SlideShare une entreprise Scribd logo
1  sur  14
Télécharger pour lire hors ligne
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
1
P
INTRODUCTION
 So far in the earlier chapter we did the motion analysis of moving particles
without taking into account the forces responsible for the motion. From this
chapter we begin our motion analysis involving the forces responsible for
the motion. This analysis is known as kinetics. Here we will analysis motion
of moving cars, elevators, blocks, airplanes, rockets etc. treating them as a
particle, since rotation of these bodies about their own Centre of gravity, if
any, is neglected.
 In this chapter we will extensively use the Newton's Second law approach to
kinetics. As stated further, this approach involves determination of
acceleration of the moving particle by knowing the forces acting on the
particle. Having determined the acceleration, the analysis is completed-
using kinematic relations which we have studied in previous chapter.
NEWTON'S SECOND LAW OF MOTION
 Newton's second law of motion states "The rate of change of momentum of a
body is directly proportional to the resultant force and takes place in the
direction of the force”.
 Consider a particle acted upon by several forces as shown in Fig. 10.1. Let
F be the resultant force. Because of the resultant force, the particle would
move in the direction of the resultant force. If u is the initial velocity, v is
final velocity and this change takes place in t sec, we have from Newton’s
second law:
 Rate of change of Momentum = Resultant Force
i.e.
Finalmomentum - Initial momentum
Time
F 
( )
mv mu
F
t
v u
F m
t

 

 
or F m a   …………10.1
Kinetics of Particles-Newton's 2nd Law
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
2
 Equation 10.1 is the mathematical expression of Newton's Second Law and
this gives rise to another statement of Newton's Second Law, which is "If
the resultant force acting on a particle is not zero, the particle will have an
acceleration proportional to the magnitude of the resultant and in the
direction o' the resultant force'.
 Equation 10.1 is a vector relation since both the force and acceleration are
vector quantities. The scalar relations from 10.1 can be developed as,
x x
m aF   …… [10.2 (a)]
y y
m aF   …… [10.2 (b)]
z z
m aF   …… [10.2 (c)]
 Since we will normally restrict our analysis to coplanar forces, the
equations 10.2 (a) and 10.2 (b) will be mainly used.
D'ALEMBERT'S PRINCIPLE
 Referring to equation 10.1 we have
F m a  
 This is Newton's Second Law equation and relates the particle's
acceleration to the resultant of the external forces acting on the particle.
The equation is vector a equation where the resultant force vector is
equated to the ma vector.
 Transposing the R.H.S. of the equation 10.1 we get,
0F ma   …… [10.3]
 The above equation is a dynamic equilibrium equation put forth by
D'Alembert. The ma vector is treated as an inertia force and when added
with a negative sign to all other forces, results in equilibrium state of
particle.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
3
 Figure shows the dynamic equilibrium state of
1) A block sliding down a rough inclined plane
2) A sphere tied to a string, swinging as a pendulum to a lower position.
 Particle's acceleration can be found out by D'Alembert's principle, by
developing the figure representing a dynamic state and using the
equilibrium equations used in static viz.,
0 and 0F Fx y   
 Newton's Second Law approach to kinetics is more realistic than the
D’Alembert's principle since it does not involve inertia forces and does not
refer to an equilibrium state of a moving particle. We would therefore solve
the problems in kinetics involving forces and acceleration using Newton's
Second Law equation.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
4
N S L EQUATIONS APPLIED TO RECTILINEAR MOTION
 Application of Newton's equations to determine the acceleration of
rectilinear moving particles should be carried out by a systematic approach
as explained below.
step (1) Draw the FBD showing all the forces acting on the moving
particle. I more than one particle is involved, the particles may be
isolated and separate FBD may be drawn.
step (2) By the side of FBD, draw the Kinetic Diagram (KD) which shows
the particle with a ma vector acting on it. The magnitude of ma
vector is the product of particle's mass and its acceleration. ma
vector acts in the direction of particle's acceleration.
step (3) Equations of Newton's second law viz 10.2 (a) and I0.2 (b) are now
used, taking help of the FBD and KD drawn earlier. The particle's
acceleration is thus obtained.
 To understand the above outlined x steps, let us find out the
acceleration of a block of mass m which is being pulled up an
inclined plane by force P applied parallel to the plane. Let k N
be the kinetic coefficient of friction between the block and
plane. As the block moves up, the rough inclined surface
develops a frictional force k N down the plane.
 The FBD of the block showing the forces and the corresponding
Kinetic Diagram showing the ma vector is drawn as shown in
figure. Taking the x and y axes as shown and using equation
10.2 (a) of the Newton's Second Law we have,
k Substituting the value of N from equation (2) in (1)
 
 
sin cos
sin cos
k
k
P mg mg ma
P mg
a
m
  
  
  
 
 
 Thus knowing the forces acting on the particle, its acceleration
can be found out.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
5
EXERCISE 1
1. A 100 kg crate is projected on a horizontal floor
with an initial speed of 10 m/s. If tr1" = 0.4 and
p1 = 0.3, calculate the distance traveled and the
time taken by create to come to rest.
2. A block of mass 30 kg is placed on a plane. k Between the block and
plane is 0.3. If a force of 250 N is acting on the block, find its acceleration
for the two cases shown.
3. Find force P required to accelerate the block shown in
figure at 2.5 m/s2. Take p = 0.3.
4. Two blocks A and B are placed 15 m apart and are released simultaneously
from rest. Calculate the time taken and the distance traveled by each block
before they collide.
5. Two blocks A of weight 500 N and B of weight 300 N
are 10 m apart on an inclined plane as shown in
figure.  = O.2 for block A and 0.3 for block B. If the
blocks begin to slide down simultaneously calculate
the time and the distance travelled by each block
when block A touches block B.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
6
6. Two blocks A and B rest on an inclined plane as shown. Find their
acceleration on being released from rest. Also find the contact force between
the blocks.
7. Three blocks m1 and m2 and m3 of masses 1.5 kg, 2 kg and 1 kg
respectively are placed on a rough surface with  = O.2O as shown. If a
force F is applied to accelerate the blocks at 3 m/s2 what will be the force
that 1.5 kg block exerts on 2 kg block.
8. A package of total weight 4OO0 N is being pulled up a slope by a steel cable
exerting a force F = (50 t2 + 25OO) N. Knowing that the velocity of the
package was 5 m/s at t = 0, find the acceleration and velocity of the
package at t=8 sec.
9. An airplane of mass 30,000 kg starts from rest and runs on the runway for
1500 m before it takes off. If the airplane engines developed a constant
thrust of 50 kN and the air resistance force acting on the plane is F = 3 v2
(where F is in Newton and v is in m/s), find the takeoff velocity of the
airplane.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
7
10. A particle of mass 3 kg initially at rest at the origin is set in rectilinear
motion by a force varying with time as per the graph shown. Find
a) The velocity and position of the particle at t =1O sec.
b) The time and position at which the particle comes to rest
c) The time at which the particle comes again to its original position.
11. A locomotive train weighing 5OOO kN exerts a constant pull of 120 kN. The
train starts from rest on a level track and attains a speed of 9O kmph, after
which steam is suddenly shut off, slowly bringing it to a halt. If the tractive
resistance is 15 N/kN of the eight of the train, find the total distance
covered by the train and the total time to cover this distance. What is the
maximum power developed by the engine?
12. A vertical lift of total mass 750 kg acquires an upward velocity of 3 m/s
over a distance of 4m moving with constant acceleration starting from rest.
Calculate the tension in the cable.
13. A 400 kg lift-carrying a 60 kg person travels vertically up starting from rest
and acquires a velocity of 4m/s in a distance of 3m of motion. Find the
tension in the cable supporting the lift and the force transmitted by the
person on the lift floor. Does the person feel normal or heavy or light.
a) The lift is now brought to a halt from the speed of 4 mf s, in 2 sec time.
What is the force exerted by the man on the floor of the lift and how does
he feel now.
14. Two blocks A and B are connected by a rope and move on a rough
horizontal plane under a pull of 60 N as shown. If p is 0.2 between the
blocks and the surface, find the acceleration of the blocks and the tension
in the rope.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
8
15. Two masses l.4kg and 7kg connected by a flexible
inextensible cord rest on a plane inclined at 45 with the
horizontal as shown in figure. When the masses are
released what will be the tension T in the cord?
Assume the coefficient of friction between the plane
and the 14 kg mass as 0.25 and between the plane
and the 7kg mass as 0.375.
16. Two particles of masses mA = 5 kg and m= 10 kg
are supported as shown. acceleration of the
blocks
a) if the horizontal surface is smooth
b) if the horizontal surface is rough coefficient of kinetic friction k = Q.4
17. Calculate the vertical acceleration of the 10O kg block and the tension in
the connecting string. Neglect friction.
18. Determine the tension in the string and the velocity of 1500N block shown
in the figure 5 sec after starting from rest.
19. Determine the weight WA of block A required to
bring the system to stop in 6 sec, if at the instant
shown, the block C is moving down at 5 m/s.
Given WB = 2OO N, Wc = 600 N. Take the pulley to
be smooth.
a) Find weight WA to bring the system to stop in 5
sec., If at the instant shown, vc = 3 m/s  , WB
=150N and WC=500N.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
9
20. At a given instant 5O N block A is moving downwards with a speed of 1.8
m/sec. determine its speed 2 sec. later. Block 'B' has a weight 2O N, and
the coefficient of kinetic friction between it and the horizontal plane is k =
0.2. Neglect the mass of pulleys and chord. Use D’Alembert’s principle.
21. Two blocks A and B are connected by an inextensible string as shown.
Neglecting the effect of friction, determine the acceleration of each block
and tension in the cable.
22. Masses A (5 kg), B (10 kg), (2O kg) are connected as shown in the figure by
inextensible cord passing over massless and frictionless pulleys. The
coefficient of friction for masses A and B with ground is 0.2. If the system is
released from rest, find acceleration of the blocks and tension in the cords.
23. The two blocks starts from rest. The horizontal plane and the pulley are
frictionless. Determine the acceleration of each blocks and tension in the
cord.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
10
24. Block A (7 kg), B (12 kg), - (30 kg) are connected by an inextensible string
as shown. If the system is released from rest find the accelerations of each
block and tension in the cord. Assume smooth surfaces.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
11
N S L EQUATIONS APPLIED TO CURVILINEAR MOTION
 For curvilinear moving particles, the kinetic diagram shows the components
of ma vector viz, man, and mat. The man component acts towards the
centre of path while the mat component acts tangent to the path. Both the
components lie in the plane of curvilinear motion.
EXERCISE 2
1. A steel bob of mass 5 kg tied to a string of 3 m length is whirled with a
constant speed, such that the bob moves in a circle in the horizontal plane.
If the string makes an angle of 30" with the vertical, find the speed of the
bob and tension in the string.
2. A car weighing 12 kN goes round a flat curve of 90 m radius. Determine the
uniform limiting speed of the car in order to avoid outward skidding. Take µ
= 0.35
3. Figure shows two vehicles moving at 90 kmph on a road. Knowing that µ=
0.5 between road and the tyres. Determine total acceleration of each vehicle
when the brakes are suddenly applied and the wheels skid.
4. A vehicle of weight 8OO0 N travels with a constant speed of 72 kmph over a
vertical parabolic curve as shown. Find the pressure exerted by the tyres on
the road at the peak B.
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
12
5. In a roller coaster ride, the coaster traveling around the loop ABC needs to
have a certain minimum velocity at the peak B. If the loop diameter is 10
m, find this velocity.
6. A pendulum of mass 600 gms, has a speed of 3.6 m/s at the position
shown. Find the tension in the string and the total acceleration at this
instant.
EXERCISE 3
Theory Questions
Q.1 State Newton's Second Law of Motion.
Q.2 Derive the mathematical expression of Newton's Second Law. Explain
D'Alembert's Principle.
UNIVERSITY QUESTIONS
1. A ball thrown down the incline strike the incline at a distance of 75 m
along. If the ball rises 20 m above the point of projection. Complete the
initial velocity and angle of projection with horizontal. (10 Marks)
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
13
2. The system shown in figure is
released from rest. What is the height
lost by bodies A, B and C in 2
seconds? Take coefficient of kinetic
friction at rubbing surfaces as o.4.
Find also the tension in wires.
(10 Marks)
3. A 50 kg block kept on a 150 inclined plane is pushed down the plane with
an initial velocity of 20 m/s. If kμ =0.4, determine the distance travelled by
the block and the time it will take as it comes to rest. (4 Marks)
4. Two block mA = 10 kg and mB = 5 kg connected with cord and pulley
system as shown in fig. Determine the velocity of each block when system
is started from rest and block B gets displacement by 2 m. Take kμ =0.2
between block A and Horizontal surface. (6 Marks)
5. A body of mass 25 kg resting on a horizontal
table is connected by string passing over a
smooth pulley at the edge of the table to another
body of mass 3.75 kg and hanging vertically as
shown. Initially, the friction between the mass A
and the table is just sufficient to prevent the motion. If an additional 1.25
kg is added to the 3.75 kg mass, find the acceleration of the masse
(4 Marks)
6. State D’ Alembert’s principle with two examples. (4 Marks)
www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com
14
7. Find out min. value of P to start the motion. (8 Marks)
8. Sphere A is supported by two writes AB, AC. Find
out tensions in wire AC:-
(i) before AB is cut
(ii) just after AB is cut. (4 Marks)
9. A block of mass 5kg is released from rest along a 40 degree inclined plane.
Determine the acceleration of the block when it travels a distance of 3m
using D’ Alemberts principle. Take coefficient of friction as 0.2. (4 Marks)
10. The mass of A is 23kg and mass of B is 36kg.
The coefficient are 0.4 between A and B, and 0.2
between ground and block B. Assume smooth
drum. Determine the maximum mass of M at
impending motion. (8 Marks)

Contenu connexe

Tendances

Simple harmonic motion
Simple harmonic motionSimple harmonic motion
Simple harmonic motionKANNAN
 
Stress and strain- mechanics of solid
Stress and strain- mechanics of solidStress and strain- mechanics of solid
Stress and strain- mechanics of solidKaushal Patel
 
Shear stresses on beam (MECHANICS OF SOLIDS)
Shear stresses on beam (MECHANICS OF SOLIDS)Shear stresses on beam (MECHANICS OF SOLIDS)
Shear stresses on beam (MECHANICS OF SOLIDS)Er.Navazhushen Patel
 
Center of Mass and Momentum.pdf
Center of Mass and Momentum.pdfCenter of Mass and Momentum.pdf
Center of Mass and Momentum.pdfJenGomez8
 
mechanics of solids
mechanics of solidsmechanics of solids
mechanics of solidsjayrishabh
 
Topic1_Castiglianos Theorem.pptx
Topic1_Castiglianos Theorem.pptxTopic1_Castiglianos Theorem.pptx
Topic1_Castiglianos Theorem.pptxMary Joanne Aniñon
 
Lec5 total potential_energy_method
Lec5 total potential_energy_methodLec5 total potential_energy_method
Lec5 total potential_energy_methodMahdi Damghani
 
Moment of inertia
Moment of inertiaMoment of inertia
Moment of inertiaUsman Sajid
 
System of Forces - Engineering Mechanics
System of Forces - Engineering MechanicsSystem of Forces - Engineering Mechanics
System of Forces - Engineering MechanicsDr.S.Thirumalvalavan
 
work energy theorem and kinetic energy
work energy theorem and kinetic energywork energy theorem and kinetic energy
work energy theorem and kinetic energyKharen Adelan
 
4.1 simple harmonic motion
4.1 simple harmonic motion4.1 simple harmonic motion
4.1 simple harmonic motionJohnPaul Kennedy
 

Tendances (20)

Moment
MomentMoment
Moment
 
Unit 5 rigid body dynamics
Unit 5 rigid body dynamicsUnit 5 rigid body dynamics
Unit 5 rigid body dynamics
 
Simple harmonic motion
Simple harmonic motionSimple harmonic motion
Simple harmonic motion
 
First moment of area
First moment of areaFirst moment of area
First moment of area
 
Stress and strain- mechanics of solid
Stress and strain- mechanics of solidStress and strain- mechanics of solid
Stress and strain- mechanics of solid
 
Shear stresses on beam (MECHANICS OF SOLIDS)
Shear stresses on beam (MECHANICS OF SOLIDS)Shear stresses on beam (MECHANICS OF SOLIDS)
Shear stresses on beam (MECHANICS OF SOLIDS)
 
Center of Mass and Momentum.pdf
Center of Mass and Momentum.pdfCenter of Mass and Momentum.pdf
Center of Mass and Momentum.pdf
 
mechanics of solids
mechanics of solidsmechanics of solids
mechanics of solids
 
Force & Equilibrium
Force & EquilibriumForce & Equilibrium
Force & Equilibrium
 
Topic1_Castiglianos Theorem.pptx
Topic1_Castiglianos Theorem.pptxTopic1_Castiglianos Theorem.pptx
Topic1_Castiglianos Theorem.pptx
 
Free body diagram
Free body diagramFree body diagram
Free body diagram
 
Lec5 total potential_energy_method
Lec5 total potential_energy_methodLec5 total potential_energy_method
Lec5 total potential_energy_method
 
Moment of inertia
Moment of inertiaMoment of inertia
Moment of inertia
 
System of Forces - Engineering Mechanics
System of Forces - Engineering MechanicsSystem of Forces - Engineering Mechanics
System of Forces - Engineering Mechanics
 
Rigid body
Rigid bodyRigid body
Rigid body
 
Bending stresses in beams
Bending stresses in beamsBending stresses in beams
Bending stresses in beams
 
work energy theorem and kinetic energy
work energy theorem and kinetic energywork energy theorem and kinetic energy
work energy theorem and kinetic energy
 
4.1 simple harmonic motion
4.1 simple harmonic motion4.1 simple harmonic motion
4.1 simple harmonic motion
 
Chapter 1(3)DIMENSIONAL ANALYSIS
Chapter 1(3)DIMENSIONAL ANALYSISChapter 1(3)DIMENSIONAL ANALYSIS
Chapter 1(3)DIMENSIONAL ANALYSIS
 
Introduction to Engineering Mechanics
Introduction to Engineering MechanicsIntroduction to Engineering Mechanics
Introduction to Engineering Mechanics
 

Similaire à 10. kinetics of particles newton s 2nd law

Kinetics of particles impulse momentum method
Kinetics of particles impulse momentum methodKinetics of particles impulse momentum method
Kinetics of particles impulse momentum methodEkeeda
 
12. kinetics of particles impulse momentum method
12. kinetics of particles impulse momentum method12. kinetics of particles impulse momentum method
12. kinetics of particles impulse momentum methodEkeeda
 
008 newton's second law of motion
008 newton's second law of motion008 newton's second law of motion
008 newton's second law of motionphysics101
 
D alemberts principle
D alemberts principleD alemberts principle
D alemberts principlePralhad Kore
 
Unit 5 mm9400 ver1.1(2014)
Unit 5 mm9400 ver1.1(2014)Unit 5 mm9400 ver1.1(2014)
Unit 5 mm9400 ver1.1(2014)all_engineering
 
Simple harmonic motion and elasticity
Simple harmonic motion and elasticitySimple harmonic motion and elasticity
Simple harmonic motion and elasticityMenelisi Mthethwa
 
Physics stpm term 1 module 1_kelantan2016
Physics stpm term 1 module 1_kelantan2016Physics stpm term 1 module 1_kelantan2016
Physics stpm term 1 module 1_kelantan2016annahiaz
 
Oscillations 2008 prelim_questions
Oscillations 2008 prelim_questionsOscillations 2008 prelim_questions
Oscillations 2008 prelim_questionsJohn Jon
 
Kinetics of particles work energy method
Kinetics of particles work energy methodKinetics of particles work energy method
Kinetics of particles work energy methodEkeeda
 
Kinetics of Particles-Work Energy Method
Kinetics of Particles-Work Energy MethodKinetics of Particles-Work Energy Method
Kinetics of Particles-Work Energy MethodEkeeda
 
11. kinetics of particles work energy method
11. kinetics of particles work energy method11. kinetics of particles work energy method
11. kinetics of particles work energy methodEkeeda
 
Unit 1 questions and solutions
Unit 1 questions and solutionsUnit 1 questions and solutions
Unit 1 questions and solutionsMelelise Lusama
 
Ch 10 SHM & Elasticity
Ch 10 SHM & ElasticityCh 10 SHM & Elasticity
Ch 10 SHM & ElasticityScott Thomas
 
Kinematics of particles
Kinematics of particlesKinematics of particles
Kinematics of particlesGrace Palermo
 
Kinetics of particles
Kinetics of particlesKinetics of particles
Kinetics of particlesGrace Palermo
 

Similaire à 10. kinetics of particles newton s 2nd law (20)

Ch05 ssm
Ch05 ssmCh05 ssm
Ch05 ssm
 
Ch04 ssm
Ch04 ssmCh04 ssm
Ch04 ssm
 
Kinetics of particles impulse momentum method
Kinetics of particles impulse momentum methodKinetics of particles impulse momentum method
Kinetics of particles impulse momentum method
 
12. kinetics of particles impulse momentum method
12. kinetics of particles impulse momentum method12. kinetics of particles impulse momentum method
12. kinetics of particles impulse momentum method
 
008 newton's second law of motion
008 newton's second law of motion008 newton's second law of motion
008 newton's second law of motion
 
D alemberts principle
D alemberts principleD alemberts principle
D alemberts principle
 
Unit 5 mm9400 ver1.1(2014)
Unit 5 mm9400 ver1.1(2014)Unit 5 mm9400 ver1.1(2014)
Unit 5 mm9400 ver1.1(2014)
 
Simple harmonic motion and elasticity
Simple harmonic motion and elasticitySimple harmonic motion and elasticity
Simple harmonic motion and elasticity
 
Physics stpm term 1 module 1_kelantan2016
Physics stpm term 1 module 1_kelantan2016Physics stpm term 1 module 1_kelantan2016
Physics stpm term 1 module 1_kelantan2016
 
Oscillations 2008 prelim_questions
Oscillations 2008 prelim_questionsOscillations 2008 prelim_questions
Oscillations 2008 prelim_questions
 
Kinetics of particles work energy method
Kinetics of particles work energy methodKinetics of particles work energy method
Kinetics of particles work energy method
 
Kinetics of Particles-Work Energy Method
Kinetics of Particles-Work Energy MethodKinetics of Particles-Work Energy Method
Kinetics of Particles-Work Energy Method
 
11. kinetics of particles work energy method
11. kinetics of particles work energy method11. kinetics of particles work energy method
11. kinetics of particles work energy method
 
Unit 1 questions and solutions
Unit 1 questions and solutionsUnit 1 questions and solutions
Unit 1 questions and solutions
 
Ch 10 SHM & Elasticity
Ch 10 SHM & ElasticityCh 10 SHM & Elasticity
Ch 10 SHM & Elasticity
 
Kinematics of particles
Kinematics of particlesKinematics of particles
Kinematics of particles
 
Kinetics of particles
Kinetics of particlesKinetics of particles
Kinetics of particles
 
Work power energy
Work power energyWork power energy
Work power energy
 
11 momentum
11 momentum11 momentum
11 momentum
 
Work, power and energy
Work, power and energyWork, power and energy
Work, power and energy
 

Plus de Ekeeda

Thermit welding
Thermit weldingThermit welding
Thermit weldingEkeeda
 
Plasma arc welding
Plasma arc weldingPlasma arc welding
Plasma arc weldingEkeeda
 
Friction welding
Friction weldingFriction welding
Friction weldingEkeeda
 
Trusses
TrussesTrusses
TrussesEkeeda
 
Space forces
Space forcesSpace forces
Space forcesEkeeda
 
Kinetics of particles newton's 2nd law
Kinetics of particles newton's 2nd lawKinetics of particles newton's 2nd law
Kinetics of particles newton's 2nd lawEkeeda
 
Kinematics of rigid bodies
Kinematics of rigid bodiesKinematics of rigid bodies
Kinematics of rigid bodiesEkeeda
 
Kinematics of particles
Kinematics of particlesKinematics of particles
Kinematics of particlesEkeeda
 
Friction
FrictionFriction
FrictionEkeeda
 
Coplanar forces res & comp of forces - for merge
Coplanar forces res & comp of forces - for mergeCoplanar forces res & comp of forces - for merge
Coplanar forces res & comp of forces - for mergeEkeeda
 
Coplanar forces equilibrium
Coplanar forces equilibriumCoplanar forces equilibrium
Coplanar forces equilibriumEkeeda
 
Centroid and centre of gravity
Centroid and centre of gravityCentroid and centre of gravity
Centroid and centre of gravityEkeeda
 
5. important engineering material
5. important engineering material5. important engineering material
5. important engineering materialEkeeda
 
4. phase rule
4. phase rule4. phase rule
4. phase ruleEkeeda
 
3. lubricants
3. lubricants3. lubricants
3. lubricantsEkeeda
 
2. polymers rubbers
2. polymers   rubbers2. polymers   rubbers
2. polymers rubbersEkeeda
 
1. water
1. water1. water
1. waterEkeeda
 
Merged document 4
Merged document 4Merged document 4
Merged document 4Ekeeda
 
6 nanomaterials
6 nanomaterials6 nanomaterials
6 nanomaterialsEkeeda
 
5 phase rule and steels
5 phase rule and steels5 phase rule and steels
5 phase rule and steelsEkeeda
 

Plus de Ekeeda (20)

Thermit welding
Thermit weldingThermit welding
Thermit welding
 
Plasma arc welding
Plasma arc weldingPlasma arc welding
Plasma arc welding
 
Friction welding
Friction weldingFriction welding
Friction welding
 
Trusses
TrussesTrusses
Trusses
 
Space forces
Space forcesSpace forces
Space forces
 
Kinetics of particles newton's 2nd law
Kinetics of particles newton's 2nd lawKinetics of particles newton's 2nd law
Kinetics of particles newton's 2nd law
 
Kinematics of rigid bodies
Kinematics of rigid bodiesKinematics of rigid bodies
Kinematics of rigid bodies
 
Kinematics of particles
Kinematics of particlesKinematics of particles
Kinematics of particles
 
Friction
FrictionFriction
Friction
 
Coplanar forces res & comp of forces - for merge
Coplanar forces res & comp of forces - for mergeCoplanar forces res & comp of forces - for merge
Coplanar forces res & comp of forces - for merge
 
Coplanar forces equilibrium
Coplanar forces equilibriumCoplanar forces equilibrium
Coplanar forces equilibrium
 
Centroid and centre of gravity
Centroid and centre of gravityCentroid and centre of gravity
Centroid and centre of gravity
 
5. important engineering material
5. important engineering material5. important engineering material
5. important engineering material
 
4. phase rule
4. phase rule4. phase rule
4. phase rule
 
3. lubricants
3. lubricants3. lubricants
3. lubricants
 
2. polymers rubbers
2. polymers   rubbers2. polymers   rubbers
2. polymers rubbers
 
1. water
1. water1. water
1. water
 
Merged document 4
Merged document 4Merged document 4
Merged document 4
 
6 nanomaterials
6 nanomaterials6 nanomaterials
6 nanomaterials
 
5 phase rule and steels
5 phase rule and steels5 phase rule and steels
5 phase rule and steels
 

Dernier

CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete RecordCCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete RecordAsst.prof M.Gokilavani
 
Coefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxCoefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxAsutosh Ranjan
 
Thermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptThermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptDineshKumar4165
 
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Christo Ananth
 
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
Booking open Available Pune Call Girls Koregaon Park  6297143586 Call Hot Ind...Booking open Available Pune Call Girls Koregaon Park  6297143586 Call Hot Ind...
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...Call Girls in Nagpur High Profile
 
Unit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdfUnit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdfRagavanV2
 
Generative AI or GenAI technology based PPT
Generative AI or GenAI technology based PPTGenerative AI or GenAI technology based PPT
Generative AI or GenAI technology based PPTbhaskargani46
 
Java Programming :Event Handling(Types of Events)
Java Programming :Event Handling(Types of Events)Java Programming :Event Handling(Types of Events)
Java Programming :Event Handling(Types of Events)simmis5
 
Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...
Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...
Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...Christo Ananth
 
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlyKubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlysanyuktamishra911
 
data_management_and _data_science_cheat_sheet.pdf
data_management_and _data_science_cheat_sheet.pdfdata_management_and _data_science_cheat_sheet.pdf
data_management_and _data_science_cheat_sheet.pdfJiananWang21
 
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756dollysharma2066
 
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...SUHANI PANDEY
 
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...roncy bisnoi
 
Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank  Design by Working Stress - IS Method.pdfIntze Overhead Water Tank  Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank Design by Working Stress - IS Method.pdfSuman Jyoti
 

Dernier (20)

CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete RecordCCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
 
Coefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxCoefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptx
 
Thermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptThermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.ppt
 
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
 
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
Booking open Available Pune Call Girls Koregaon Park  6297143586 Call Hot Ind...Booking open Available Pune Call Girls Koregaon Park  6297143586 Call Hot Ind...
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
 
Unit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdfUnit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdf
 
NFPA 5000 2024 standard .
NFPA 5000 2024 standard                                  .NFPA 5000 2024 standard                                  .
NFPA 5000 2024 standard .
 
Generative AI or GenAI technology based PPT
Generative AI or GenAI technology based PPTGenerative AI or GenAI technology based PPT
Generative AI or GenAI technology based PPT
 
Java Programming :Event Handling(Types of Events)
Java Programming :Event Handling(Types of Events)Java Programming :Event Handling(Types of Events)
Java Programming :Event Handling(Types of Events)
 
Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...
Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...
Call for Papers - Educational Administration: Theory and Practice, E-ISSN: 21...
 
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlyKubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghly
 
data_management_and _data_science_cheat_sheet.pdf
data_management_and _data_science_cheat_sheet.pdfdata_management_and _data_science_cheat_sheet.pdf
data_management_and _data_science_cheat_sheet.pdf
 
Call Girls in Ramesh Nagar Delhi 💯 Call Us 🔝9953056974 🔝 Escort Service
Call Girls in Ramesh Nagar Delhi 💯 Call Us 🔝9953056974 🔝 Escort ServiceCall Girls in Ramesh Nagar Delhi 💯 Call Us 🔝9953056974 🔝 Escort Service
Call Girls in Ramesh Nagar Delhi 💯 Call Us 🔝9953056974 🔝 Escort Service
 
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
FULL ENJOY Call Girls In Mahipalpur Delhi Contact Us 8377877756
 
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
 
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
 
Roadmap to Membership of RICS - Pathways and Routes
Roadmap to Membership of RICS - Pathways and RoutesRoadmap to Membership of RICS - Pathways and Routes
Roadmap to Membership of RICS - Pathways and Routes
 
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
 
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
 
Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank  Design by Working Stress - IS Method.pdfIntze Overhead Water Tank  Design by Working Stress - IS Method.pdf
Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
 

10. kinetics of particles newton s 2nd law

  • 1. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 1 P INTRODUCTION  So far in the earlier chapter we did the motion analysis of moving particles without taking into account the forces responsible for the motion. From this chapter we begin our motion analysis involving the forces responsible for the motion. This analysis is known as kinetics. Here we will analysis motion of moving cars, elevators, blocks, airplanes, rockets etc. treating them as a particle, since rotation of these bodies about their own Centre of gravity, if any, is neglected.  In this chapter we will extensively use the Newton's Second law approach to kinetics. As stated further, this approach involves determination of acceleration of the moving particle by knowing the forces acting on the particle. Having determined the acceleration, the analysis is completed- using kinematic relations which we have studied in previous chapter. NEWTON'S SECOND LAW OF MOTION  Newton's second law of motion states "The rate of change of momentum of a body is directly proportional to the resultant force and takes place in the direction of the force”.  Consider a particle acted upon by several forces as shown in Fig. 10.1. Let F be the resultant force. Because of the resultant force, the particle would move in the direction of the resultant force. If u is the initial velocity, v is final velocity and this change takes place in t sec, we have from Newton’s second law:  Rate of change of Momentum = Resultant Force i.e. Finalmomentum - Initial momentum Time F  ( ) mv mu F t v u F m t       or F m a   …………10.1 Kinetics of Particles-Newton's 2nd Law
  • 2. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 2  Equation 10.1 is the mathematical expression of Newton's Second Law and this gives rise to another statement of Newton's Second Law, which is "If the resultant force acting on a particle is not zero, the particle will have an acceleration proportional to the magnitude of the resultant and in the direction o' the resultant force'.  Equation 10.1 is a vector relation since both the force and acceleration are vector quantities. The scalar relations from 10.1 can be developed as, x x m aF   …… [10.2 (a)] y y m aF   …… [10.2 (b)] z z m aF   …… [10.2 (c)]  Since we will normally restrict our analysis to coplanar forces, the equations 10.2 (a) and 10.2 (b) will be mainly used. D'ALEMBERT'S PRINCIPLE  Referring to equation 10.1 we have F m a    This is Newton's Second Law equation and relates the particle's acceleration to the resultant of the external forces acting on the particle. The equation is vector a equation where the resultant force vector is equated to the ma vector.  Transposing the R.H.S. of the equation 10.1 we get, 0F ma   …… [10.3]  The above equation is a dynamic equilibrium equation put forth by D'Alembert. The ma vector is treated as an inertia force and when added with a negative sign to all other forces, results in equilibrium state of particle.
  • 3. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 3  Figure shows the dynamic equilibrium state of 1) A block sliding down a rough inclined plane 2) A sphere tied to a string, swinging as a pendulum to a lower position.  Particle's acceleration can be found out by D'Alembert's principle, by developing the figure representing a dynamic state and using the equilibrium equations used in static viz., 0 and 0F Fx y     Newton's Second Law approach to kinetics is more realistic than the D’Alembert's principle since it does not involve inertia forces and does not refer to an equilibrium state of a moving particle. We would therefore solve the problems in kinetics involving forces and acceleration using Newton's Second Law equation.
  • 4. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 4 N S L EQUATIONS APPLIED TO RECTILINEAR MOTION  Application of Newton's equations to determine the acceleration of rectilinear moving particles should be carried out by a systematic approach as explained below. step (1) Draw the FBD showing all the forces acting on the moving particle. I more than one particle is involved, the particles may be isolated and separate FBD may be drawn. step (2) By the side of FBD, draw the Kinetic Diagram (KD) which shows the particle with a ma vector acting on it. The magnitude of ma vector is the product of particle's mass and its acceleration. ma vector acts in the direction of particle's acceleration. step (3) Equations of Newton's second law viz 10.2 (a) and I0.2 (b) are now used, taking help of the FBD and KD drawn earlier. The particle's acceleration is thus obtained.  To understand the above outlined x steps, let us find out the acceleration of a block of mass m which is being pulled up an inclined plane by force P applied parallel to the plane. Let k N be the kinetic coefficient of friction between the block and plane. As the block moves up, the rough inclined surface develops a frictional force k N down the plane.  The FBD of the block showing the forces and the corresponding Kinetic Diagram showing the ma vector is drawn as shown in figure. Taking the x and y axes as shown and using equation 10.2 (a) of the Newton's Second Law we have, k Substituting the value of N from equation (2) in (1)     sin cos sin cos k k P mg mg ma P mg a m               Thus knowing the forces acting on the particle, its acceleration can be found out.
  • 5. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 5 EXERCISE 1 1. A 100 kg crate is projected on a horizontal floor with an initial speed of 10 m/s. If tr1" = 0.4 and p1 = 0.3, calculate the distance traveled and the time taken by create to come to rest. 2. A block of mass 30 kg is placed on a plane. k Between the block and plane is 0.3. If a force of 250 N is acting on the block, find its acceleration for the two cases shown. 3. Find force P required to accelerate the block shown in figure at 2.5 m/s2. Take p = 0.3. 4. Two blocks A and B are placed 15 m apart and are released simultaneously from rest. Calculate the time taken and the distance traveled by each block before they collide. 5. Two blocks A of weight 500 N and B of weight 300 N are 10 m apart on an inclined plane as shown in figure.  = O.2 for block A and 0.3 for block B. If the blocks begin to slide down simultaneously calculate the time and the distance travelled by each block when block A touches block B.
  • 6. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 6 6. Two blocks A and B rest on an inclined plane as shown. Find their acceleration on being released from rest. Also find the contact force between the blocks. 7. Three blocks m1 and m2 and m3 of masses 1.5 kg, 2 kg and 1 kg respectively are placed on a rough surface with  = O.2O as shown. If a force F is applied to accelerate the blocks at 3 m/s2 what will be the force that 1.5 kg block exerts on 2 kg block. 8. A package of total weight 4OO0 N is being pulled up a slope by a steel cable exerting a force F = (50 t2 + 25OO) N. Knowing that the velocity of the package was 5 m/s at t = 0, find the acceleration and velocity of the package at t=8 sec. 9. An airplane of mass 30,000 kg starts from rest and runs on the runway for 1500 m before it takes off. If the airplane engines developed a constant thrust of 50 kN and the air resistance force acting on the plane is F = 3 v2 (where F is in Newton and v is in m/s), find the takeoff velocity of the airplane.
  • 7. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 7 10. A particle of mass 3 kg initially at rest at the origin is set in rectilinear motion by a force varying with time as per the graph shown. Find a) The velocity and position of the particle at t =1O sec. b) The time and position at which the particle comes to rest c) The time at which the particle comes again to its original position. 11. A locomotive train weighing 5OOO kN exerts a constant pull of 120 kN. The train starts from rest on a level track and attains a speed of 9O kmph, after which steam is suddenly shut off, slowly bringing it to a halt. If the tractive resistance is 15 N/kN of the eight of the train, find the total distance covered by the train and the total time to cover this distance. What is the maximum power developed by the engine? 12. A vertical lift of total mass 750 kg acquires an upward velocity of 3 m/s over a distance of 4m moving with constant acceleration starting from rest. Calculate the tension in the cable. 13. A 400 kg lift-carrying a 60 kg person travels vertically up starting from rest and acquires a velocity of 4m/s in a distance of 3m of motion. Find the tension in the cable supporting the lift and the force transmitted by the person on the lift floor. Does the person feel normal or heavy or light. a) The lift is now brought to a halt from the speed of 4 mf s, in 2 sec time. What is the force exerted by the man on the floor of the lift and how does he feel now. 14. Two blocks A and B are connected by a rope and move on a rough horizontal plane under a pull of 60 N as shown. If p is 0.2 between the blocks and the surface, find the acceleration of the blocks and the tension in the rope.
  • 8. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 8 15. Two masses l.4kg and 7kg connected by a flexible inextensible cord rest on a plane inclined at 45 with the horizontal as shown in figure. When the masses are released what will be the tension T in the cord? Assume the coefficient of friction between the plane and the 14 kg mass as 0.25 and between the plane and the 7kg mass as 0.375. 16. Two particles of masses mA = 5 kg and m= 10 kg are supported as shown. acceleration of the blocks a) if the horizontal surface is smooth b) if the horizontal surface is rough coefficient of kinetic friction k = Q.4 17. Calculate the vertical acceleration of the 10O kg block and the tension in the connecting string. Neglect friction. 18. Determine the tension in the string and the velocity of 1500N block shown in the figure 5 sec after starting from rest. 19. Determine the weight WA of block A required to bring the system to stop in 6 sec, if at the instant shown, the block C is moving down at 5 m/s. Given WB = 2OO N, Wc = 600 N. Take the pulley to be smooth. a) Find weight WA to bring the system to stop in 5 sec., If at the instant shown, vc = 3 m/s  , WB =150N and WC=500N.
  • 9. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 9 20. At a given instant 5O N block A is moving downwards with a speed of 1.8 m/sec. determine its speed 2 sec. later. Block 'B' has a weight 2O N, and the coefficient of kinetic friction between it and the horizontal plane is k = 0.2. Neglect the mass of pulleys and chord. Use D’Alembert’s principle. 21. Two blocks A and B are connected by an inextensible string as shown. Neglecting the effect of friction, determine the acceleration of each block and tension in the cable. 22. Masses A (5 kg), B (10 kg), (2O kg) are connected as shown in the figure by inextensible cord passing over massless and frictionless pulleys. The coefficient of friction for masses A and B with ground is 0.2. If the system is released from rest, find acceleration of the blocks and tension in the cords. 23. The two blocks starts from rest. The horizontal plane and the pulley are frictionless. Determine the acceleration of each blocks and tension in the cord.
  • 10. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 10 24. Block A (7 kg), B (12 kg), - (30 kg) are connected by an inextensible string as shown. If the system is released from rest find the accelerations of each block and tension in the cord. Assume smooth surfaces.
  • 11. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 11 N S L EQUATIONS APPLIED TO CURVILINEAR MOTION  For curvilinear moving particles, the kinetic diagram shows the components of ma vector viz, man, and mat. The man component acts towards the centre of path while the mat component acts tangent to the path. Both the components lie in the plane of curvilinear motion. EXERCISE 2 1. A steel bob of mass 5 kg tied to a string of 3 m length is whirled with a constant speed, such that the bob moves in a circle in the horizontal plane. If the string makes an angle of 30" with the vertical, find the speed of the bob and tension in the string. 2. A car weighing 12 kN goes round a flat curve of 90 m radius. Determine the uniform limiting speed of the car in order to avoid outward skidding. Take µ = 0.35 3. Figure shows two vehicles moving at 90 kmph on a road. Knowing that µ= 0.5 between road and the tyres. Determine total acceleration of each vehicle when the brakes are suddenly applied and the wheels skid. 4. A vehicle of weight 8OO0 N travels with a constant speed of 72 kmph over a vertical parabolic curve as shown. Find the pressure exerted by the tyres on the road at the peak B.
  • 12. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 12 5. In a roller coaster ride, the coaster traveling around the loop ABC needs to have a certain minimum velocity at the peak B. If the loop diameter is 10 m, find this velocity. 6. A pendulum of mass 600 gms, has a speed of 3.6 m/s at the position shown. Find the tension in the string and the total acceleration at this instant. EXERCISE 3 Theory Questions Q.1 State Newton's Second Law of Motion. Q.2 Derive the mathematical expression of Newton's Second Law. Explain D'Alembert's Principle. UNIVERSITY QUESTIONS 1. A ball thrown down the incline strike the incline at a distance of 75 m along. If the ball rises 20 m above the point of projection. Complete the initial velocity and angle of projection with horizontal. (10 Marks)
  • 13. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 13 2. The system shown in figure is released from rest. What is the height lost by bodies A, B and C in 2 seconds? Take coefficient of kinetic friction at rubbing surfaces as o.4. Find also the tension in wires. (10 Marks) 3. A 50 kg block kept on a 150 inclined plane is pushed down the plane with an initial velocity of 20 m/s. If kμ =0.4, determine the distance travelled by the block and the time it will take as it comes to rest. (4 Marks) 4. Two block mA = 10 kg and mB = 5 kg connected with cord and pulley system as shown in fig. Determine the velocity of each block when system is started from rest and block B gets displacement by 2 m. Take kμ =0.2 between block A and Horizontal surface. (6 Marks) 5. A body of mass 25 kg resting on a horizontal table is connected by string passing over a smooth pulley at the edge of the table to another body of mass 3.75 kg and hanging vertically as shown. Initially, the friction between the mass A and the table is just sufficient to prevent the motion. If an additional 1.25 kg is added to the 3.75 kg mass, find the acceleration of the masse (4 Marks) 6. State D’ Alembert’s principle with two examples. (4 Marks)
  • 14. www.ekeeda.com Contact : 9029006464 Email : care@ekeeda.com 14 7. Find out min. value of P to start the motion. (8 Marks) 8. Sphere A is supported by two writes AB, AC. Find out tensions in wire AC:- (i) before AB is cut (ii) just after AB is cut. (4 Marks) 9. A block of mass 5kg is released from rest along a 40 degree inclined plane. Determine the acceleration of the block when it travels a distance of 3m using D’ Alemberts principle. Take coefficient of friction as 0.2. (4 Marks) 10. The mass of A is 23kg and mass of B is 36kg. The coefficient are 0.4 between A and B, and 0.2 between ground and block B. Assume smooth drum. Determine the maximum mass of M at impending motion. (8 Marks)