Boost PC performance: How more available memory can improve productivity
Ips10 Optical inspection for small bores, by Jenoptik
1. OPTICAL SYSTEMS LASERS & MATERIAL PROCESSING INDUSTRIAL METROLOGY TRAFFIC SOLUTIONS DEFENSE & CIVIL SYSTEMS
HOMMEL-ETAMIC IPS10
Bore inspection sensor system
Typical inspection applications
• Master & wheel brake cylinders
• Pump housings
• Con rods
• Fuel pump housings
• Pistons
Main features
• Automatic inspection of bores with 360° panoramic
Precision is our business.
view
• Detection of surface defects such as blow holes,
scratches, porosities, etc.
• Inspection of bores with diameters form 14 to 50 mm
• Bore depths up to 156 mm (optional max. 456 mm)
• Image pick-up in motion
• High inspection speed
• State of the art CMOS imaging technology
• Resolution: 2800 pixels over 360°
• Scanning speed up to 10,000 scans/second
2. Surface
defect
Image of
bore picked
up with
IPS10
Ring sensor array
IPS10 Workpiece
0°
360°
Functional principle
A 360° circular optics is advanced into the bore and generates an image of its inside surface. Circumferential lines in the bore
are represented as rings in the image. The image is continuously scanned by a high resolution CMOS imager. Simultaneous
forward advancing of the inspection sensor and circular scanning allows for the generation of an undistorted image of the
inner surface of the bore. Thanks to the high scanning rate, the IPS-10 can be advanced rapidly, which allows for short inspec-tion
Technical data IPS10
Inspection diameter 14 - 50 mm
Inspection length (bore depth) 156 mm / up to 456 mm (option)
Circumferential resolution 2800 pixels
Image sensor CMOS technology
Scanning speed max. 10,000 scans/second
Workpiece illumination integrated
System configuration
1. Bore inspection sensor IPS10
2. Light source
3. Framegrabber
4. Linear axis with motor controller
5. Industrial PC with software for automatic image
cycle times.
DB_IPS 10_EN 18.03.2009 Subject to change without notice.
JENOPTIK I Industrial Metrology
HOMMEL-ETAMIC GmbH I Alte Tuttlinger Straße 20 I 78056 VS-Schwenningen
Germany I Phone +49 7720 602-0 I Fax +49 7720 602-123
E-Mail: info.de@hommel-etamic.com I www.hommel-etamic.com
IPS10