SlideShare une entreprise Scribd logo

Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines

•
•
D
DirectHitNozzles

The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute. We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends. The DC43 cut through roots, grease, ice and blast through sand. You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat. Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now. You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.

Périphériques & matériel
1  sur  77
Télécharger pour lire hors ligne
DC43 Carriage Front 30° Front 24° Ring Cap Rings How to build your custom DC43 Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
Front 30° Front 24° Ring Cap Rings The DC43 back-to-back works in any of the 100mm pipe combinations shown below. © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® under 34 litres in 100mm lines DC43 back-to-back 30º 30º front 30º and back 30° DC43 Carriage L/S:31/03/14
Front 30° Front 24° Ring Cap Rings DC43 back-to-back (front and back reverse turbo nozzles) DC43 Carriage YES YES YES YES YES YES YES YES YES DC43 back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Adjust assembly to suit 100 & 150 lines Clean manholes, shafts, pits & hydro excavate NO NO NO YES YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose Cut tree roots FAST Penetrate tree roots FAST L/S:17/03/14
The DC43 carriage. Front 30° Front 24° Ring Cap Back 30° Rings Front view Side view Note: the DC43T carriage has a oring on each side Back view PCT/AU2012/000326 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage
Take your back nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Take your carriage Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Top view
Take the 30 degree front nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Take the 30 degree front nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º Screw and tighten up the front nozzle through the carriage into the back nozzle © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º Place assembly in the pipe © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43 traveling this way hits the blockage 90mm 24º tree root blockage cut & thrust Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage © Copyright Jim Paris 2013 150mm 100mm go back and forward 90mm 90mm 24º tree root blockage cut 24º How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings tree root blockage cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm 24º DC43 is through the blockage 90mm Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43 is cutting through the blockage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 is cutting through the blockage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 has cut the root blockage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Remove the ring cap Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the 30 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 30 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Place assembly in the pipe 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
30º Remove assembly from the pipe Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Remove ring from front nozzle and install it to the back nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
30º Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Remove front nozzle 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Screw in the ring cap trough the carriage into the back nozzle with your ring spanner 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Place assembly in the pipe 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º Turn the water off 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Remove ring from back nozzle 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º Remove Ring Cap 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the 24 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
24º Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 24 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º Place assembly in the pipe 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Rings 24º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
DIRECT HIT® © Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com

Recommandé

C43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetratorC43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetratorDirectHitNozzles
 
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle AssemblyExtreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle AssemblyDirectHitNozzles
 
Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs) Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs) DirectHitNozzles
 
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsSpeciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsDirectHitNozzles
 
Drect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It WorksDrect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It WorksDirectHitNozzles
 
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
 
Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly DirectHitNozzles
 
C43t Sewer Nozzle Assembly
C43t Sewer Nozzle AssemblyC43t Sewer Nozzle Assembly
C43t Sewer Nozzle AssemblyDirectHitNozzles
 

Recommandé

C43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetratorC43rs the all purpose (short) penetrator
C43rs the all purpose (short) penetratorDirectHitNozzles
 
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle AssemblyExtreme Long Penetrator (C38r) Sewer Nozzle Assembly
Extreme Long Penetrator (C38r) Sewer Nozzle AssemblyDirectHitNozzles
 
Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs) Direct Hit Extreme (Short) Penetrator (C38rs)
Direct Hit Extreme (Short) Penetrator (C38rs) DirectHitNozzles
 
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsSpeciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsDirectHitNozzles
 
Drect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It WorksDrect Hit DC43 Sewer Nozzle Assembly - How It Works
Drect Hit DC43 Sewer Nozzle Assembly - How It WorksDirectHitNozzles
 
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
 
Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly Direct Hit DC38 Sewer Nozzle Assembly
Direct Hit DC38 Sewer Nozzle Assembly DirectHitNozzles
 
C43t Sewer Nozzle Assembly
C43t Sewer Nozzle AssemblyC43t Sewer Nozzle Assembly
C43t Sewer Nozzle AssemblyDirectHitNozzles
 
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It WorksDirect Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It WorksDirectHitNozzles
 
ключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыmashresurs
 
Massey ferguson Mf 7274 7278 parts catalog
Massey ferguson Mf 7274 7278 parts catalog Massey ferguson Mf 7274 7278 parts catalog
Massey ferguson Mf 7274 7278 parts catalog PartCatalogs Net
 
электроника и микромеханика
электроника и микромеханикаэлектроника и микромеханика
электроника и микромеханикаmashresurs
 
Massey ferguson MF 7250, 7252 parts catalog
Massey ferguson MF 7250, 7252 parts catalog Massey ferguson MF 7250, 7252 parts catalog
Massey ferguson MF 7250, 7252 parts catalog PartCatalogs Net
 
Massey ferguson mf 30 combines ( 53050) parts catalogue manual
Massey ferguson mf 30 combines ( 53050) parts catalogue manualMassey ferguson mf 30 combines ( 53050) parts catalogue manual
Massey ferguson mf 30 combines ( 53050) parts catalogue manualfhhjsjekmdme
 
отвертки, г образные ключи и насадки
отвертки, г образные ключи и насадкиотвертки, г образные ключи и насадки
отвертки, г образные ключи и насадкиmashresurs
 
пневмомеханика
пневмомеханикапневмомеханика
пневмомеханикаmashresurs
 
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015IBS MRO
 
молотки, стамески
молотки, стамескимолотки, стамески
молотки, стамескиmashresurs
 
Massey ferguson MF 7242 Combine - 1637439 parts catalog
Massey ferguson MF 7242 Combine - 1637439 parts catalog Massey ferguson MF 7242 Combine - 1637439 parts catalog
Massey ferguson MF 7242 Combine - 1637439 parts catalog PartCatalogs Net
 
OzLinc Industries High Pressure Fittings Catalogue
OzLinc Industries High Pressure Fittings CatalogueOzLinc Industries High Pressure Fittings Catalogue
OzLinc Industries High Pressure Fittings Catalogueozlincau
 
Massey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualMassey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualhhfjksekmm
 
Massey ferguson mf 27 combine parts catalogue manual
Massey ferguson mf 27 combine parts catalogue manualMassey ferguson mf 27 combine parts catalogue manual
Massey ferguson mf 27 combine parts catalogue manualhhjsekmdmm
 
C43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyC43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyDirectHitNozzles
 
C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34DirectHitNozzles
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualjjfksekdmejik
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualifkkdkmdmd
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualifkkdkmdmd
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualjjfksekdmejik
 
Massey ferguson mf 7254 combine parts catalogue manual
Massey ferguson mf 7254 combine parts catalogue manualMassey ferguson mf 7254 combine parts catalogue manual
Massey ferguson mf 7254 combine parts catalogue manualjjfksekdmejik
 
18. New C43rs How it works.pdf
18. New C43rs How it works.pdf18. New C43rs How it works.pdf
18. New C43rs How it works.pdfDirectHitNozzles
 

Contenu connexe

Tendances

Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It WorksDirect Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It WorksDirectHitNozzles
 
ключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыmashresurs
 
Massey ferguson Mf 7274 7278 parts catalog
Massey ferguson Mf 7274 7278 parts catalog Massey ferguson Mf 7274 7278 parts catalog
Massey ferguson Mf 7274 7278 parts catalog PartCatalogs Net
 
электроника и микромеханика
электроника и микромеханикаэлектроника и микромеханика
электроника и микромеханикаmashresurs
 
Massey ferguson MF 7250, 7252 parts catalog
Massey ferguson MF 7250, 7252 parts catalog Massey ferguson MF 7250, 7252 parts catalog
Massey ferguson MF 7250, 7252 parts catalog PartCatalogs Net
 
Massey ferguson mf 30 combines ( 53050) parts catalogue manual
Massey ferguson mf 30 combines ( 53050) parts catalogue manualMassey ferguson mf 30 combines ( 53050) parts catalogue manual
Massey ferguson mf 30 combines ( 53050) parts catalogue manualfhhjsjekmdme
 
отвертки, г образные ключи и насадки
отвертки, г образные ключи и насадкиотвертки, г образные ключи и насадки
отвертки, г образные ключи и насадкиmashresurs
 
пневмомеханика
пневмомеханикапневмомеханика
пневмомеханикаmashresurs
 
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015IBS MRO
 
молотки, стамески
молотки, стамескимолотки, стамески
молотки, стамескиmashresurs
 
Massey ferguson MF 7242 Combine - 1637439 parts catalog
Massey ferguson MF 7242 Combine - 1637439 parts catalog Massey ferguson MF 7242 Combine - 1637439 parts catalog
Massey ferguson MF 7242 Combine - 1637439 parts catalog PartCatalogs Net
 
OzLinc Industries High Pressure Fittings Catalogue
OzLinc Industries High Pressure Fittings CatalogueOzLinc Industries High Pressure Fittings Catalogue
OzLinc Industries High Pressure Fittings Catalogueozlincau
 
Massey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualMassey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualhhfjksekmm
 
Massey ferguson mf 27 combine parts catalogue manual
Massey ferguson mf 27 combine parts catalogue manualMassey ferguson mf 27 combine parts catalogue manual
Massey ferguson mf 27 combine parts catalogue manualhhjsekmdmm
 

Tendances (14)

Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It WorksDirect Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
 
ключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторыключи динамометрические и мультипликаторы
ключи динамометрические и мультипликаторы
 
Massey ferguson Mf 7274 7278 parts catalog
Massey ferguson Mf 7274 7278 parts catalog Massey ferguson Mf 7274 7278 parts catalog
Massey ferguson Mf 7274 7278 parts catalog
 
электроника и микромеханика
электроника и микромеханикаэлектроника и микромеханика
электроника и микромеханика
 
Massey ferguson MF 7250, 7252 parts catalog
Massey ferguson MF 7250, 7252 parts catalog Massey ferguson MF 7250, 7252 parts catalog
Massey ferguson MF 7250, 7252 parts catalog
 
Massey ferguson mf 30 combines ( 53050) parts catalogue manual
Massey ferguson mf 30 combines ( 53050) parts catalogue manualMassey ferguson mf 30 combines ( 53050) parts catalogue manual
Massey ferguson mf 30 combines ( 53050) parts catalogue manual
 
отвертки, г образные ключи и насадки
отвертки, г образные ключи и насадкиотвертки, г образные ключи и насадки
отвертки, г образные ключи и насадки
 
пневмомеханика
пневмомеханикапневмомеханика
пневмомеханика
 
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
 
молотки, стамески
молотки, стамескимолотки, стамески
молотки, стамески
 
Massey ferguson MF 7242 Combine - 1637439 parts catalog
Massey ferguson MF 7242 Combine - 1637439 parts catalog Massey ferguson MF 7242 Combine - 1637439 parts catalog
Massey ferguson MF 7242 Combine - 1637439 parts catalog
 
OzLinc Industries High Pressure Fittings Catalogue
OzLinc Industries High Pressure Fittings CatalogueOzLinc Industries High Pressure Fittings Catalogue
OzLinc Industries High Pressure Fittings Catalogue
 
Massey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manualMassey ferguson mf 7272 cerea combines parts catalogue manual
Massey ferguson mf 7272 cerea combines parts catalogue manual
 
Massey ferguson mf 27 combine parts catalogue manual
Massey ferguson mf 27 combine parts catalogue manualMassey ferguson mf 27 combine parts catalogue manual
Massey ferguson mf 27 combine parts catalogue manual
 

Similaire à Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines

C43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyC43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyDirectHitNozzles
 
C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34DirectHitNozzles
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualjjfksekdmejik
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualifkkdkmdmd
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualifkkdkmdmd
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualjjfksekdmejik
 
Massey ferguson mf 7254 combine parts catalogue manual
Massey ferguson mf 7254 combine parts catalogue manualMassey ferguson mf 7254 combine parts catalogue manual
Massey ferguson mf 7254 combine parts catalogue manualjjfksekdmejik
 

Similaire à Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines (7)

C43r Sewer Nozzle Assembly
C43r Sewer Nozzle AssemblyC43r Sewer Nozzle Assembly
C43r Sewer Nozzle Assembly
 
C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34C38r Nozzle Assembly for over 34
C38r Nozzle Assembly for over 34
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
 
Massey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manualMassey ferguson mf 7252 combine parts catalogue manual
Massey ferguson mf 7252 combine parts catalogue manual
 
Massey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manualMassey ferguson mf 7250 combine parts catalogue manual
Massey ferguson mf 7250 combine parts catalogue manual
 
Massey ferguson mf 7254 combine parts catalogue manual
Massey ferguson mf 7254 combine parts catalogue manualMassey ferguson mf 7254 combine parts catalogue manual
Massey ferguson mf 7254 combine parts catalogue manual
 

Plus de DirectHitNozzles

18. New C43rs How it works.pdf
18. New C43rs How it works.pdf18. New C43rs How it works.pdf
18. New C43rs How it works.pdfDirectHitNozzles
 
17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdfDirectHitNozzles
 
C43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add OnsC43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add OnsDirectHitNozzles
 
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minuteC43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minuteDirectHitNozzles
 
C38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minuteC38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minuteDirectHitNozzles
 
C43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle KitC43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle KitDirectHitNozzles
 
C43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle AssemblyC43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle AssemblyDirectHitNozzles
 
C43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle AssemblyC43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle AssemblyDirectHitNozzles
 
C38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting AssemblyC38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting AssemblyDirectHitNozzles
 

Plus de DirectHitNozzles (12)

18. New C43rs How it works.pdf
18. New C43rs How it works.pdf18. New C43rs How it works.pdf
18. New C43rs How it works.pdf
 
17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf17. C38rs with 3 x side jet Carriage and How it works.pdf
17. C38rs with 3 x side jet Carriage and How it works.pdf
 
C38rs How it works.pdf
C38rs How it works.pdfC38rs How it works.pdf
C38rs How it works.pdf
 
The C38rs: How it works
The C38rs: How it worksThe C38rs: How it works
The C38rs: How it works
 
C43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add OnsC43T Cap Starter Kit Add Ons
C43T Cap Starter Kit Add Ons
 
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minuteC43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
 
C38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minuteC38 Cap Starter Kit For Pumps Under 21 litres per minute
C38 Cap Starter Kit For Pumps Under 21 litres per minute
 
C43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle KitC43 Cap To Back Sewer Nozzle Kit
C43 Cap To Back Sewer Nozzle Kit
 
C43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle AssemblyC43 Cap to Back Nozzle Assembly
C43 Cap to Back Nozzle Assembly
 
C43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle AssemblyC43 Back To Back Nozzle Assembly
C43 Back To Back Nozzle Assembly
 
C38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting AssemblyC38 Cap To Back Root Cutting Assembly
C38 Cap To Back Root Cutting Assembly
 
C38 Sewer Nozzle Assembly
C38 Sewer Nozzle AssemblyC38 Sewer Nozzle Assembly
C38 Sewer Nozzle Assembly
 

Dernier

怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证
怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证
怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证tufbav
 
Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...
Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...
Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...nirzagarg
 
一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证
一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证
一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证wpkuukw
 
在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信
在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信
在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信oopacde
 
一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样
一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样
一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样ayoqf
 
Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...
Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...
Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...drmarathore
 
Vashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call Girl
Vashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call GirlVashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call Girl
Vashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call GirlPriya Reddy
 
Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...
Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...
Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...vershagrag
 
在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一
在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一
在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一uodye
 
LANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURE
LANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURELANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURE
LANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHUREF2081syahirahliyana
 
怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证
怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证
怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证ehyxf
 
Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...
Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...
Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...Sareena Khatun
 
一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理
一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理
一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理uodye
 
一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制
一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制
一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制uodye
 
CRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptx
CRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptxCRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptx
CRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptxRishabh332761
 
怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证
怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证
怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证tufbav
 

Dernier (20)

怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证
怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证
怎样办理斯威本科技大学毕业证（SUT毕业证书）成绩单留信认证
 
In Riyadh Saudi Arabia |+966572737505 | Buy Cytotec| Get Abortion pills
In Riyadh Saudi Arabia |+966572737505 | Buy Cytotec| Get Abortion pillsIn Riyadh Saudi Arabia |+966572737505 | Buy Cytotec| Get Abortion pills
In Riyadh Saudi Arabia |+966572737505 | Buy Cytotec| Get Abortion pills
 
Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...
Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...
Top profile Call Girls In Ratlam [ 7014168258 ] Call Me For Genuine Models We...
 
一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证
一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证
一比一定(购)新西兰林肯大学毕业证(Lincoln毕业证)成绩单学位证
 
在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信
在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信
在线办理(scu毕业证）南十字星大学毕业证电子版学位证书注册证明信
 
Abortion pills in Jeddah |+966572737505 | Get Cytotec
Abortion pills in Jeddah |+966572737505 | Get CytotecAbortion pills in Jeddah |+966572737505 | Get Cytotec
Abortion pills in Jeddah |+966572737505 | Get Cytotec
 
一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样
一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样
一比一原版(CSUEB毕业证书)东湾分校毕业证原件一模一样
 
Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...
Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...
Abort pregnancy in research centre+966_505195917 abortion pills in Kuwait cyt...
 
Critical Commentary Social Work Ethics.pptx
Critical Commentary Social Work Ethics.pptxCritical Commentary Social Work Ethics.pptx
Critical Commentary Social Work Ethics.pptx
 
Vashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call Girl
Vashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call GirlVashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call Girl
Vashi Affordable Call Girls ,07506202331,Vasai Virar Charming Call Girl
 
Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...
Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...
Low Cost Patna Call Girls Service Just Call 🍑👄6378878445 🍑👄 Top Class Call Gi...
 
在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一
在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一
在线制作(UQ毕业证书)昆士兰大学毕业证成绩单原版一比一
 
LANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURE
LANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURELANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURE
LANDSLIDE MONITORING AND ALERT SYSTEM FINAL YEAR PROJECT BROCHURE
 
怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证
怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证
怎样办理阿德莱德大学毕业证（Adelaide毕业证书）成绩单留信认证
 
Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...
Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...
Call Girls Amethi 9332606886 HOT & SEXY Models beautiful and charming call g...
 
一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理
一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理
一比一维多利亚大学毕业证(victoria毕业证)成绩单学位证如何办理
 
Buy Abortion pills in Riyadh |+966572737505 | Get Cytotec
Buy Abortion pills in Riyadh |+966572737505 | Get CytotecBuy Abortion pills in Riyadh |+966572737505 | Get Cytotec
Buy Abortion pills in Riyadh |+966572737505 | Get Cytotec
 
一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制
一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制
一比一原版(Otago毕业证书)奥塔哥理工学院毕业证成绩单学位证靠谱定制
 
CRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptx
CRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptxCRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptx
CRISIS COMMUNICATION presentation=-Rishabh(11195)-group ppt (4).pptx
 
怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证
怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证
怎样办理维多利亚大学毕业证（UVic毕业证书）成绩单留信认证
 

Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines

  • 1. DC43 Carriage Front 30° Front 24° Ring Cap Rings How to build your custom DC43 Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
  • 2. Front 30° Front 24° Ring Cap Rings The DC43 back-to-back works in any of the 100mm pipe combinations shown below. © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® under 34 litres in 100mm lines DC43 back-to-back 30º 30º front 30º and back 30° DC43 Carriage L/S:31/03/14
  • 3. Front 30° Front 24° Ring Cap Rings DC43 back-to-back (front and back reverse turbo nozzles) DC43 Carriage YES YES YES YES YES YES YES YES YES DC43 back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Adjust assembly to suit 100 & 150 lines Clean manholes, shafts, pits & hydro excavate NO NO NO YES YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose Cut tree roots FAST Penetrate tree roots FAST L/S:17/03/14
  • 4. The DC43 carriage. Front 30° Front 24° Ring Cap Back 30° Rings Front view Side view Note: the DC43T carriage has a oring on each side Back view PCT/AU2012/000326 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage
  • 5. Take your back nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 6. Take your carriage Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 7. Front 30° Front 24° Ring Cap Back 30° Rings PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 8. Take the 30 degree front nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 9. Take the 30 degree front nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 10. 30º Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º Screw and tighten up the front nozzle through the carriage into the back nozzle © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 11. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º Place assembly in the pipe © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 12. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 13. Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 14. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43 traveling this way hits the blockage 90mm 24º tree root blockage cut & thrust Side view
  • 15. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage © Copyright Jim Paris 2013 150mm 100mm go back and forward 90mm 90mm 24º tree root blockage cut 24º How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
  • 16. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings tree root blockage cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm 24º DC43 is through the blockage 90mm Side view
  • 17. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43 is cutting through the blockage Side view
  • 18. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 is cutting through the blockage Side view
  • 19. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 has cut the root blockage Side view
  • 20. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 21. Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 22. Front 30° Front 24° Ring Cap Back 30° Rings Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 23. Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 24. Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 25. Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 26. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 27. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 28. Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 29. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 30. Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 31. Remove the ring cap Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 32. Front 30° Front 24° Ring Cap Back 30° Rings Take the 30 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 33. Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 30 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 34. Front 30° Front 24° Ring Cap Back 30° Rings 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 35. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 36. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 37. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 38. Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 39. Front 30° Front 24° Ring Cap Back 30° Rings 30º Place assembly in the pipe 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 40. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 41. Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 42. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 43. 30º Remove assembly from the pipe Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 44. Remove ring from front nozzle and install it to the back nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 45. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 46. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 47. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 48. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 49. 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 50. Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 51. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 52. Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 53. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 54. 30º Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 55. Front 30° Front 24° Ring Cap Back 30° Rings Remove front nozzle 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 56. Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 57. Front 30° Front 24° Ring Cap Back 30° Rings Screw in the ring cap trough the carriage into the back nozzle with your ring spanner 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 58. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Place assembly in the pipe 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 59. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 60. Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 61. Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 62. Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º Turn the water off 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 63. Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 64. Front 30° Front 24° Ring Cap Back 30° Rings Remove ring from back nozzle 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 65. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 66. Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 67. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º Remove Ring Cap 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 68. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 69. Front 30° Front 24° Ring Cap Back 30° Rings Take the 24 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 70. 24º Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 24 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 71. Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 72. Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º Place assembly in the pipe 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 73. Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 74. Front 30° Front 24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 75. Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 76. Front 30° Front 24° Ring Cap Rings 24º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 77. DIRECT HIT® © Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com