This curriculum vitae is for Redouane Berriche, an Algerian national with over 15 years of experience in various drilling roles including driller, assistant driller, derrickman, and floorman. He has worked extensively with Saipem drilling in both Algeria and Saudi Arabia, and has experience operating land rigs with equipment like drawworks, top drives, mud pumps, and BOP systems. He is skilled in well drilling, completion, and maintenance operations.
1. CURRICULUM VITAE
PERSONALDETAILS:
NAME: BERRICHE Redouane
ADDRESS: Algeria - Biskra - Sidi Khaled
DATE OF BIRTH: 25-02-1979.
MARITAL STATUS: Married
NATIONALITY: Algerian
PASSPORT: Available
MOBILE: 00213-555-400- 002
E-MAIL: redouaneber@yahoo.fr
SKYPE: redouane075
EDUCATION: Secondary school
INFORMATICS: Mastering office, internet and maintenance
IWCF: Valid IWCF Certificate (Level 3).
From 21/02/2015 to 20/02/2017
LANGUAGE: Arabic: Mother tongue
English: Writing, reading and speaking
French: Writing, reading and speaking
ONSHORE RIGS SPECIFICATIONS:
Land drilling rigs: 1500 HP – 2000 HP – 3000 HP
Top drive Varco or NOV TDS 11
Draw work Joystick Cyber chair & Traditional brake (HH & National)
Mud pump: 12-p-160 – 1600 HP & 10-p-130 – 1300 HP (HH & National)
Electricalsystem: VFD & SCR (Bentec & HH)
Anti-collision system: Bentec & HH (Electrical)
Engine: Caterpillar 3512
2. EXPERIENCEHISTORY
2016 till now Driller with Saipem drilling KSA Branch
2015 to 2016 Driller with Saipem drilling Algeria Branch
2011 to 2014 Driller with Saipem drilling Algeria Branch
Experience in exploration and development drilling well
Inspects, and maintains all traveling and rotating equipment (Draw works,
Top Drive, handling tools, etc.)
Operates drilling equipment and ensures safe and efficient procedures are
followed during rig up/down and drilling operations.
Inspects rig up/down of derrick and associated equipment; checks mud
properties and flow.
Monitors drilling conductorhole, surface hole, and main hole.
Trips and monitors drilling string; runs and monitors cement casing.
Manipulates the control console on the rig floor.
Operates the pumps during the well controloperation; records data on the
Well Control Record.
Performs inspections of drilling and pump equipment as required; reports
and/or takes appropriate action on all potential hazards.
Checks the operation of the slow pump rates in accordancewith
established procedures.
Take immediate actions to shut down drilling operations and secure well
in case of a blowout.
Completes the IADC and daily reports; prepares handover notes for relief
drilling Staff.
Ensure all BOP and Diverter test information, and documentation, test
charts are properly finished.
Assist with the maintenance and repairs to the rig floor equipment.
Organizing, controlling, supervising and directing all activities on the drill
floor, in the mud room and mud pump room.
3. 2009 to 2011 Assistant driller with Saipem drilling Algeria Branch
• Supervises casing operations, including stab casing, lining up threads,
valves, pumps and fluid system, casing fill-up, mixing, and monitoring
returns.
• Inspects Top Drive, torque equipment, and related equipment for proper
functioning.
• Assists in nippling, maintaining, and repairing blowout prevention (BOP)
equipment.
• Assists in other areas of the drilling operation as directed.
• Acts as a lead in the pump area, mud pits, and rig floor based on direction
from the Driller.
• Ensures correctsafety procedures are followed; assists in training drill
crew.
• Directs and coordinates crew members in the performance of work duties
and priorities.
• Prepares required work permits, risk assessments and ensures Stop Work
Authority and Job Safety Environmental Analyses usage.
• Schedules equipment maintenance and repair with other department
personnel, such as Drillers, Electricians, and Crane Operators.
• Prepares handover notes for relief staff.
• Performs all duties in accordancewith the Permit to Work system.
• Supervising the Roustaboutassigned to assist in these areas.
• Provide occasioned relief to the Floorman on the drill floor.
• Provides assistance in other areas of drilling operations as directed.
• Provide occasionalrelief to the Driller when trained.
• Performs other duties and special projects as requested by management.
2006 to 2009 Derrickman with Saipem drilling Algeria Branch
• Maintains equipment in the pump area and mud pits; informs the Driller
or Driller Trainee of any problems or unexpected variations in the drilling
fluid, mud properties, and pit level.
• Lines up mud gas separator, degasser, and mixing pumps.
• Mixes and maintains the condition of the drilling fluid.
• Mixes the mud in accordancewith the Mud Engineers specifications;
checks weight and viscosity, calculates pit volumes, and monitors returns
from shaker house.
• Logs drilling fluid properties and quantity of drilling chemicals and mud
materials used each tour.
• Monitors the high-pressure mud pumps, making certain that the condition,
fluid levels, lubrication, and calibration of the equipment is correct;
4. performs preventive maintenance on the high pressure mud pumps and
replaces fluids as needed.
• Operates, cleans, performs preventative maintenance, and repairs mud
mixing pumps, charging pumps, solid controlequipment, and related
equipment.
• Maintains a clean and safe area.
• Derrick Operations
• Inspects the derrick on a weekly basis in accordancewith approved
checklist.
• Handles tubular in the derrick or on the rig floor; checks fluid transfers,
and returns and prepares stand to rack and run.
• Handles the upper end of the drill string as it is being hoisted out of or
lowered into the hole.
• Maintains derrick by inspecting lines, ropes, hoist, monkey board, derrick
fingers, tubing and stabbing boards, sheaves, crown block, bolts, pins,
welds, and other lines and equipment attached to the derrick; lubricates air
hoists, sheaves, and fast line guide, performs basic repairs and replaces
defective parts.
2005 to 2006 Floorman with Saipem drilling Algeria Branch
Tightens/loosens drill pipes and makes/breaks tubular connections.
Tails, stabs, rack backs, and handles drill string, casing, and tubing.
Makes up/breaks out stands and racks pipe in the derrick.
Performs rig-ups and uses rig floor equipment.
Lines up and bleeds down pressure from lines, valves, and equipment.
Performs routine maintenance on the rig floor, including greasing of fittings and
other lubricationpoints and replacementof tubularbox and pinconnections, dies,
nuts, bolts, etc.
Repairs hand and power tools.
Maintains wire ropes and cables.
Bundle, move, rack, and maintain tubular goods.
Installs stopcollars and centralizers on casing.
Performs housekeeping onthe drill floor; conducts inspections as requested.
Takes mud samples, and checks weight and viscosity; maintains documentation.
Assists Derrick man in mixingand handling mud and chemicals; adjusts the flow
ofmud.
Maintains, repairs, adjusts shaker equipment and assist with maintaining of all
solid control and mixing equipment.
Monitors hole foradequate fill.
Performs maintenance and simple repairs on blowout prevention (BOP)
equipment under supervision.
Performs all duties in accordance with the Permit to Work System.
Performs other duties as assigned bymanagement.
5. 2003 to 2005 Roustabout with MS Company
Assist the Crane Operator with the rigging of equipment, supplies,
tubular, pipe and casing that needs to be moved or relocated throughout
the rig.
Inspects and rigs loads using slings, tag lines, chains, shackles, lift caps,
hooks, chain binders, etc.; hooks and unhooks the crane from slings,
equipment, etc..
Assist in handling and mixing mud and chemicals safely, and disposes of
debris properly.
Fills in as a relief worker for the drill crew.
Greases and maintains the hatches, wedges, fire flaps, and cargo gear.
Assist in assembling, dismantling, maintaining and lubrication deck
machinery and other equipment.
Organizes equipment and materials on the deck to provide adequate
working area.
Maintenance, washing, and cleaning up of the drilling rig which can
include, but not limited to, chipping and painting decking and equipment.
Prepares surfaces for painting using power tools; selects and uses proper
equipment.
Performs other duties as assigned by management.
TRAINING:
Lifting and slinging operations
Hazard identification
Personnel protective equipment’s
breathing apparatus use
Electrical hazards
Work permits
Material safety data sheet
H2S.
Fire fighting
First aid...
HSE induction by line management.
Use of breathing sets.
Authorized gas tester.
Emergency response.