2. Control Panel Videofied XT GPRS TECHNICAL SPECIFICATIO NS
Compatibility The XT GPRS works with all the following Videofied wireless devices: Stand-Alone Mode
In this Mode, the XT control panel works as standard hybrid alarm system with 25 wireless Videofied devices, 3 programmable Inputs
and 2 programmable outputs (outputs available Q1 2011).
It is a full stand-alone alarm system.
Indoor MotionViewer - Outdoor Badge Reader with Door Contacts - detect door Outdoor MotionViewer
integrated PIR motion Prox-Tag - Allowing Arming/ and window open/close activity. - integrated PIR motion
detector, night vision digital disarming of the system from An external input allows a wired detector, night vision digital
camera, infrared illuminators. outside the premices. The connection from standard camera, infrared illuminators.
MotionViewers detect intruders Prox-Tags are standard Mifare security switches and MotionViewers detect intruders
and capture a 10 second video badges. detection devices outputs. and capture a 10 second video of
of the intrusion which is sent to the intrusion which is sent to the
the panel over RF. panel over RF.
XTender Mode
In this Mode, the XT control panel works as an extension of your existing alarm system. It will enhance it to Videofied for video
verification and can also work as a GPRS cell- back-up.
Interior Sirens - provide status Exterior Sirens/Strobes - Smoke Sensor - enhances Remote Keyfobs - allow
beeps and alarm sounds provide alarm sounds and protection and uses advanced limited system operation
throughout the premises where visual identification of alarm detection technology. The and panic alarm
needed. site for responding authorities. Smoke Sensor is totally wireless capability in a portable,
and an integrated addition the convenient package.
whole security system.
Features
> Video Verification - video resolution of 320 x 240 pixels, 0 lux > 2 dedicated on-board connectors to extend the GPRS coverage
sensitivity, 5-frames per second for approx. 10 seconds total and the radio coverage
recording time. 220K MPEG file. > 4 Areas with 2 special arming mode and partitions
> Up to 25 Wireless zones/devices > 20 user codes or Badges
> Mapping feature to trigger a video upon activation of an event > On site configuration/Programming with the Keypad
or third party devices > 4.000 Events history log
> Panic Alarm Video verification > Multiple power option,12VDC with Alkaline batteries for back-
> Smoke Alarm Video verification up to 1 year or Lithium Batteries only for up to 4 years
> 3 programmable inputs for GPRS cell-back-up > Built-in GPRS transmitter to report to your Monitoring Station
> 2 programmable outputs (outputs available Q1 2011) to activate via the Frontel protocol
third party devices on site (smoke cloak, gates, lights, strobes,
sirens, etc...)