2. Obelisk product series is a site-in-a-box solution
…a rooftop solution of mass production…
• standardizes the works needed for building a rooftop radio site
• lowers the cost of good, thus transfers significant savings to customer
• increases installation simplicity but most importantly reliability
• speeds up the whole roll-out process and thus improves time-to-revenue
3. Think out of the BOX and... BOX everything you can...
OPEX reduction is achieved by minimizing the related on-site
works (such as the installation of antennas & antenna near
products, RRUs, feeder cables…)
4. CAPEX reduction is achieved by massively producing a cost
efficient engineering design (such as the modular lattice
masts, the supporting poles & alignment antenna brackets…)
5. All of our rooftop systems are made from high quality
aluminum alloy 6063-T5, that is optionally anodized @ 20μm,
for long lasting reliability…
But most importantly... we also use fine material...
6. …engineered, tested & certified for the field…
Each and every delivered rooftop is
accompanied by a static study according to
the related Eurocodes and the special
national equivalent static requirements…
7. Each and every delivered rooftop is accompanied by
a pre-acceptance report that verifies the antenna
and antenna near product installation reliability…
…a trusted solution for worry free roll-out…
• no need to worry for cross-feeders
• no need to worry for the antenna’s azimuth & tilt alignment
• no need to worry for the antenna-feeder system PIM & VSWR
8. …all of our solutions are “folded” for making easy
the preventive & corrective maintenance…
10. We electrically set the antenna azimuth direction
locally and remotely according to AISG standard…
…while we can also embed antenna remote
controls!!!