1. Folie 1

2. Construction of the LISA-10

3. Technical Data
LiSA 10:
• 32 Bit Microcontroller.
• 64 kB RAM Memory.
• 1024 KB Parameter Memory (EEprom)
(pre- 2003 512kB).
• Real time Clock.
• 4 serial ports. (Group connection, PC-Connection,
Connection to Car, DCP)
• KeyBoard-Display
• Electronic Monitoring
• Controll relays for external outputs along with 2 built in free
programable.

5. IO – Board (IO16)
IO Board IO16

6. Folie 6
Car Electronics
APO12
APO 12 LBM 09

7. LiSA-Bus-Driver (LBD-02)

8. LiSA BUS Example with Ind Open

9. Results of Shaft Learn
Slow down in Pulse operation is recorded from the shaft switch
activation and pulses from encoder.
:
gggggggggg
Max deceleration is
calculated from VO/VU

10. Floor level Adjustment (002)
Adjustment from LiSA-10 (002) Deceleration Up/Dn or Step
Correction 002
Lift stop 15 mm low in the up
direction
Adjustment in 002

11. Step Correction Example
Example 1 using Step Correction:
The lift approaches the 2nd
floor in the up direction and
stops 8mm high.
• To adjust the level we must
adjust “STEP CORRECTION –
UP TO LANDING 2.

12. Ride Quality using Multi Speed
LiSA-10 Multi Speed Commands.

13. General Elevator Parameters
General elevator Times
Travel Time / Impulses
Inputs Addresses
Outputs addresses
Key Addresses
Relay Addresses
Display Functions
Door Open Function
Learning Travel Values
Special Parameter