The 15 Minute Breakdown: 2024 Beauty Marketing Study
Multi-Function Digital Indicator Features Under 40 Characters
1. FEATURES
OPTIONS
MULTI-FUNCTION DIGITAL INDICATOR
• Low cost application.
• Industrial field application
• Special design to eliminate EMI/ RFI.
• High speed A/D conversion rate of 128 times/sec.
• High Resolution 10,000,000 counts.
• One (1) full duplex RS-232 communication
• Interface is built in standard type.
• Power for drive 8 350Ω load cells or 16 700Ω load cells.
• Easy to use front keyboard for digital configuration and calibration zero and span.
• High accuracy D/A converter : 14 bits (1/16,000) resolution, 4-20mA and 0-10VDC
analog O/P.
• Parallel port printer interface.
• Easy to interface with P.L.C for batching plant or weighing control system application.
• RS-232 serial interface.
• RS-485 serial interface.
• Parallel printer interface.
• 4-20mA / 0-10 vdc analog o/p
• I/O interface
• B.C.D O/P interface
2. MULTI-FUNCTION DIGITAL INDICATOR
INPUT AND A/D CONVERSION
Art No HB-8211
Item No 01HB-D-WI002
Input Sensitivity 0.45 µ V/D ~ 100 µ V/D
Zero Adj. Range 0mV to 30mV
Load Cell Excitation 10VDC, 240mA ( Voltage Sensing), Drive 8 Load Cell ( 350) In Parallel
Input Impedance 10M Ω (Min)
A/D Conversion Method
A/D Resolution 24 Bits Over (10,000,000) counts
Temp. Coefficient Zero......± 0.2µ V/ ºC RTI
Span............± 15ppm / ºC of reading
DIGITAL SECTION
Weight Display 7 Segment LED Display Height
6 Digits, 0.52’’ (13.2MM)
Display Resolution 300 ~ 30000
Under Zero Indication Negative “-’’ Sign
Over Load Indication Input Signal > 30mV ‘’ - - - - - - ’’
Annunciators LED Lamps Ø 3MM Red Leds
Switches
- 6 Input Keys
- Zero, Tare, Tare Reset, Gross/Net, Func, Print.
- 0~9 Numerial Keys
Digital Set-up parameters Motion Detection, Zero Tracking, Decimal Point, Count By, Max. Capacities,
Digital Filter, Zero Range, Conversion Rate, Unit.
Calibration (F.D.A.C) Zero & Span Full Digital Calibration
Non-linearity ± 0.01% Of Full Scale
GENERAL
Real Panel
Load Cell Input, RS-232/RS485 x 1, RS-232 x 1, AC-Input, Power Switch,
Call. Sw.,Printer Port, 4-20mA / 0-10 A/O
Power Source 110 Or 220VAC 50 / 60Hz
Op. Temperature - 10ºC ~ + 50ºC
Max. Op. Humidity 85% Relative Humidity Or Less (Non-Condensing)
Dimensions (L x W x H) 228 x 192 x 84 (MM)
Weight Approximately 1.8KG
SPECIFICATIONS