10 years experience in tool and die maker,manufacturing of Mouds and die maintenance
1. Mr. Brijesh S Ulvi
Mobile No: 060-102470646
E-mail Id: brijeshulvi2014@gmail.com
CAREER OBJECTIVES:
Seeking a Challenging and growth oriented profession in Manufacturing,Maintenance &
Engineering, where I can utilize my technical background for the benefit of the organization.
SYNOPSIS :
Tool and Die maker with 10 years experience in maintenance,repairing,modifying and trouble
shooting of al types og plastic injection moulds,installation and maintenance of hot runner
system,manufacturing and repairing of jigs,fixture and various types of mechanic devices.
Presently working as a Mould Engineer in Sun Hi-Tech SDN BHD,Selangor serikembanagan
kuala lumpur MALAYSIA in Assembly department from 1st
August -2014 to till date.
COMPANY PROFILE:
Sun Hi-Tech SDN BHD Specialize in manufacturing of plastic Mould,was established
in 1988 with a commitment to provide to our clients the finest and the best quality
product in the field of plastic Injection Mould, Home Appliances, Automotive Part,
Car Battery, Large and complicated molds and capable of making molds for 3000 ton
injection molding machine. The main customers are
TOYOTA,HONDA,PROTON,HICOM.
RESPONIBILITIES:
Manufacturing and Maintenance of plastic injection moulds Jig & fixture.
Carrying out trials of the tools to ensure that the customer requirement of the component
are met.
Documentation of mould base and inserts inspection reports
Responsible for new tools and part approval.
Perform breakdown,preventive maintenance,predictive maintenance,annual maintenance
of injection moulds and hot runner system
Maintain the spare mould elements and hot runner elements to reduce machine stoppage.
Carry out necessary Modification,ECI,corrections if required and to enhance the quality of
the tools.
Continuous improvement and implementation of new techniques to improve productivity
and to reduce production cost.
Trouble shooting of injection moulds during trial.
Manufacturing,maintenance & recording of special purpose machine.
2. Implementing KAIZEN,5S and 3S activities.
Maintaining the safety norms at the shopfloor.
ORGANIZATION : Denso kirloskar industries Pvt ltd.Nelemangala(Banglore).
DESIGNATION : Tool and Die Engineer I
DURATION : 1st March 2006 to 19th June 2014
COMPANY PROFILE:
Denso Kirloskar Industries pvt ltd,subsidiary of Denso CORPORATION JAPAN,It is overseas
group company, one of the leading global Automobile components suppliers,focus on value
added technologies,especially application for protecting environment and intelligent transport
system,an ISO/TS16949 &14001 company,the main product are
Radiators,condenser,HAVC,intercooler,Reserve tank,Fan,Shroud assembly,The main customers
are TOYOTA,HONDA,MARUTHI SUZUKI and VOLVO.
RESPONIBILITIES:
Manufacturing and Maintenance of Moulds,Pressdies and Jigs& fixtures.
Conduct established preventive and predictive maintenance schedule .
Carrying out trials of the tools to ensure that the customer requirement of the component
are met.
Resposible for audits and documentation of toolroom department,preparation of manual
and check sheet as per ISO/TS16949 & 14001.
Planning & monitoring of Spare parts for Moulds and Jigs &fixtures.
Responsible for new tools and part approval.
Carry out necessary Modification,ECI,corrections if required and to enhance the quality of
the tools.
Preparation of process plans,manufacturing and assembling of tools while ensuring that
the deadline is met.
Conduct first piece inspection and record data and confirm before production.
Analyzing and trouble shooting process failure mode effect analysis for high rejection
items and new product.
Implementation of TPM in the company.
Implemnetation of Poka-yoke
Assembly and maintenance of hot runner system used in injection moulds.
Trouble shooting of injection Moulds.
Trouble shooting of plastic injection molding machine.
Manufacturing,maintenance & recording of special purpose machine.
Manufacturing,maintenance,Inspection & calibration of jigs & fixture.
Process planning material procurement,vendor development Bom receiving,indent the
material and machine weekly scheduling.
Achieviving MTTR & MTBF targets
Spares parts inventory and budgetary control for all critical spares.
Implementing KAIZEN,5S and 3S activities.
Maintaining the safety norms at the shopfloor.
Presentation on improvement and achievement for Toolroom.
Motivating and leading a team of young leaders/members to achieve production and
maintenance targets and schedule.
3. ACOMPLISHMENT:
Involved in Development of New plastic Components for TOYOTA and HONDA.
Improvements done to avoid reoccurrence of breakdown like additional stopper for
moulds.
Involved in many times moulds modification,Correction and ECI changes.
Corrected every breakdown within the target time.
Achieved Moulds and jigs upkeeping of 99.5%.
Cost reduction in consumbles,process reduction and productivity improvements.
Carried out many safety audits and improved safe working practices throughout the
company.
Eliminated many non value-added processes.
ORGANIZATION : Magnetic electronic device pvt ltd.Bommasandra Banglore.
DESIGNATION : Trainee Tool And Die maker.
DURATION : 9th Nov 2005 to 6th March 2006.
COMPANY PROFILE: MED-Magnetic electronic device. Manufacture of Progressive and fine
blanking component for electronics and automobile industries.The main customers are
Ford,IFB,pricol,apc,applicom and BPL.
RESPONIBILITIES:
Manufacture and maintenance of pressdie and jigs & fixture.
Attending trials of Progressive tools.
Preventive and breakdown maintenance of pressdie.
Designing for jig and fixture.
Spot welding.
Prepare inspection standards parts.
Maintaining History card for the presstools.
Trouble shooting in presstool and machine process.
Change over of presstools from the machine.
ACOMPLISHMENT:
Successful completion of model changes of various presstols for product development and up
gradation within time.
Successfully completed series of presstools for the launch of new product known as digital
satellite direct to home receiver for the world space organization.
Successfully completed series of presstools for a new product known as satellite surround
speakers.
Manufacture of new smaller presstools for the up gradation of existing product as per the
direction of the production engineering department.
4. ORGANIZATION : Master Moulds pvt ltd.Ambad.Nashik.
DESIGNATION : Trainee Toolmaker.
DURATION : 1 8th July 2004 to 7th July 2005.
COMPANY PROFILE: Master moulds Pvt Ltd .an iso 9001:2000 certifide company,The company is
based in india with more than a decade to establishment and promoters with more than two decade
of experience and expertise in Tool and Die Making,Injection Moulds,Compression Moulds,Transfer
Moulds,Thermoset Injection Moulds and Injection and compression moulded parts.The main
customers are Schneider electric,SIEMENS,L&T,GE,Lear corporation,Legrand,Pinnacle.
RESPONIBILITIES:
Design and Manufacturing injection moulds.
Manufacturing of moulds inserts and mould base.
Work instruction for conventional,CNC,WEDM and EDM machine.
Tool polishing.
Assembly& fitting new moulds.
Attending trials of moulds.
Work on all the conventional Toolroom machines like lathe,Vertical milling,Radial
Drilling,Surface grinding etc.
Work on cnc job setting, 2D programming.
Inspection of component and inspection report.
Preventive and Breakdown maintenance of injection moulds.
ACOMPLISHMENT:
Involved and Successful completion of 61 moulds for different product for different customers
within time.
Worked on VMC.
Education Qualiffication :
Diploma in Tool and Die making Passed out with Distinction (81.5%)Final 4th.
From the Board of Technical Education at GT & TC
(Government Tool room and training center.)Dandeli
Year of Passing
Aggregate Marks
Result
1st
Year /May-2002 63.87% Pass
2nd
year/ June-2003 73.99% Pass
3rd
year/July-2004 65.27% Pass
5. 4th
year / July-2005(Inplant
training) 81.5% Pass Distinction
Other skills :
Good inter personal skills
Good communication skills
Computer Knowledge :
DELCAM (power shape and power mill-2013).
Nx 7.5
Windows – windows8 windows xp. (MS Office).
Knowledge of Solid Modeling (Using Mechanical Desktop Software autocad.
Training Programs Attended :
Radiator and A/c assembly process. At Denso.
TPM, Maintenance planning, organizing and execution. At Denso.
Kaizen, Quality circles.
First aid Training..
Fire fighting
Laser welding
6. MY PERSONAL DETAILS:
Name : BRIJESH S ULVI
Father’s Name : Suraykant N Ulvi
Date of Birth & Age : 2nd october 1984, 30 years old.
Marital Status : Married.
Permanent Address : S/o Surayakant ulvi,
Brijesh Ulvi
Behind head post office,
Karwar(Uttar Karnataka),
Pin:581301.
Present Address : C/o MOHAN KUMAR A/L KOLIMDAPAN,
15 JLN 14/4,
TMN SERDANG UTAMA,
43300 SERI KEMBANGAN
SELANGOR, KUALA LUMPUR,Malaysia
Nationality – Religion : INDIAN – Hindu
Notice period : 1 month
Current ctc : 2500RM
Expected ctc : Negeotible
Hobbies : Reading Technical Books, Listening music
Languages Known (To Read) : English, Hindi Kannada, & Marathi.
7. (To write) : English, Hindi & kannada,
(To Speak) : English, Hindi,Kannada,Konkani & Marathi,
Passport details : Passport no J7072085,
Issue date 13/05/2011 valid to 12/05/2021.
DECLARATION:
I declare that the information provided above is true to the best of my knowledge. If proven
false, my candidature may be cancelled.
Hope I suit the requirements of your organization. So, consider my application favorably & provide
me an opportunity to serve your esteemed organization, for which I shall be ever grateful to you, Sir.
Eagerly awaiting your positive response.
Thanking you,
Yours faithfully,
Place: Serdang
Date:
[Brijesh Ulvi]