPS to the concerned persons (welding supervisor) according to base
material
• Check the welder cards of welders working on job at site area to verify their qualification
for particular job being welded.
• Prepare welding summery of test packs.
• Perform the final box up inspection of static equipment.
• Prepare dossier of equipment and piping system as per project technical specifications.
Responsibilities as Mechanical inspector (piping) include:
• To do Inspection of Piping fit ups as per ISO drawings
• Piping system walk down inspection and preparing punch list of discrepancies
• Witness of hydro testing of piping system and preparing inspection reports
3) Metscco Heavy Steel Industries Co. Ltd., KSA
May 2007 – August 2009 and November 2010 – May 2012
Position: QA/QC Engineer – Mechanical
Project: Erection of Oil & Water Storage Tanks
RESPONSIBILITIES:
• Qualification of welders / welding operators in accordance with ASME Sec IX & AWS
D1.1
2

3. • To maintain welders / welding operators continuity log.
• Raise NCRs against deviations/violations and closing the same after proper corrective
actions
• Ensure that welding is performed as per approved welding procedures.
• Co-ordination with Customer Inspector, ASME Authorized Inspector for carrying out
external inspections
• Material Verification of boilers according to Drawings & cutting plan
• Check Marking of Nozzles, Pads, Man holes, Head holes and other boiler accessories as
per Drawings.
• Visual Welding inspection of Nozzles, Pads, Man holes, Head holes, end plates,
Circumferential as well as longitudinal shell joints, other boiler accessories and referring
them for Radiographic Testing
• Check the internal & external cleaning of Tank before Hydrostatic test.
• Witnessing Hydrostatic tests of pressure vessels as per governing codes, applicable
drawings and client specifications.
• Carrying out Peaking, Banding, Plumbness, and Roundness Inspections
• Check data punching in accordance with TPIA reference
• Preparation of Dossier for submission to the Third Party Inspector
4) Arabian Bemco Contracting Co. Ltd., KSA
December 2004 – March 2007
Position : Inspector QA/QC
• Visual & Dimensional inspections of Welding and performing Dye Penetrant Test
• To conduct Welder / Welding Operator’s Qualification test in accordance to ASME Section
IX.
• Coordination with Third party inspectors, Client Inspectors and Authorized Inspector
Codes & Standards Awareness:
AWWA D100, API 650, API 620, API 1104, & ASME B31.1, ASME B31.3.Saudi Aramco
Standards
3

4. Projects Worked on:
1. Reinforcement of 3 Nos. Dia. 37.5 M, Treated & untreated Crude Oil Storage Tanks at Al-
Qurayat Power Plant Project (Metscco / SSEM/ SEC)
2. Fire Water Tanks 4 Nos., Dia. 20 M at PP-09 Power Plant (Bemco Steel / SEC)
3. Pipe Line Works Dia. 250, 350, 450, 550, 650, 750 mm Line Pipe at PP10 Power Plant (Bemco
Steel/SEC).
4. Construction of Treated Crude Oil Storage Tanks - 3 Nos., Dia. 38 M at Jizan Power Plant
Extension Project (Al-Tokhi / SEC)
5. PP-9 Riyadh Extension Tank Farm Project - Construction of Treated Crude Oil Storage Tanks
4 Nos., Dia. 54 M. (Arabian Bemco / SEC)
6. Inlet Air Cooling System in PP-9 Block C – Thermal Water Storage Tank 34.2 m ID X 22m
Height (BEMCO/ SEC).
7. Inlet Air Cooling System in PP-9 Block D – Thermal Water Storage Tank 34.2 m ID X 22 m
Height (BEMCO/ SEC).
8. PP9 Extension Project 20 Nos. Exhaust Stacks (Bachman Industries Inc. / BEMCO/SEC).
9. Tabouk Power Plant – 3 Nos., Exhaust Stacks (Bachman Industries Inc. / National Contracting
Co. Ltd /SEC)
LANGUAGES KNOWN:
Professional proficiency in English, Arabic, Urdu & Hindi
PERSONAL INFORMATION:
Date of birth : 11 November 1983
Nationality : Pakistan
Religion : Muslim
Marital status : Married
Driving License : Saudi Arabia & Pakistan (valid)
Iqama: Transferable
Updated on : 11/06/2015
(Nothing beyond this line)
4