1. #2
#1#3
#4
#5
#6
#7
#8
#9
#10 When
Pushed IN!
#11
#12
#13

2. Sewing Machine with Thread & Spool Cap
Threading the Machine:
Place thread spool on the spool pin (A), cover with the spool cap (B)

3. Thread goes from the spool pin to the metal thread guides C & D, then is
pulled straight down.

4. Pull thread straight down & wrap under
the tension dial & follow arrow up
Thread now gets looped though the
tension guide (E). If you do not see the
tension guide, turn the hand wheel on the
right side.

5. Pull thread straight down. The thread
crosses a metal bar (F) then is looped
through a hook at the top of the needle
(G).
Eye of the needle (H)

6. Thread the eye of the needle, front to back (H)

7. Needle threaded.

8. Bobbin Pin (I)

9. Bobbin Pin: (I) Bobbin: (J)
Place bobbin on bobbin pin, pull bobbin down.

10. Thread machine as before. Stop & bring over to (K). Wrap around
bobbin, following arrow direction.

11. Step on foot peddle & fill bobbin with thread. Remove & put bobbin
pin in up position

12. Bobbin Casing (J) – leave a tail of thread & hold. Drop bobbin into the
bobbin case (J).

13. Bring thread around the bobbin & hook behind metal finger (L).

14. Take up lever (M)