4 page Norse flyer

1. Order Norse 4P0810
Latches or
send RFQs 800-54-NORSE
100 South Road
right from our
Torrington, CT 06790 USA
website! © Norse Inc. 2008
HIGHLY VERSATILE LATCHING SYSTEMS
QUALIFIED & PROVEN IN AEROSPACE, MILITARY, OEM, COMMERCIAL and CONSUMER APPLICATIONS
• Proprietary spring loaded latch mechanism. • For wood and metal fabrication.
• High clamping forces – 200 or 450 lbs. • Simpler and more advantageous panel preparation
• Unexcelled application versatility due to the and installation.
numerous latch/receiver combinations. • Surface mounting externally or internally,
• Compensates for shrinkage, swelling, wear, or mortised in-place.
and fabrication tolerances. • May be ganged and operated remotely at 90 . °
• Vibration proof. Always a tight joint. • Plated steel materials, SS/special.
• Sealed units available. • Keys and handles stocked.
• Self storing – nothing “hangs out.” • Call for design assistance.
Type 1 Type 2 Type 3
Latch Latch Latch
• 2 Sizes • 2 Sizes • For Thick
• Sealable • The Thin One Panels
• Left- & Right- • Flange/Flange • Flange/Flange
Handed • Reverse Flange • Reverse Flange
• Can Be Ganged • Multiple Receivers • Multiple Receivers
• Multiple Receivers • Can Be Ganged • Can Be Ganged
• Surface Mounted • Mortised in Place • Mortised in Place
SX ShutterUp ®
Gear Head
Latch Latches Screw &
• Left- & Right- • FAST Shutter Erection Wood Insert
Hand Operated • Tested to Hurricane • Stair Rail Butt
• Many Uses Standards & Corner Joints
Including Shutter • Multipanel Joints • Non-Progressive
Mounting • Corner Joints Assembly
• Protects Any Window • Tighten w/
• Multiple Receivers
or Door Opening Ratchet Wrench
• Surface Mounted
Including STORE Windows • Quick Operating
NON-ENCASED RECEIVERS USED WITH LATCHES SHOWN ABOVE. NUMEROUS LATCH/RECEIVER COMBINATIONS POSSIBLE.
‘U’ ‘D’ ‘J’ ‘JL’
‘T’ Big ‘T’ ‘M’ ‘P’ Hinge 90° Angle Frame Slot
‘O’ ‘OD’ ‘O’ ‘OD’ Variable
‘H’ Rod ‘SP’ ‘P’ ‘PL’ Angle Tube
Variable Angle Cup Slot Channel Very Shallow Receivers
ACCESSORIES
Keys
Cover Buttons
Spring Fingers,
Wrenches Braces
Tools
Cover Plates
1
Handles Shafts Ganged–Remote & 90° Operation

2. 100 South Road, Torrington, CT 06790 USA
Tel: (860) 482-1532 • Fax: (860) 482-5059 800-54-NORSE
TORRINGTON, CT USA
© Norse Inc. 2009
www.norse-inc.com 4P0810
LATCHES for • Aircraft • Electronic Cabinets • Exhibits • Pre-Fab Structures
Panel joining, thick & thin, for trade booths, office landscaping, stage scenery, displays, etc. Surface mounted when feasible with no panel
preparation, or concealed by mortising in place. Plant floor offices, tool rooms, QC areas, machine & furnace enclosures, shelving, military
electronic shelters, partitioning, KD institutional furniture, kiosks, saunas, dressing rooms, elevator cabs, refrigerator rooms.
1. Panel Assembly – Thick or Thin Butt, 2. Butt, ‘T’ & 4-way Joints in Tubing. 3. 4-way Joints – Wooden Post. Type 4. 4-way Joints – Wooden Post. Type 2
‘T’ and Corner Joints.Type 2 or Type 3 Type 2 Latch (see TDSs 76 & 96). 2 or Type 3 Latches (see TDSs 66, 91, or Type 3 Latch & Receiver (see TDSs
Latches (see TDSs 61, 81, 106 & 108) 93, 114 & 116). 66, 91, 93, 114 & 116).
5. Polygonal Kiosks Can be Fabricated 6. Polygonal Structures, Three or More 7. Polygonal Structures, Three or More 8. Panel Mounting To Thin Wall Tube.
with Type 1, Type 2 or Type 3 Latches Panels, With/Without Tube Corners. Type 1 Panels. Type 1, Type 2 or Type 3 Type 2 or Type 3 Latches (see TDSs
(see TDS 16-2A, 36-2A & 106). or Type 2 Latches & Slot Receiver (see Latches (see TDSs 18, 43, 62, 72, 89, 92 66, 93 & 115).
TDSs 28, 43, 62, 72, 89 & 92). & 106).
9. Panel Joint - Surface Mounting. Type 10. Below Counters & Decks – Surface 11. Below Counters & Decks – 12. Deck Joint – Mortise In Place. Type
1 Latch & Receiver (see TDSs 16 & 36). Mount. Type 1 Latch & Receiver (see Recessed. Type 1 Latch & Receiver 2 Latch & Receiver (see TDSs 62, & 89).
TDSs 16, 24, 36 & 44). (see TDSs 16, 24, 36, & 44).
A B A B
13A. Box – Internally Mounted. Type 2 13B. Box – Internal Mounting on Metal. 14A. Box – Internal Mounting on Metal. 14B. Box – Internal Mounting on Metal.
Latch & Slot Receiver (see TDSs 63, Type 2 Latch & Slot Receiver (see TDSs Inner Face, Tamperproof. Type 1 Latch Type 1 Latch. See Fig-14A. (See TDSs
69 & 72). 63, 69 & 72). (see TDSs 18, 25, 38 & 45). 18, 25, 38 & 45.)
15. Door – Surface Mount, 90° Attach- 16. Door – Surface Mount Same Plane 17. Door – Surface Mount Same 18. Type 1 Latch Surface Mounted – 90°
2 ment. Type 1 Latch & ‘U’ Receiver (see Attachment. Type 1 Latch & “J” Receiver Plane Attachment. Type 1 Latch & Attachment to Flush-Mortised Type 2
TDSs 17, 18, 37, 38 & 149). (see TDSs 17, 18, 37, 38 & 149). Type 1 Receiver (see TDSs 17, 18, 37, RSL Receiver (see TDSs 16-1B & 2B, 18,
38 & 149). 22, 38 & 42).

3. 100 South Road, Torrington, CT 06790 USA
Tel: (860) 482-1532 • Fax: (860) 482-5059 800-54-NORSE
TORRINGTON, CT USA
© Norse Inc. 2009 www.norse-inc.com 4P0810
LATCHES for • Windows • Doors • Floors • Kiosks • Furniture • Store Fixtures • Hoods
Camper caps, trailer covers, vehicle hoods & access panels, raised electrical access flooring, medical equipment shrouds, solar
panels, sky lights, industrial filters, fume hoods, dust collectors, sectional conference tables, counters, bars, student carrels,
sectional hanger doors, sliding, hinged, folding pocket & patio doors, hatchway, closets and barn doors, display panels, accent columns.
1. Type 3 Latch & Type 2 Receiver. 2. Thin Panels – Butt, “T” and Corner 3. Variable Angle Joints, Free Standing 4. Variable Angle Joint To Wall. Type 2
Cover Button & Cover Plates are Also Joints. Type 2 Latches (see TDSs 62, or To Wall. Type 2 or Type 3 Latch and or Type 3 Latch & Hinge (see TDSs 75,
Shown (see TDSs 127 & 128). 66, 82, 89, 91 & 93) “O”, “OD” & Cup Receivers (see TDSs
62, 66, 82, 89, 91 & 93). 86 & 113).
5. “T” Joint to Surface-Mounted 6. Conference Tables, Counters & 7. Tables and Wall Sections. Type 2 8. Church Pew Section, Type 1 Latches
Receiver. Type 2 or Type 3 Latch & “U” Decks. Type 1 or Type 2 Latch & Latch Mortised in Place (see TDSs 62, & Type 2 Flush Receivers –Floor
Receiver (see TDSs 70-2, 85, & 112). Receiver (see TDSs 24, 36, & 44). 82 & 89). Unobstructed (see TDS 22, 29, 42, & 49).
9. “Jiffy” Rooms or Partitions, No Panel 10. Panel Joint – Metal/Wood. Type 1 11. Box Sealed – Internal Mounting. 12. Product Appearance, Sealing &
Preparation, Surface Mount. Type 1 Latch & “PL” Receiver (see TDSs 20 & Type 1 Latch & Type1 Receiver (see Latch Protection By Internal Mounting
Latch (see TDSs 20 & 40). 40). TDSs 25 & 45). (see TDSs 25 & 45).
13. Box – Surface Mount – Metal/Wood. 14. Box – Surface Mount – Metal/Wood. 15. Box – Surface Mount – Metal/Wood, 16. Type 1R Latch & “ITR” Receiver
Type 1 Latch & ‘J’ Receiver (see TDSs Type 1 Latch & ‘JL’ Receiver (see TDSs No Key Required. Type SX Latch & Force Access Panel Inward To Seal
19 & 39) 19 & 39) ‘J’ Receiver (see TDS 167). (see TDSs 21 & 41).
17. Door – Recessed Mount – In-Line 18. Door – Surface Mount – 90° Attachment. 19. Door, Recessed Mount – In-Line 20. Door, Recessed Mount – In-Line
Attachment. Type 2 Latch, Frame Slot Type1 Latch & Slot Receiver (see TDSs Attachment. Type 2 Latch & “U” Attachment. Type 2 Latch (see TDSs
Receiver (see TDSs 63, 83 & 149). 17, 18, 37, 38 & 149). Receiver (see TDS 64). 63, 83 & 149).
3

4. 100 South Road, Torrington, CT 06790 USA
Tel: (860) 482-1532 • Fax: (860) 482-5059 800-54-NORSE
TORRINGTON, CT USA
© Norse Inc. 2009 www.norse-inc.com 4P0810
LATCHES for • Aircraft • Sealed Cases • Shields • Clamping Devices • Electronics • Stair Rails
Norse single Latches and Multilatches® are used on electronic enclosures, radar screen positioning, quick release machine guards, acoustical barriers, weld area
shields, sealed containers, lighting enclosures, shipping crates, display & instrument cases, pickup truck tool boxes, coffins, emergency exit ramp releases,
interior partitions, compartment Latches, access panels, nonprogressive stair rail joints, couplings to newel posts and to walls.
1. Hurricane Shutter is Surface Mounted on 2. Mounting Hurricane Panels Flush Inside 3. Joining Multiple Shutters Across Wide 4. Join Shutters Around Angled Corners
Window Frame Face with Type 1 “ShutterUp” Window Frame is Quick with “ShutterUp” Type and High Openings (Windows, Doors, for Bay Windows, Storefronts, Any
Latches and Big “T” Receivers (see TDS 207-1). 1 Latches & “T” Receivers (see TDS 207-2). Stores) Using Battens (see TDS 207-3). Enclosure/Structure (see TDS 207-4).
5. Hood – Internal Mount Ganged. Type 6. Type 2 Latches (shown) & Type 1 7. Aircraft Emergency Door Ramp 8. Box – Internal Mounting In Wood by
1, Type 2 or Type 3 Latch and “U” & Type 3 Also, Can Be “Ganged” Release. Special Type 1 Latch (see Surface Mount, Recessing or Mortising
Receiver (see TDSs 26, 46, 68, 88 & 155). (see TDSs 26, 46, 68, 88 & 118). TDS 226). (see TDSs 18, 22, 38 & 42).
9. Type 2 Latch Using a Slot Receiver 10. Hood Attachment, Internal Mount. 11. Shroud Attachment – Bottom Lever 12. Self Standing Shields, Snap On/Off.
Shown Here Holding a Tool Box Onto a Type 2 Latch & Slot Receiver (see Operated. Type 2R Latch & “J” Receiver Type 1 Latch & ‘U’ Receiver (see TDSs
Pickup Truck Tray (see TDS 72 & 92). TDSs 23, 25, 43, 45 & 72). (see TDSs 67 & 90). 20 & 40).
13. Shelf/Desk - Attach to Wall. 14. Wall Mtd. Equip. Module - Type 1 15. Type 1R Latches & “U” Receivers 16. Stair Rail Joints – Non Progressive
Type 1 Latch & ‘U’ Receiver (see TDS Latches & ‘U’ Rec. is Mtd. Outside Quickly Attach Generator Cover, Store Gear Head Screw & Wood Insert (see
18 & 38). or Inside (See TDS 17, 18, 37 & 38) Flat (see TDS 38). TDS 221).
17. A Type 3 Latch and a “Mushroom” 18. Variable Angle Joining of Panels to 19. Variable Angle Attachment of 20. Variable Angle Attachment of
Receiver Internally Mounted Axially a Large “O” Receiver – Free-Standing Panels Using an “O” Receiver (see Panels to a Wall Using an “OD”
Join Two Tubes (see TDS 121). or Attached to a Wall (see TDS 95). TDS 95). Receiver (see TDS 95).
4 21. Acoustical Barrier Wall-Quickly Erected 22. Machine Guard - Quick Attch. and 23. Channel or Angle Joint. Type 2 or 24. Metal Panel Joints. Type 1 or Type
or Moved. Type 1, Type 2 or Type 3 Latch Release. Type 1 Latch & Tube Slot (see Type 3 Latch (see TDSs 72, 92 & 117). 2 & Slot Receiver (see TDSs 23 and 43).
(see TDSs 36, 81 & 106). TDSs 18 & 38)