SC4 ROYAL SOFT PUTTY - Mastic très souple / Extra weiche spachtelmasse
ICR SPRINT F30 PLUS FILLER HS GREY - Fondo riempitivo bicomponente / 2K filler primer
1. Fondo bicomponente con alto potere riempitivo,
per ogni tipo di finitura.
Di facile applicazione su ogni tipo di supporto come
vecchie verniciature, stucchi vari, lamiere, vetroresina.
E’ di rapido essiccamento e facile da carteggiare.
Non assorbe e conferisce alle vernici di finitura
una brillantezza uniforme ed elevata.
Il valor limite di VOC, in accordo alla Normativa
2004/42, per questo prodotto appartenente
alla sottocategoria IIB(c) è 540 g/l.
Il VOC di questo prodotto pronto uso
è inferiore ai 540 g/l.
2K primer with high filling power for all types of finish.
Easy to apply on any type of base, such as old paint,
various fillers, metal sheet and fibreglass.
Fast drying and easy to sand. It is not absorbent and
gives topcoats a uniform, high gloss.
The EU limit for this product ( category IIB(c) )is 540 g/l.
The VOC of this product is below 540 g/l
F30 PLUS FILLER HS
GREY.
2K FILLER PRIMER.
F30 PLUS FILLER HS
GREY.
FONDO RIEMPITIVO 2K.
www.icrsprint.com
2. A) DESCRIPTION AND FIELDS OF APPLICATION:
2K primer with high filling power for all types of finish. Easy to apply
on any type of base, such as old paint, various fillers, metal sheet and
fibreglass. Fast drying and easy to sand. It is not absorbent and gives
topcoats a uniform, high gloss. The EU limit for this product ( category
IIB(c) )is 540 g/l. The VOC of this product is below 540 g/l.
B) TECHNICAL DATA:
Composition: Hydroxylated resins, pigments, mineral fillers and solvents
Specific weight: 1.630 ± 0,05 kg/l
Available colours: Light Grey
Safety data: See safety data sheet
C) SURFACE PREPARATION:
• Sheet metal, galvanized metal sheet, polyester laminates,
wood, polyester fillers, etc.
• Old topcoats including double layers
• Dry sand with P180-P220 paper
• Clean well the surface to be treated with V09 Antisil.
Make sure it is dry and free from silicone, wax, grease and
any extraneous material
D) CAUTIONS:
> Comply with the specified drying times between one coat and the next,
according to the specific dilution and temperature.
> To use the product as a sealant, dilute by 20% with thinner for
acrylic primers.
> Do not utilize the product at temperatures below 5°C.
> Store in a cool and dry place.
E) PROCESSING:
5:1 (13% by weight) with C31, C35, C36 potlife > 30’ at 20°C
3:1 (20% by weight) with C05 potlife > 30’ at 20°C
0-20% with D10-D11 thinner
50”-20” DIN 4 mm at 20°C
1,5-1,8 mm 2-4 bar
2-3 = 150-210 micron
3h at 20°C
20-30’ at 60°C
9-12’ at 1 mt
P320-P400
P600-P1000
F) TOOLS CLEANING:
> With nitro thinner.
G) RECOATING:
2k Acrylic and polyurethane Top coat
Water and solvent based Basecoat
Technical indications and advices are based on our own experiences.
We assure the perfect quality of products. However, being the utilization out of our
control, we assume no responsibility on the results obtained.
A) DESCRIZIONE E CAMPO D’IMPIEGO:
Fondo bicomponente con alto potere riempitivo, per ogni tipo di finitura.
Di facile applicazione su ogni tipo di supporto come vecchie verniciature,
stucchi vari, lamiere, vetroresina. E’ di rapido essiccamento e facile da
carteggiare. Non assorbe e conferisce alle vernici di finitura una brillan-
tezza uniforme ed elevata. Il valor limite di VOC, in accordo alla Norma-
tiva 2004/42, per questo prodotto appartenente alla sottocategoria IIB(c)
è 540 g/l. Il VOC di questo prodotto pronto uso è inferiore ai 540 g/l.
B) NOTE TECNICHE:
Composizione: Resine ossidrilate, pigmenti, cariche minerali e solventi
Peso specifico: 1,630 ± 0,050 kg/l
Colori disponibili: Grigio Chiaro
Dati di sicurezza: Fare riferimento alla scheda di sicurezza
C) PREPARAZIONE DEL SUPPORTO:
• Lamiera, lamiera zincata, laminati in poliesteri, legno,
stucchi poliestere, ecc.
• Vecchie finiture comprese quelle doppio strato
• Carteggiare con carta abrasiva P180-P220
• Pulire bene la superficie da trattare con Antisil V09 e
assicurarsi che sia asciutta e priva di silicone, cere, grassi
e sostanze estranee in genere
D) AVVERTENZE:
> Rispettare i tempi di appassimento tra una mano e l’altra a secondo
della diluizione e della temperatura.
> Per utilizzare il prodotto come isolante diluire al 20% con diluente per
fondi acrilici.
> Non utilizzare il prodotto a temperature inferiori a 5°C.
> Conservare in luogo fresco ed asciutto.
E) LAVORAZIONE CON CARTEGGIATURA:
5:1 (13% in peso) con C31,C35, C36 potlife > 30’ a 20°C.
3:1 (20% in peso) con C05 Potlife>30’ a 20°C
0-20% con diluente D10-D11
50”-20” DIN 4 mm a 20°C
1,5-1,8 mm 2-4 bar
2-3 = 150-210 micron
3h a 20°C
20-30’ a 60°C
9-12’ a 1 mt.
P320-P400
P600-P1000
F) PULIZIA DEGLI ATTREZZI:
> Con diluente nitro o da lavaggio.
G) PROSECUZIONE DELLA LAVORAZIONE:
Smalti di finitura bicomponenti
Smalti doppio strato a solvente
Smalti doppio strato ad acqua
Le informazioni tecniche ed i suggerimenti sono conformi a quanto risulta dalle nostre esperienze.
Noi assicuriamo la perfetta qualità del prodotto. Tuttavia, non essendo le condizioni di
utilizzo sotto il nostro controllo, non assumiamo nessuna responsabilità sui risultati ottenuti.
IT SCHEDA TECNICA F30
PLUS FILLER HS GREY
Fondo riempitivo bicomponente
PLUS FILLER HS GREY
2K filler primer
EN TECHNICAL SHEET F30
I.C.R. S.p.A. ITALIA - Reggio Emilia Tel. + 39/0522.517803 – Fax + 39/0522.514384 E-mail: info@icrsprint.it – www.icrsprint.com |
ICR SPRINT COATING UK LTD UK - London - T: 01278802011 E-mail: enquiries@icrsprint.co.uk www.icrsprint.com |
ICR SPRINT INC USA - Fall River - MA - T: 800 980 4071 E-mail: icrsprintusa@gmail.com www.icrsprint.com |
ICR Ibérica, S.A. SPAIN - Tel. +34/901 101 408 E-mail: info@icriberica.com www.icriberica.com