3. Product line: Face Master 1.5
APPLICATION
Face Master 1.5 - The mechanized drill rig for ultra
low seams is designed for drilling blastholes of
diameters between 41 mm and 76 mm and of net
length 3.2 m. The unit can be used in methane-free
mineral underground workings. Design allows
effective drilling of blastholes in underground
workings of height up to 1.5m
Coverage: 30 m2
TECHNICAL DATA:
Height of the rig in tramming position 1250 mm
Width of the rig 2200 mm
Length of the rig 12100 mm
Outer turn radius 7200 mm
Inner turn radius 3100 mm
Weight of the rig 16900 kg
Travel speed
I gear (forward and rear) 0-4
km/h
II gear (forward and rear) up to 6 km/h
Max. incline angle of travel 12°
4. Product line: Face Master 2.0
APPLICATION
Face Master 2.0 - The mechanized drill rig for low
seams is designed for drilling blastholes of
diameters between 41 mm and 76 mm and of net
length 3.2 m. The unit can be used in methane-free
mineral workings. Design allows effective drilling
of blastholes in workings of height up to 2.0 m.
Coverage: 35 m2
TECHNICAL DATA:
Height of the rig in tramming position 1700 mm
Width of the rig 2200 mm
Length of the rig 12000 mm
Outer turn radius 5900 mm
Inner turn radius 3600 mm
Weight of the rig 16000 kg
Travel speed
I gear (forward and rear) 0-7 km/h
II gear (forward and rear) up to 12 km/h
Max. incline angle of travel 12°
5. Product line: Face Master 2.5
APPLICATION
Face Master 2.5 - The mechanized drill rig
designed for drilling blastholes of diameters
between 41 mm and 76 mm and of net length
3.2 m. The unit can be used in methane-free
mineral workings.
The rig tramming position height is low (2.2m),
and traction capability, comfort, safe operation
and drilling coverage are the same as units of
height 2.5 m and higher.
Coverage: 40 m2
TECHNICAL DATA:
Height of the rig in tramming position 2200 mm
Width of the rig 2200 mm
Length of the rig 12500 mm
Outer turn radius 7250 mm
Inner turn radius 2800 mm
Weight of the rig 16500 kg
Travel speed
I gear (forward and rear) 0-7 km/h
II gear (forward and rear) up to 12 km/h
Max. incline angle of travel 12°
6. Product line: Unimaster Mk 2
TECHNICAL DATA:
Height of the rig in tramming position 2600 mm
Width of the rig 2300 mm
Length of the rig 12570 mm
Outer turn radius 7150 mm
Inner turn radius 3190 mm
Weight of the rig 18650 kg
Travel speed
I gear 0-3 km/h
II gear up to 5 km/h
III gear up to 8 km/h
Max. incline angle of travel 8°
APPLICATION
The Boart Longyear Unimaster Mk 2 is a
diesel driven single boom machine. It is fitted
with
a powershift transmission, permanently locked
in four-wheel drive; hydraulically powered
centre articulation steering and rear axle
oscillation.
Coverage: 45m2.
7. Product line: Multimaster Mk 2
TECHNICAL DATA:
Height of the rig in tramming position 3100 mm
Width of the rig 3000 mm
Length of the rig 11600 mm
Outer turn radius 7282 mm
Inner turn radius 3195 mm
Weight of the rig 23500 kg
Travel speed
I gear 0-3.5 km/h
II gear up to 6.0 km/h
III gear up to 11.5 km/h
Max. incline angle of travel 8°
APPLICATION
The Boart Longyear Unimaster is a diesel
driven twin boom machine. It is fitted with
a powershift transmission, permanently locked
in four-wheel drive; hydraulically powered
centre articulation steering; rear axle
oscillation.
Coverage: 55m2.
8. Product line: Roof Master 1.5
APPLICATION
Roof Master 1.5 - The Mechanized Roof
bolter for low seams is designed for
bolting roofs and walls in low seams
(minimum height 1.5m). The drilling
system of the unit enables the operator to
drill holes for bolts in rock of compressive
strength Rc 240 MPa. Dry drilling is
performed by the rotary method which has
the added advantage of very efficient dust
collection system.
TECHNICAL DATA:
Height of the bolter
in tramming position 2200 mm
Width of the rig 2200 mm
Length of the rig 12500 mm
Outer turn radius 7250 mm
Inner turn radius 2800 mm
Weight of the rig 16500 kg
Travel speed
I gear (forward and rear) 0-7 km/h
II gear (forward and rear) up to 12 km/h
Max. incline angle of travel 12°
9. Product line: Roof Master 2.0
APPLICATION
Roof Master 2.0 - The Mechanized Roof
bolter for low seams is designed for bolting
roofs and walls in low seams (minimum height
2.0 m). The drilling system of the unit enables
the operator to drill holes for bolts in rock of
compressive strength Rc 240 MPa. Dry
drilling is performed by the rotary method which
has the added advantage of very efficient dust
collection system.
TECHNICAL DATA:
Height of the bolter
in tramming position 1700 mm
Width of the rig 2300 mm
Length of the rig 10500 mm
Outer turn radius 5990 mm
Inner turn radius 3600 mm
Weight of the rig 18600 kg
Travel speed
I gear (forward and rear) 0-6 km/h
II gear (forward and rear) up to 12 km/h
Max. incline angle of travel 12°
10. Product line: Roof Master 2.0 AR-D/E
APPLICATION
The Boart Longyear - Poland SWK-AR-DE
(Diesel/Electric) roof bolter articulated machine has been
specially designed for the drilling requirements of Lubin
mine by BLE-BL and J.H.Fletcher - USA.
It combines the maneuverability of an articulated chassis,
the tramming capacibility of a diesel engine and
powerschif transmission, and possibility of drilling from
either the diesel engine or electric motor.
TECHNICAL DATA:
Height of the bolter in tramming position 1930 mm
Width of the rig 2600 mm
Length of the rig 10800 mm
Outer turn radius 6820 mm
Inner turn radius 3650 mm
Weight of the rig 23600 kg
Travel speed
Maximal speed 18 km/h
Max. incline angle of travel 10°
11. Product line:Roof Master 2.0 W.K
APPLICATION
The Roof Master 2.0-W.K. Roof bolter
machine has been specially designed
for roofbolting duty in low seam
applications from 2m. The mast is
equipped with rotary drillhead and
torque unit, as a option could be equip
with carousel magazine.
TECHNICAL DATA:
Height of the bolter
in tramming position 1800 mm
Width of the rig 2300 mm
Length of the rig 11700 mm
Outer turn radius 5600 mm
Inner turn radius 2900 mm
Weight of the rig 17380 kg
Travel speed
I gear (forward and rear) 0-6 km/h
II gear (forward and rear) up to 12 km/h
Max. incline angle of travel 11°
12. Product line: Roof Master 2.5 Automat
APPLICATION
Roof Master 2.5 - This Mechanized Roof bolter is
designed for bolting roofs and walls in methane-free
environment. Depending on the specifications of the
machine, the Roof Master 2.5 is used for mechanized bolting
with friction or resin bolts to a maximum length of 2.2 m. It is
designed to drill holes for bolts ranging from 26 to 38 mm in
diameter. Depending on the type of rock drill used, drilling
may be rotary or rotary-percussive.
TECHNICAL DATA:
Height of the bolter
in tramming position 2200/2450 mm
Width of the rig 2200 mm
Length of the rig 12500 mm
Outer turn radius 7300 mm
Inner turn radius 2800 mm
Weight of the rig 16500 kg
Travel speed
I gear (forward and rear) 0-7 km/h
II gear (forward and rear) up to 12 km/h
Max. incline angle of travel 12°
13. Product line: New Development
Roof Master 2.5
Face Master 2.5
Technical assumption:
Universal carrier for both applications:
Drilling machine and Roofbolter
Hydraulic system based on the same
components for both applications.
Variable elevation of the boom to cover
area from 40 to 45 m²
The same braking system.
The same drive line.
The same operator`s cabin.
Universal B40L boom.
Four – wheel drive
Central lubricated carrier frame
Options:
Power – shift transmission
Hydrostatic transmission
Air conditioned operator`s cabin
Precise parallel system of the boom
Data control system
- graphic display
- angle sensors
- drilling depth sensor