1. Name: Domiciano L. Bejer
Mobile No.: +974 55807837
Home Landline No.: +974 44425767
Email: jomes255@gmail.com
Address in Qatar: Al Nazr, Doha Qatar
Address in Philippines: Brgy. Balete, Batangas City
Age/Sex/Nationality: 39 / Male / Filipino
Height/Weight: 5’ 4” (162cm.) / 145 lbs. (66kg.)
Civil Status: Married with two children
CAREER OBJECTIVE
 To further develop a professional career in Power Plant Operation and contribute significantly in
achieving corporate goals of the company that offers opportunity to work and provides avenue to
apply knowledge, talents and ideas showing my integrity, honesty, commitment and excellence
and participating in activities that promote continuous success.
PROFESSIONAL SUMMARY
 More than seven (7) years as Shift Charge Engineer in Qatar Power Company
 One (1) year as Control Room Engineer in Qatar Power Company
 Assistant Manager in KEPCO Ilijan Corporation Production Department
 Almost six (6) years as Shift Charge Engineer in KEPCO Ilijan Corp. 1200MW CCGT Plant
 Three (3) years as Process Specialist in Stephan Philippines, Inc. Surfactant Chemical Plant
 Process Engineer in EEI Corporation Fabrication Yard
 Graduate of Master in Business Management (Major in Business Management)
 Bachelor Degree in Mechanical Engineering
 Licensed Mechanical Engineer (Philippine Professional Regulation Commission)
OTHER KEY TECHNICAL SKILLS
 Predictive Maintenance and Condition Monitoring, University of the Philippines 2003
 Programmable Logic Control Course, University of the Philippines 1999
 AutoCAD, Windows and Microsoft Office, ABCC Philippines, Inc. 1997
 Primavera Project Planner
 Knowledgeable in CMMS-Maximo
 Knowledgeable in Nisoft Eclipse II PTW System
 Knowledgeable in Internal Audit-TUV Certificate
 Hands-on training on Sr. Operations Engineer position for more than four months
EMPLOYMENT DETAILS
 Shift Charge Engineer, Qatar Power Q.S.C (April 1, 2007– present)
Company Description
A joint stock company established on 5th
Jan 2005 to build, operate and maintain a 1025MW Power
and 60MIGD Water Plant in Ras Laffan Industrial City, Qatar. The objective of the company is to
provide water and electricity to the State of Qatar for a period of 25 years from its commercial
operation in 2006 in a safe, environmentally clean, efficient and reliable manner. The company
employs three (3) units Siemens 237MW V94.3A(4) Gas Turbines, three (3) units Ansaldo Heat
Recovery Steam Generators, two (2) units Siemens 221MW M30-40-M2A (M20) Back Pressure
Steam Turbines and four (4) units Doosan’s 15MIGD Multi-Stage Flash Distillers.
CV-Domiciano L. Bejer Page 1 of 6

2. Job Responsibilities:
 Responsible for leading the Operations Shift Team to ensure the plant meets the required
availability, reliability, efficiency, generation and cost targets, safely and within strict
environmental limits. This includes responsibility for making accurate and timely decisions on
matters affecting plant processes and performance and consulting with the Production Manager
when necessary.
 Provides focused leadership to the shift team to achieve plant performance and ensure optimum
level of power and water export as required by the off taker.
 Ensures shifts are well manned and required resources are available for the team to operate the
plant safely, reliably and efficiently.
 Understand plant status at shift takeover and exchanges important details to the shift team.
 Coordination among the operations and maintenance teams for routine and corrective
maintenance requirements.
 Ensures effective implementation of safety rules on a shift by shift basis.
 Ensures and oversees routine testing activities.
 Oversees and monitors plant start-ups and shutdown as required.
 Continuous monitoring and analysis of equipment operating parameters for early prediction of
abnormal condition and initiate appropriate action to prevent unscheduled unit or equipment
outage.
 Oversees chemical processes, sampling and water plant control for quality standards and
environmental and safety compliance.
 Establish and facilitate training programs for individual development and operational competence.
 Coordinate and liaise with Kahramaa, Qatar Petroleum and Common Seawater Facility for the
operational and quality issues.
 Prepares reviews and ensure that relevant procedures and instructions are being followed so that
work is carried out in a controlled and consistent manner.
 Plays the role of Incident Commander in emergency circumstances.
 Communication and cooperation with the Maintenance and Operation, Finance and Accounting,
HR/Administration and HSE Team.
 Control Room Engineer, Qatar Power Q.S.C (January 29, 2006– March 31, 2007)
Job Responsibilities:
 Responsible for plant operations from the control room to ensure the plant meets the required
availability, reliability, efficiency, generations and cost targets, safely and within strict
environmental limits. This includes regular equipment start-ups, shutdowns, changeovers and
regular operation/monitoring, as well as responding to alarms and emergency conditions.
 Ensures optimum performance of the plant at all times and maintains the level of power and water
export as required by off taker control centers.
 Performs periodic plant test activities to ensure reliability of trip devices and standby plant
equipment.
 Performs safe plant start-up and shutdown activities to maintain optimum reliability of power and
water plant equipment.
 Monitors and analyses performance parameters of the plant for change and performs corrective
actions necessary to keep the plant in a safe and efficient running condition.
 Planning and controlled changeover/shutdown of plant equipment for maintenance purposes.
 Directs and guides field operators to operate plant equipment in the field and conduct routine
plant test/changeover/maintenance activities.
 Prepares the following reports: Shift Reports, Shift Production Control Room Log, Other reports
related to equipment operation
 Play the role of Incident Commander in case of emergency in the absence of Shift Charge Engineer.
CV-Domiciano L. Bejer Page 2 of 6

3.  Adhere, prepare and revise location procedures and work instructions based on accepted
standards for efficient, safe and reliable operations.
 Coordinates with the SCE and maintenance staff for planned and unplanned maintenance
activities.
 Coordinates with Kahramaa Control Center for power and water export, gas supplier and sea
water supplier.
 Assistant Manager, KEPCO Ilijan Corporation (January 2006 )
Company Description
This company built, operates and maintains a 1200MW Combined Cycle Gas Turbine Power Plant
located in Ilijan, Batangas City, Philippines. The plant is composed of two (2) power blocks of
600MW each. Each block comprises of two (2) Mitsubishi Oil-Gas fired 230MW M501G Gas
Turbine Generators, exhausting to two (2) Hitachi HRSGs. The combined cycle is supplying steam
to Mitsubishi 250MW Condensing Steam Turbine at 150bar/540o
C.
Job Responsibilities:
 Supports the Plant Reliability Manager in overseeing the Operation Department
 Provides necessary inputs and supports in the preparation of budget for the department and track
variances.
 Suggests and implements system modifications for more efficient, safe and reliable operation.
 Assist in the preparation of monthly department report.
 Carry out other operation-related tasks which may be delegated by the Plant Reliability Manager.
 Shift Charge Engineer, KEPCO Ilijan Corporation, (March 1, 2000 - December 31, 2005)
Job Responsibilities:
 Responsible for the safe and reliable operation of the power station on a shifting basis and will be
supervising the work of Control Room Operators, Switchboard Operator, Gas Turbine Operators
and Steam Turbine Operator.
 Responsible to the Plant Reliability Manager for the coordination and execution of all operation-
related activities of the power station during the shift.
 Evaluates equipment troubles occurring under his shift and identify operation constraints /
limitations to ensure units availability and reliability.
 Involves in troubleshooting activities on all operation-related matters of the power station to
determine the root cause of the problem and execute the most appropriate countermeasure in
accordance with his superiors.
 Directly in-charge of all operational activities of the power station provides instructions and
necessary details to Plant Operators for the specific task required.
 Resolves operation-related troubles of the power station especially during transient conditions or
emergency situations and implements precautionary measures during critical on-line maintenance
works.
 Oversee the execution of lock-out / tag-out for maintenance works to ensure safety of personnel
and equipment.
 Preparation, evaluation, implementation and revision (if necessary) of SOP’s based on vendor
requirements and accepted standards for efficient, safe, and reliable operation.
 Coordinates with the grid dispatch center and gas receiving facility personnel regarding the power
station load and fuel requirement.
 Prepare necessary reports and make correspondence relative to the work.
 Responsible for the continuous education and training of personnel in his group.
Awards Received:
 Best Employee Award, December 2004
 Hall of Fame Awardee for Superior Performance as Shift Charge Engineer, September 2004
 Plant Safety Award, September 2004
CV-Domiciano L. Bejer Page 3 of 6

4.  Recognition on Contribution to Plant System Modification, September 2004
 Process Specialist, Stephan Philippines, Inc. , (January 7, 1997 – February 29, 2000)
Company Description
This company operates and maintains the Surfactant and Specialty Chemical Plant located in
Cocochem Agro-Industrial Park, Bauan, Batangas, Philippines.
Job Responsibilities:
 Operates Air/SO3 Plant, Sulfonation/Sulfation Plant, Batching Plant and Dryer Plant.
 Operates plant utilities for plant and instrument air, water and air chiller, hot water, cooling water
and soft water.
 Monitors chemical and mechanical processes by taking the parameters and make the necessary
adjustment according to applicable System Procedures and Work Instructions.
 Prepares production batchlist reports and related documents.
 Initiates plant start-up/shutdown according to established Work Instructions (WI).
 Recommends system improvement and participates on process developmental study.
 Reports equipment abnormalities, applies quick fix, analyzes root causes and determines the most
appropriate corrective/preventive action(s) using the Quality Improvement Tools.
 Takes samples and performs in-process material (intermediates and finished) testing and
compares results to criteria specified in the Quality Plan (QP).
 Guides/Assists maintenance crew in their repair works on the system.
 Coordinates with logistics personnel in matters regarding raw materials and assists them in
sorting finished product.
 Takes part in commissioning new equipment/facilities.
 Assists in doing Experimental Production Run (EPR) in determining plant capability to run new
product.
 Acquaints production temporaries/contractors for their work load.
 Prepares procedures and work instructions.
Important Accomplishments:
 Established several system procedures; manufacturing, logistics, current good manufacturing
practices work instructions in compliance to the requirements of ISO 9002:1994. Thus, received
award for exemplary participation and contribution in work group and ISO 9000 activities.
 Assigned as Internal Quality Auditor after passing the oral and written examinations given by TUV
Rheinland Philippines, Inc. and had conducted several audit activities at the plant.
 Process Engineer, EEI Corporation, (November 1996 – May 1997)
Company Description
Construction and Fabrication Yard located in Sta. Maria, Bauan, Batangas, Philippines
Job Responsibilities:
 Prepares project documentation on fabrication travelers, Addenda, shop operational procedures
and instructions.
 Coordinates with Production Planning Group for production batchlist releases.
 Technical code and standard study.
 Shop equipment and tooling capacity study.
 Responsible in detailing the project highlights, process workflow needed for project de-
briefing/pre-fabrication meeting.
 Updates traveler blocks on change notices and latest drawing revision number and change notice
block on affected approved for fabrication drawing.
CV-Domiciano L. Bejer Page 4 of 6

5.  Recommends to the immediate superior work simplification scheme of the project.
 Reviews/Checks technical sketches/cutting lists prepared by Draftsman.
 Initiate drawing review detailing, clarifies drawing vague areas and documents finding via change
notice control.
 Undertakes detail shop process developmental study.
 Follows/Abides in the company rules and regulations.
 Prepares periodic accomplishment reports.
EDUCATIONAL QUALIFICATIONS
 Post Graduate: Master in Business Management, University of Batangas, March 2005
 College: Bachelor of Science in Mechanical Engineering, Batangas State University, April 1996
TRAININGS ATTENTED
 Interpersonal Communication Skills, EuroMaTech, November 2-6, 2014
 Radiation Protection Supervisor Training Course, Ionactive Co.
United Kingdom
September 1-2, 2010
 Siemens MMI Operation Training
Siemens Energy Sector-Fossil Power Generation
Erlangen, Germany
September 29 – October 2, 2008
 ISO 18001:2007 Awareness Training, TUV Middle East, November 26, 2007
 ISO 14001:2004 Awareness Training, TUV Middle East, November 27, 2007
 ISO 14001:2004 EMS Internal Auditor Training, TUV Middle East, November 29, 2007
 OHSAS 18001:2007 Internal Auditor Training, TUV Middle East, November 28-29, 2007
 Managing Safely, IOSH, October 29, 2008
 Performance Management Course, Vital Impact, September 2008
 From Engineer to Manager, VMAC Business Group, September 20-21, 2011
 Heat Recovery Steam Generator (HRSG) Operation and Maintenance
Bobcock-Hitachi, Inc.
Kure, Japan
July 21 to August 8, 2000
 MHI 501G Gas Turbine & Steam Turbine Operation and Maintenance
Mitsubishi Heavy Industries Inc.
Takasago City, Japan
June 15, 2000 to July 20, 2000
 On-the-Job Training of Power Generation Basics
Ulsan Combined Cycle Power Plant
Ulsan City, South Korea
May 20, 2000 to June 5, 2000
 Basics of Power Generation, Auxiliary Equipment & Controls
Korea Electric Power Corporation (KEPCO)
Conventional Power Generation Training Center
Seoul City, South Korea
March 5, 2000 to May 19, 2000
 People Handling Skills
 Chemical Safety Handling Course
 Gas Turbine Combustion Pressure Fluctuation Monitoring System
 Primavera Project Planner
 BHK Site Training for HRSG
 Hitachi Site Training for STG & GTG
 Oil Spill Response Training
CV-Domiciano L. Bejer Page 5 of 6

6.  MHI Site Training for GT/ ST Operations Diasys-Up V & Maintenance
 Distributed Control System (DCS) Training
 Water Treatment Training
 Electrochlorinarion System Training
 Continuous Emission Monitoring System Training
 Balance of Plant Training
 New Technologies for Plant Maintenance
 Side Entry Tank Mixers, Snap-On Tools, Packings and Gaskets
 Innovations in EHS Management and Proposed Philippine Clean Air Act
 First Aid and Basic Life Support Training
 A Continuing Challenge: System and Process In Piping, Filtration And Automation Seminar
 Welding Technology
 Stainless Steel Metallurgy and Applications
 Stepan Quality Education
 Internet for Mechanical Engineers
 Internal/External Auditing Course
 Statistical Process Control
 Transmation
 Self-Contained Breathing Apparatus (SCBA)
 Introduction to the Technology of Sulfation/Sulfonation
 Instrumentation
 Power Plant Operation and Proper Waste Disposal
 ISO 9000
I hereby certify that the above information is true & correct to the best of my knowledge and belief.
Domiciano L. Bejer
CV-Domiciano L. Bejer Page 6 of 6

7.  MHI Site Training for GT/ ST Operations Diasys-Up V & Maintenance
 Distributed Control System (DCS) Training
 Water Treatment Training
 Electrochlorinarion System Training
 Continuous Emission Monitoring System Training
 Balance of Plant Training
 New Technologies for Plant Maintenance
 Side Entry Tank Mixers, Snap-On Tools, Packings and Gaskets
 Innovations in EHS Management and Proposed Philippine Clean Air Act
 First Aid and Basic Life Support Training
 A Continuing Challenge: System and Process In Piping, Filtration And Automation Seminar
 Welding Technology
 Stainless Steel Metallurgy and Applications
 Stepan Quality Education
 Internet for Mechanical Engineers
 Internal/External Auditing Course
 Statistical Process Control
 Transmation
 Self-Contained Breathing Apparatus (SCBA)
 Introduction to the Technology of Sulfation/Sulfonation
 Instrumentation
 Power Plant Operation and Proper Waste Disposal
 ISO 9000
I hereby certify that the above information is true & correct to the best of my knowledge and belief.
Domiciano L. Bejer
CV-Domiciano L. Bejer Page 6 of 6