Puma5 is an integrated engineering IT suite that supports all the activities of the piping discipline, managing the line list, piping specification development, material management up to the generation of material requisitions.
Puma5 guarantees the integrity of data improving the overall quality of the project execution, reducing the impact of costs and the delay of the schedule; Puma5 has been designed on the requirements of the major EPC contractors.
6. 6
is an
Created to support all the activities of the piping discipline
Managing
Line list
Process data
Piping specification developement
Material management up to the generation of Material Requisitions
3D CAD interfaces
Material Requisitions for the procurement
9. 9
define:
The charateristics of the components the piping specifications
related to
Editing is very quick thanks to the
Piping Classes
(Component Catalogue)
List of the project
piping components
Material Take-Off
From:
Puma5 automatically
creates
Used to carry out
10. 10
define components for line intersections between headers and branches
Puma5 will automatically provide the necessary component details from the piping
classes connected to the branch tables
(vent, drains and all the piping typical details) can be managed and used
in the Material Take-Off.
11. 11
Thanks to a friendly User-Interface allows the User to select components directly from:
- Piping classes template
- 3D Model
12. 12
are automatically calculated by Puma5.
are automatically generated from the bill of materials
list.
the quantities of materials can be automatically increased using
convenient surplus rules.
13. 13
A powerful reporting engine outputs (either PDF, Excel, CSV)
the quantities to be purchased.
is an highly valuable and unique module
Painting cycles and insulation specifications can be defined by the User.
Puma5 automatically computes the required insulation and painting materials.
14. 14
Puma5 can produce the
- the dimensional data
- the piping specs
- the accessories tables
complete with
Needed by 3D modelers in
order to be ready for
modeling.
3D modelers directly supported are:
Intergraph® PDS™
Aveva® PDMS™
Bentley® AutoPLANT™
Unigraphics® NX™,
15. 15
can be integrated with
PUMA5 ELENA
3D CAD Interface
In order to support a variety of other 3D CAD systems.