1. Sr. PDMS Piping Designer
HEMANT S. GURAV
* Address for Communication:
1/104, Sanskruti Co-Op. Hsg. Soc. Narayan Mill Lane,
Opp. Peninsula Corporate Park, Lower Parel West, Maharashtra, India.
Contact Cell +91 9869197380
Date of Birth: 07 April 1974
Passport Details: Z2202093 (Valid up to 15th
June 2021)
1 Education Qualification :
 Passed S.S.C. examination with Technical subjects, 1989.
1 Technical Qualification :
 I.T.I. `Mechanical Draftsman’ Bombay Technical School of Engineering, 1991.
 AutoCAD Academy of Technicians, 1992.
 Piping Draftsman Academy Of Technicians, 1993
1 Specific Technical Trainings:
 PDMS (Plant Design & Management System) Training received from Uhde India Ltd.
 MDS Pipe Support Module Training from Jacobs Engineering India Pvt. Ltd.
 PDS (Plant Design System) Training from Jacobs Engineering India Pvt. Ltd.
 CadWork Pipe 3.2 from Petrofac International Ltd. Sharjah, UAE.
 Isketch (alias) from Foster Wheeler E&C Malaysia.
 NIOSH PETRONAS Safety Training from Malaysian Refinery Co. (PETRONAS-Melaka).
1 Summary of experience:
 I have 18 (+) years’ experience working for major Engineering Consultants and EPC Companies.
Experience includes design of piping systems for Offshore Platforms and Onshore facilities, Refinery,
Chemical & Petro Chemical plants etc. Experience included a large number of oil and gas projects
involving extensive tie-ins, modifications and new facilities. Feed Conceptual or Detail Engineering
Equipment Layout Process Platform.
Able to work within design team to produce all Piping Deliverables for a 3D multidiscipline design
model in compliance with all relevant design codes, procedures and guidelines observing all client
requirements regarding Safety, operability, Accessibility, Maintainability, Material handling and
Constructability.
1 Piping Activities:
 Overall Area design and drafting activities for projects and proposal. Piping Material Take-Off for
proposal
 Prepare plot plan, equipment layout, piping plan & Nozzle orientation. Coordinate with other
engineering disciplines on solutions to technical irregularities.
 Checking of plot plans, Equipment layouts, Piping GAD’s, Piping Isometric drawings, Pipe supports
for final layouts and drawing for installation and constructions. Provide clarifications, guidance and
technical support to construction. Design changes and alternations based on Design Change Notices
(DCN’s) when required.

2.  Perform layout clash/interface check and take corrective action in coordination with other engineering
discipline.
 Review/comments vendor data and structural/civil drawings to ensure its suitability.
 Prepare inputs for civil/structural engineering including of rack locations, foundations, access
platforms, Special pipe supports, structures for elevated equipment and other piping layout
requirements.
 Piping, Equipment, Structure modelling on PDMS/PDS and able to utilize PDMS Draft for drawing
production
 Selection & Designing of suitable pipe supports as per pipe support standard and Stress marked-up
isometrics in the use of MDS along with other company supplied pipe support modelling tools.
 Experienced with Inter discipline communication for clash management and overall area design
integrity.
 Prepare “AS-Built” Drawings (plot plans/equipment layouts) following completion of construction
activities.
 Attain Vendor kick of meetings, Model Review.
Career Summary:
1 PDMS-Sr. Piping Designer, Technip India Limited Mumbai India from October 2015 till date
Job Responsibilities:
Umm Lulu Development Project Adma-Opco / NPCC, Abu Dhabi
Responsible for Piping Modelling, Piping modification/study, Support modelling. Preparation & checking of
IFC Isometric, piping support sketches coordination with stress group. Using MDS application for
preparation and checking of support sketches in PDMS.
1 PDMS-Sr. Piping Designer, Aker Solutions Kuala Lumpur, Malaysia: from July 2011 to July 2015
Job Responsibilities:
Gina Krog Topside EPCH Field Development Project Statoil / DSME, North Sea Norway
Overall responsible for Utility Module as per assigned. Detail Design Engineering and Piping route study
for finalization Equipment considering Material Handling & working environment using NORSOK.
Assigned work to designer team.
Cendor Phase-2 FPSO Project, Petrofac / MMHE, Malaysia
Overall responsible module Crude Stabilization and Gas system study and Equipment’s modelling and
pipe routing.
GSPC Topside EPCH, ONGC / Larsen & Toubro (L&T), India
Responsible for checking the isometrics and piping GA.
1 PDS-Sr. Piping Designer, Petrofac Engineering India Pvt. Ltd. Mumbai, India: from June 2009 to
June 2011.
Job Responsibilities:
Abu Dhabi Company for onshore Oil Operations (ADCO) – ASAB Project. (CDS) Central degassing
unit Separation area piping design & piping modelling, MTO and all other PDS activities include
equipment modelling. Stress & Fabrication Isometric extraction. Checking clash report, support error
report & segment data error, Design Review of 3D models in NavisWorks. Extraction of piping general
arrangement drawings.
1 Sr. Piping Designer, Foster Wheeler E&C Malaysia, Melaka, Malaysia: from July 2007 to March 2009.
Job Responsibilities:
Malaysian Refinery Co. PSR-2 Revamp Project, Responsible for Project execution for Crude Distillation
Unit (CDU) & Vacuum Distillation Unit (VDU). Finalizing the Tie-in points with the help of process in

3. existing plant, Site visit to verify Tie-in locations. Design development of Piping, Preparation of Plot Plans,
Equipment layouts & Piping GA Drawings. Design review of piping layouts with client & inter office. Model
piping in Isketch (alias) and extract Stress & Fabrication isometrics, Checking Isometrics and issue for
construction, Pipe supports details, Interface checking, Squad checks of Structural & Mechanical
Drawings.
1 Sr. Piping Designer, Petrofac International Ltd. Sharjah, UAE: from Sept 2005 to June 2007.
Job Responsibilities:
Kuwait Oil Company (Facility upgrade & relocation of U/G Process piping). Piping Designer with team of
designers & engineers carrying out detailed design. Development of piping layouts, Finalizing Tie-in
points in existing plant and verify Tie-in locations with site peoples. Prepare Tie-in isometric sketches,
Interface checking, Squad check of Civil & Structural drawing. 3D Modelling of Piping, Equipment & Pipe
supports in PDMS, Checking consistency and resolving clashes, Generate various reports in PDMS,
Stress and fabrication isometric extraction, Prepare Piping layout drawings using PDMS 2D draft.
1 Piping Designer, Jacobs Engineering India Pvt. Ltd. Mumbai, India: from Aug. 2004 to Aug. 2005
Job Responsibilities:
Low Sulphur Gasoline project (FHR)-Pine Bend. Piping design checker my responsibilities include
checking of equipment vendor drawing, checking of isometrics in SPR (Smart plant Review) for IFC issue
with respect to 3D model.
Heating Oil Upgrade project-Exxon Mobil. Design and 3D modelling of Piping, Equipment & Pipe
supports in PDMS according to modular concept, checking consistency and resolving clashes. Generate
various reports in PDMS, Extract isometrics for IFC issue, Extract support sketches from PDMS.
1 Piping Designer, Uhde India Ltd. Mumbai, India: from Jan. 2003 to Aug. 2004.
Job Responsibilities:
Saudi Arabian Fertilizer Co. (SAFCO), Ammonia Urea Project, Design & 3D modelling of Piping,
Equipment & Pipe supports in PDMS, Checking consistency and resolving clashes, Generate various
reports in PDMS, Extract isometrics for IFC Issue. Prepare G.A. drawing in PDMS 2D draft.
1 Piping Designer, Aker Kvaerner Pvt. India Ltd. Mumbai, India: from Aug. 2001 to Dec. 2002.
Job Responsibilities:
Reliance Petroleum Limited (Multipurpose Chemical Terminals), Piping Designer with team of designers
& engineers carrying out detail design of Chemical Terminals. My responsibility include study piping,
Detailed of Piping, Pipe support, Interface checking, Squad check of Civil & Mechanical vendor drawing.
1 Piping Draftsman, National Methanol Co. (SABIC), Jubail, Saudi Arabia: from May1996 to May 2001.
Job Responsibilities:
MTBE & Methanol Plant, Detail engineering of projects & plant modification. Worked on shutdown
related jobs, which requires fast and precise job work sketches. My responsibilities under the direction of
project engineer shall design & draft the required modification/changes to the process plant and facilities
in accordance the plant engineering standard, specification and applicable local/internationals codes.
1 Piping Draftsman, Development Consultants Ltd. Navi Mumbai, India: from Aug. 1993 to May 1996.
Job Responsibilities:
 Nuclear Power Corporation of India (NPC)
 Mangalore Refinery & Petrochemicals Ltd.

4.  Reliance Industries Ltd. (RIL), Patalganga.
 PT. Indorama Synthetics, Indonesia.
Draftsman with team of draftsman & engineers carrying out detailed designing of Power Plants. My
responsibilities include design development of Piping layout, Stress isometrics for Indian Boiler
regulation (IBR) approval, Piping fabrication isometric, Pipe support drawings and material take off.
1 Mech./Piping Draftsman, Poseidon Engineering Consultants Ltd. Mumbai, India: from Jan. 1993 to
Aug 1993.
Job Responsibilities:
 Transpek Industries Ltd. (120 TPD Sulphuric Acid)
 Gujarat Sulphites Ltd (100 TPD Sulphuric Acid)
 Krishna Indchem Ltd. (120 TPD SSP plant)
 South Pacific Viscose, Indonesia.
Worked on Plot Plan & Equipment layout, P&I Diagrams, Piping layout, Isometrics, MTO & Pipe support
sketches, Fabrication drawings.