Sandpiper Pumps

IDEX Proprietary & Confidential

Industry Week’s Best Plant award 2012
Warren Rupp, Inc.
Mansfield, Ohio Plant,
Facility built in 1975

Sandpiper
Pumps
Standard
Duty
Heavy
Duty
Ball Valve
Type
Flap Valve
Type
Containment
Duty
Special
Duty

Metallic Pumps
• Bolted Design
• Center Ported
• Available Sizes: 1/2”, 1”, 1-1/2”, 2”, 3”, 4”
• MOC Options : Stainless Steel, Aluminum, Cast Iron, Alloy C
• Flow Rate: 0- 238GPM
• Maximum discharge Pressure – 125PSI
• Can Handle Solids up to 9.5mm in size.
• Ball Type Check Valves

Non-metallic Pumps
• Bolted Design
• Porting Option – Center, Side & Dual
• Available Sizes: 1/4”, 1/2”, 1”, 1-1/2”, 2”, 3”
• MOC Options : Polypropylene, Conductive Polypropylene, PVDF,
Conductive PVDF, Conductive Acetal
• Can Handle Solids up to 18mm in size.

Ball Valve Design:
• Bolted Design
• Bottom/Top/Side Porting Arrangement
• Available Sizes: 1”, 1-1/2”, 2”, 3”, 4”
• MOC Options : Stainless Steel, Aluminum, Cast Iron, Alloy C
• Can Handle Solids up to 22mm in size.

Flap Valve Design:
• Flap Type Check Valves
• Bolted Design
• Bottom Discharge Porting
Arrangement
• Available Sizes: 1”, 2”, 3”, 4”
• MOC Options : Stainless Steel,
Aluminum, Cast Iron
• Maximum discharge Pressure –
125PSI
• Can Handle Solids up to 80mm in
size.
Applications
• Slurries with large solids
• Dense slurries with high solids
content
• Ceramic slip
• Wastewater
• Waste Oil
• Fluids that settle or harden in the
pump
Best for handling slurries
with large solids up to
80mm/3”

• Available in both Metallic and
Non-metallic construction
• All bolted Design
• Available with Leak Detection system
• Spill containment
• Un-interrupted pumping
• No damage to pump, nearby equipment's
and operators
• No material loss or expensive spillage
cleaning operation
Best for handling aggressive,
hazardous and radioactive
liquids.

Special
Pumps
High
Pressure
Pumps
Submersible
Pumps
FDA
Compliant
Pumps
Mine/
Construction
Duty Pumps
UL
Pump
USDA
Pump
Natural
Gas
Operated

Single Diaphragm High Pressure Pumps:
• Metallic construction - Aluminum, Cast Iron and
Stainless Steel
• Works on 2:1 principle i.e. Deliver discharge
pressure twice the inlet pressure, up to 17 bar.
• Designed for filter press feed and applications
requiring higher discharge pressure.
• Flow Rate – 62 GPM
• Maximum Solid size allowed:
For EH2-M, 6mm
For SH2-M, 50mm

• UL (Underwriters Laboratory) Pumps are designed to meet UL79 standards for
diaphragm pumps handling flammable liquids.
• All Aluminum construction with approved Nitrile or Virgin PTFE UL elastomers.
• Fully groundable to prevent static discharge.
• Available size – 1”
• Flow rate – 45 GPM
• Discharge Pressure – 8.6 bar
• Maximum Solid size allowed – 6mm

The PortaPump®
• Battery powered pump, operates
using any truck or car 12-volt battery.
• It comes equipped with cables and
battery clips.
• Extremely portable and can fit
through opening as small as 10”.
• Port size – 1½”
• Flow Rate – 43 GPM
• Maximum Solid size allowed – 1mm.
The SludgeMasterTM
• Air powered
• Designed to handle mud, leaves,
twigs, sand, sludge, trash-laden water
and soft solids to 1½“.
• High capacity, low head.
• Can fit through opening as small as
14”.
• Sturdy construction for rough
handling.
• Port Size – 3”
• Flow rate – 300 GPM
• Maximum Solid size allowed – 40mm.

• Specially designed to meet USDA (United States Department of Agriculture)
standards.
• Available with Electronic Leak Detection system.
• Wetted parts are of Electro-polished 316 and 302/304 Stainless steel.
• Non-wetted parts are electro-less nickel plated aluminum and polypropylene.
• Fitted with food grade white Nitrile elastomer.
• Available sizes – 1”, 1½”, 2”, 2½”
• Flow Rate – 0 to 150 GPM
• Maximum solid size allowed:
For Ball Valve Design - 6mm
For Flap Valve Design – 27.4mm

•Ideally suited for variety of food processing, pharmaceutical and cosmetic
industry applications.
• Available Sizes:
Ball Valve Design – 1” to 3”
Flap Valve Design – 2”
• Flow Rate – 0 to 235 GPM
•Constructed of FDA material compliant components
of Stainless Steel and FDA approved Santoprene, Nitrile
and PTFE elastomers.
•Standard non-wetted components are white epoxy
coated aluminum with stainless steel hardware.

• Certified by CSA for sweet and Sour natural gas operated diaphragm pumps.
• Size : ½ ” to 3”
• Ball check valves.
• Flows upto 889 liters.
• Solids upto 6mm.
• Fully grounded design.
• ESADS+Plus.
• In-line serviceable.
Applications :
Crude Oil, Salt Water, Drilling Mud, Condensate,
Lubrication Oils, Glycol, Caustic liquids and Acids

Applications :
• Sump Transfer
• Muck/Slimes/Slurry transfer
• Drift Dewatering
• Drillers Mud
• Dewater High/Low PH Levels Underground

 ATEX (Explosive Atmosphere)
 FDA (Food and Drug Administration)
 CE (Conformité Européenne)
 CSA (Canadian Standards Association)
 UL (Underwriters Laboratories)
 USDA (United States Department of Agriculture)
 ABS (American Bureau of Shipping)

 Reduce air consumption up to 50%
 Automatically adapts to process conditions
 Powered only by compressed air – No batteries
 Increases productivity
 Reduce compressor maintenance
 Optimizes energy and performance

Step 1:
• Air enters main inlet
• Small amount of air directed to turbine
that powers unit
Step 2:
• Air Regulator Valve controls air flow volume
• Air continues on standard path through air
system
Step 3:
• Sensor monitors pump velocity, sends data to
microprocessor
• Microprocessor calculates ideal air usage,
regulates air valve

 Size – 2” & 3”
 Available in both metallic and non-metallic construction
 Any 2” & 3” standard and heavy duty pumps can be upgraded to AirVantage
 Flow Rate – 0 to 245 GPM

• Reduce Pulsation
• Reduce Leaking / Damage
• Reduce Manifold Stress
Use Flex Connections
primarily on larger
units 1 ½”, 2”, and 3”.

• No Lubrication Required
• Clean / Dry Air is a Plus
But Not Required.
Tip: Keeping the muffler
clean will improve
pump performance. A
dirty muffler can lead
to stalling.

• Thermal Expansion
• Positive Inlet Pressure
• Head Pressure
“The Windows to Pump Performance”

Leak DetectionFilter/Regulator Stroke counter/Batch control
Level ControllersSurge suppressors Air Dryer

 Skid systems
 High pressure, filter press feed systems
 Mobile skid systems
 Custom environmental protection
packaging
 Heat jacket systems

Sandpiper Mobile app
 My Pump Details
 Chemical Compatibility Guide
 Full line catalogs
 Service & training videos
http://www.sandpiperpump.com/mobile_app.asp

Quality Assurance

 Assembly cycle testing with hold pressure vacuum
readings (standard)
 Certified one-point head capacity tests
 Certified additional points
 Dry lift testing
 Hydro/pneumatic testing 90 psi (standard)
 Hydro/pneumatic 1½ times maximum operating
pressure
 Pump repair (labor only)
AODD Project Capabilities
Service Description

 Certificate of origin
 Certificate of conformance (Pump)
 Standard non-certified dimensional outlines (to order
contact Application Engineering)
 Certified dimensional outlines
 Material test reports (MTR)
 Certificate of compliance (Material)
 Epoxy, water based, two part (exterior only
 Customer specific
 PTFE
 Halar
 Nickel plating midsection
 Custom and Engineered products and system to meet
your application
 Custom product dimensional outlines
Service Description

 Four (4) lines, maximum 24 letters
 Custom Nameplate
 PMI (Positive material identification
 Hardness testing
 Liquid penetrant testing
 Radiographic testing
 Magnetic particle testing
 Other
 Impact test
 Seismic test
 Sound test
 Other
Service Description

http://www.idexindia.in/sandpiper-pump/

Savli, Vadodara
IDEX Fluid & Metering – Manufacturing facility
SandPiper AODD Pumps in India

IFMT - AODD Value Stream

Our Contacts
Manufacturing Facilities:
SANDPIPER Pump
800 North Main Street
Mansfield, Ohio 44902 USA
Tel: +1 (419) 524-8388
Fax: +1 (419) 522-786
IDEX Fluid & Metering Pvt. Ltd.
Survey No. 256, GIDC Manjusar, Savli
Near Bombardier Circle,
Distr. Vadodara 391770, India
Tel: +91-2667-662-001
Sales & Support
SandPiper Pump - Mumbai
S 14, First floor
Solitaire Corporate Park, 167, Guru Hargovindji Marg,
Chakala,
Andheri (East), Mumbai 400 093
Tel: +91-22 6643-5552/5555
Email: info.fmt@idexcorp.com
SandPiper Pump - Delhi
4th flr, Office No. 801 Statesman House, Barakhamba
Road Connaught Place
New Delhi 110001
Tel: +91-11-3044-6482
SandPiper Pump - Chennai
The Executive Centre, Tamarai Tech Park Level 5,
S.P.Plot No.16-19 & 20-A,
Thiru Vi Ka Industrial Estate, Inner Ring Road, Guindy,
Chennai 600032, India
Tel: +91 44 6693 6630

Sandpiper Pumps

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (19)

Similaire à Sandpiper Pumps

Similaire à Sandpiper Pumps (20)

Dernier

Dernier (20)

Sandpiper Pumps