2. YOUR CITY
TITUS Modular Gasification System
Standardized Waste to Energy Processing Plant
Don’t have to start from Scratch
Produces Thermal and Electric Energy
Manufactured in North America
Start your Waste to Energy Project Today!
3. YOUR CITY
Modular Gasifier Primary Gasification
Modified Heavy Deisel
Gasifier Diesel Generator
• Process 5-50 tons of waste
• Medical, Municipal, Tires, Biomass,
• Batch Processing enables
• Modified heavy diesel engines
• Combined Syngas and Diesel
• Up to 51% electrical efficiency
• Higher with heat recovery
4. YOUR CITY
or PROJECTImplementation Plan
(to be confirmed through Analysis)
Equipment Procurement, Manufacture
(to be confirmed through Analysis)
Commissioning* 2 Months
Operations & Management Oversight Ongoing
Because TITUS uses a modular deployment strategy, many stages can be done
concurrently. Overall project timeline 6-8 months
5. YOUR CITY
or PROJECTGetting Started
1. Start Small Start Modular
2. Control Critical Success Factors
3. Avoid High First Cost
4. Generate Results
5. Manage Incremental Growth
6. YOUR CITY
Systems can be made to adapt to almost any location
Systems are designed for a 20+ year useful life
Systems can process 5-50+ tons per day
Two primary chambers provide continuous 24hr operation
Distributed systems avoid transportation costs
8. YOUR CITY
Two primary chambers maintain 24 hour syngas supply.
Feedstock is loaded via direct dump, conveyor, moving
floor, chain grate, or end loader.
The vessel is sealed and the batch process is ready to
Vessels are air tight; no smell, insect, rodent or bird activity
Syngas flows to a generator with advanced engine control
technology to optimize the syngas/diesel mix
Unsorted MSW is reduced about 95% in volume and about
82% in weight, 100% recycled.
Materials left (fine and inert ash, recyclables) are
recovered, processed, and sold.
9. YOUR CITY
Environment temperature is elevated in the syngas
generator by energizing its electric heating array.
Internal temperature of vessel reaches 800-1200°F.,
depending on waste, in approximately 1-2 hours.
Air supply is modulated to optimize gasification process.
The gasification event begins producing a flow of
combustible gas vapor (“syngas” – CH4, CO, H2, etc.)
The syngas is sent to a condenser then to a generator
Engines are computerized to compensate for fluctuations
in energy content, supplementing either biodiesel or diesel.
The engine heat, exhaust, and excess syngas flows to the
secondary gas processor at 1600°F to recover thermal
energy and complete combustion.
10. YOUR CITY
The generating sets produce electrical energy for local
consumption or sent to the power grid.
Thermal energy can produce hot water, distilled water, low/high-
pressure steam, absorption chiller refrigeration, product drying
heat, and other products for communities, greenhouses, fish
farms, and other agricultural and industry applications.
The syngas can be used to produce bio-fuels, bio-chemicals, other
bio-products, and CO2 for greenhouses.
The amount and value of products produced is dependent on the
type and throughput of feedstock.
Extracting Valuable Resources
11. YOUR CITY
TPD #s/Hr Steam #s/Hr Hot Water Gal/Day Electric kW/Hr
5 417 790 32,000 94
10 833 1,580 64,000 188
100 8,333 15,700 648,000 1,800
5 417 1,580 64,000 188
10 833 3,160 128,000 375
100 8,333 31,570 1,290,000 3,750
5 417 3,160 129,000 375
10 833 6,300 258,000 750
100 8,333 63,000 2,580,000 7,500
Typical Energy Production*
12. YOUR CITY
Modular Waste To Energy is the most
economical, environmental and sustainable
solution available to communities.
Let us help you get started today.
For more information contact: