S.E.E an organization started in the year 2011 is a growing organization which serves more than 100 customers to become renowned & established brand in the field of gauges. We are the leading organization in Designing and manufacturing of special gauge (Relation gauge; acceptance gauge) where in we provide the most simple and cost effective solution to your toughest problems.

1. S EXPERT ENGINEERS
Simple & Cost Effective solution to Tough Problem In Measurements

2. ABOUT US
 S.E.E an organization started in the year 2011 is a growing organization
which serves more than 100 customers to become renowned &
established brand in the field of gauges.
 We are the leading organization in Designing and manufacturing of
special gauge (Relation gauge; acceptance gauge) where in we provide
the most simple and cost effective solution to your toughest problems.
Apart from Special gauge we have the strength to provide Standard
gauge like
 Plug gauge
 Snap gauge
 Ring gauge and many more in steel and carbide.

3. This team is driven by
 Partner Rohan Mehta young Mechanical engineer
 Post Graduated from Indo-German Tool Room
 Two years Experience in Tooling industries and
 Partner S.P.Kothari B.E-Mechanical in 1974
 16 years of experience in precision industries like bearing and gauge
manufacturing
 20 years in manufacturing gauges as Partner.
 S.E.E has a highly dedicated team patronized by Experience thus
providing a platform to grow as both individual and as a team.

4. UNIVERSAL COMPARATOR
A Universal Dial type of gauge where in the Outer Diameter, Inner Diameter,
Concentric, run-out, lobbing, etc can be checked for various sizes

5. VERTICAL COMPARATOR STAND
A Universal Dial type of gauge to check Groove height, length,
Groove center-axis, hole–center /axis

6. RELATION GAUGES
Designed to check Hole drilled at angle to the flat face

7. WIDTH GAUGE
Working principle is same as that of plug gauge; these
gauges are suggested for those jobs in which the groove or
slot in the component are to be checked.

8. SNAP GAUGE
A correctly machined part will pass the first set of jaws and stop at the second
— end of test. In this manner a part may be checked in one action, unlike the
plug gauge that needs to be used twice and flipped to access the second gauge.

9. RING GAUGE
Ring Gauge working principle is same as that of snap gauge; these gauges are
suggested for those jobs in which the center less machining is done where the
problem of lobbing is generally observed and where close tolerance are present.

10. ACCEPTANCE GAUGE
It is a special gauge where in two or more than two parameters can be
checked simultaneously; which will indicate only OK condition.

11. INCLINE COMPARATOR
A Universal Dial type of gauge where in the Outer Diameter, Inner Diameter,
Concentricity, run-out, lobbing, etc can be checked for various sizes.

12. CONTACT US
S EXPERT ENGINEERS
 Company Type: Manufacturer
 Contact Person: Mr. Satish Kothari
 Mobile No 9225317248
 Concern Person: Mr. Rohan Mehta
 Concern Person No: 7755918690
 Phone: +91 0240 2553318
 Visit: http://seegauges.com
 Address: K-122/2, First Floor, MIDC Waluj, Aurangabad-431136
 Area: Waluj MIDC Aurangabad
 City: Aurangabad MH