6. SRAM also known as Cache is used to store the most used data.
It provides faster access to data than retrieving it from the slower DRAM,
The three main types of cache memory are L1, L2 and L3.
L1 is cache memory integrated into the CPU. L2 is cache memory which is
also integrated into the CPU. L3 is cache memory is used on only some high
end workstations.
7. Dynamic Temporary Storage often refers to computer components and
recording media that retains data.
Dynamic Temporary Storage is the core function of computers in memory.
There are many different types of memory like:
-SDRAM
-GB PATA
-SDLT
8. EEPROM (Electrically Erasable Programmable Read-Only Memory) is a type of
memory that can retain the stored information even when not powered on.
EEPROM has helped make Flash Memory for the computer which basically
does the same job to EEPROM.
The data must be saved before the computer is powered off.
9. Flash Memory is also memory that can retain stored data even when the
computer is not powered on, which can be electrically erased and
reprogrammed.
It was developed by EEPROM (Electrically Erasable Programmable Read-Only
Memory).
The data must be erased in quite big blocks before they can be rewritten with
new data.
USB Memory Sticks and Memory Cards are types of Flash Memory.
10. Adapter Cards are used to give a lot more capability of the computer by
expanding and customizing it.
There are lots of different kinds of Adapter Cards. There are Adapter Cards
like Network Interface Cards (NIC), Wireless NIC, Sound Adapter, Video
Adapter, Capture Card, TV Tuner, Modem Adapter, SCSI Adapter and RAID
Adapter.
11. Expansion Slots lets you plug in Adapter Cards on the Motherboard. The type
of Adapter Card must match with the expansion slot.
There are lots of different kinds of Expansion Slots like PCI, AGP, PCle, ISA,
EISA and MCA.
12. Storage Drives read or write information to optical storage media. It can
store permanent data or to retrieve information from a media disk.
SATA refers to the serial versions of the ATA drive controller. It uses a 7-pin
data connector.
PATA refers to the parallel version of the ATA drive controller interface.
SCSI can connect both internal and external drives. It uses 50-pin, 68-pin
and 80-pin connectors.
Partitioning and Formatting is when you set up a new, empty hard disk so
that you can put it into an Operating System.
13. An Input Device is used to put data into a computer by plugging it into the
computer.
Input Devices are devices like:
Mouse
Keyboard
Camera
Biometric Authentication Device
Touch Screen
Scanner
14. An Output Device is used to take information from a computer by using
special equipment.
Output Devices are devices like:
Monitors
Projectors
Printers
Scanners
Fax Machines
Speakers
Headphones
15.
16. Hey.
This is my presentation for you guys who are new to
using computers. Am I right.
I will tell you about those small components in a
computer. These are called ‘Internal Components’.
I will not tell you about each one in detail but I will
cut it down to the main parts of information.
17. The CPU stands for Central Processing Unit. It
controls everything on the computer.
RISC (Reduced Instruction Set Computer) and CISC
(Complex Instruction Set Computer) are the two types
of CPU.
Overclocking is used to make a processor work at a
faster speed than its original specification.
MMX is a set of multimedia instructions built into Intel
processors.
CPU size is measured in Bytes . CPU speed is measured
in GHz. Cool or what.
18.
19.
20. SRAM is known as Cache
It is used to store the most used data.
It provides fast access to data.
The re are three main types of cache memory. L1, L2
and L3.
21. Dynamic Temporary Storage is the core function of
computers in memory.
There are many different types of memory like:
-SDRAM
-GB PATA
-SDLT
22. EEPROM stands for Electrically Erasable Programmable
Read-Only Memory).
It is a type of memory that can delete the stored
information even when not powered on.
The data must be saved before the computer is
powered off.
23. Flash Memory is memory that can delete stored data
even when the computer is not powered on.
It was developed by EEPROM
USB Memory Sticks and Memory Cards are types of
Flash Memory.
24. Adapter Cards give a lots of capability to the
computer by making it bigger and customizing it.
There are lots of different kinds of Adapter Cards.
Network Interface Cards (NIC), Wireless NIC, Sound
Adapter, Video Adapter, Capture Card, TV Tuner,
Modem Adapter, SCSI Adapter and RAID Adapter.
25. Expansion Slots lets you plug in Adapter Cards on the
Motherboard.
The type of Adapter Card must match with the
expansion slot.
There are lots of different kinds of Expansion Slots .
PCI, AGP, PCle, ISA, EISA and MCA.
26. Storage Drives read or write information to optical
storage media.
SATA refers to the serial versions of the ATA drive
controller.
PATA refers to the parallel version of the ATA drive
controller interface.
SCSI can connect both internal and external drives.
Partitioning and Formatting is when you set up a new,
empty hard disk so that you can put it into an
Operating System.
27. An Input Device is used to put data into a computer by
plugging it into the computer.
Input Devices are devices like:
Mouse
Keyboard
Camera
Biometric Authentication Device
Touch Screen
Scanner
28. An Output Device is used to take information from a
computer by using special equipment.
Output Devices are devices like:
Monitors
Projectors
Printers
Scanners
Fax Machines
Speakers
Headphones