Recommandé
Recommandé
Contenu connexe
Dernier
Dernier (20)
En vedette
En vedette (20)
Street Print Xd Dahlonega
- 1. Area has already been stamped. Thermoplastic is laid on the surface. Material is cut so seams are melted
- 2. Sand is blown on surface with a hopper gun. Sand acts as a release agent to prevent post stamp template from sticking. Also provides friction.
- 3. While the thermoplastic is still warm, the area is stamped a 2 nd time with a slightly smaller diameter template. This post stamping give you the nice sharp grout lines.
- 4. Finished crosswalk. Excess sand will wear off shortly.
- 5. Another view of finished crosswalk.