1. CURRICULAMVITAE
KARTHIK.D
Permanent Address: Contact Details:
Karthik.D, Email: karthikdakshna@gmail.com
M I G: 643, Nethaji Nagar Mobile No.: 9944217590 / 9751842162
New Housing Unit
R.S.G College Post
Thanjavur District
Tamilnadu. PIN Code: 613 005.
OBJECTIVE:
My objective is to obtain a position in a professional office environment where my skills are valued
and can benefit the organization. Ideally, I wish to have a focus in my electrical field for a growing
organization & preferably dealing in MAXIMO Asset Management is a comprehensive solution for
managing the physical assets on a common platform in an asset-intensive industry.
It offers “built in” mobile access, out-of-the box mapping, crew management and analytical insight.
MAXIMO Asset Management allows organizations to share and enforce best practices, inventory,
resources and personnel. It helps manage all types of assets – including plant, production,
infrastructure, facilities, transportation and communications.
It is available as an on-premises or software-as-a-service (SaaS) offering.
EDUCATIONQUALIFICATION:
I) Diploma in Electronic Engineering from 2002 - 2005.
II) BE in Electrical & Electronics Engineering from 2008 - 2011.
2. WORKINGEXPERIANCE:
I) Total 6 Year & 3 Months Experience.
II) Active Engineering Flock Machine Manufacturing from 2005- 2008.
III) Meclellan Integrated Service from 14.02.2012 – 28.06.2012. ( FORD Site Chennai )
IV) SODEXO Technical Services from 13.08.2012 – 05.08.2015. ( FORD Site Chennai )
V) GSH Group of INDIA Technical Services From 05.11.2015 – Till Date
( INDIA Site : FORD, SANAND Ahmadabad , Gujarat.
KEY SKILLS & ROLL:
Active Engineering
1. Flock Machine Manufacturing& Assistant Engineer
Combined cycle power plant in active engineering.
Meclellan Integrated Facility Management Service (p) Ltd. Multi Task Engineer
FORD SITE Chennai Plant.
2. Total Equipment Maintenance.
(Area: Sub Station, Body shop, Stamping & Blanking).
Preventive Maintenance,Corrective Maintenance,
Emergency Maintenance & Predictive Maintenance.
For testing of Motorized and Pneumatic operatedMechanism.
3. a) Extra High VoltageSwitch gear, Isolators, CT& CVT
(Siemens & BHEL make) 220 KV & 400 KV Switch Yard.
b) Alternator PM&CM.
c) Transformer PM and testing up 300 MVA.
d) HT Motor PM & Testing.
e) Robot crane PM&CM.
f) Basic Knowledge of UPS.
g) Basic Knowledge of VFD.
h) Basic Knowledge of PLC, SCADA & DCS.
i) Good knowledge about electrical protection and scheme check.
j) PM of Battery bank & Battery Charger.
k) Heat Tracing in MCCB & RCCB Protection up to 33 KV.
l) Conveyors, Vertical Drop Lifter, Lift Table, Turn Table, Transfer Car,Pallet Wash Pump, 320 &
62.5 KV DG, Power Distribution systems,Overhead lines like BBT & Motor Drives.
SODEXO Technical Service (p) Ltd. TEM & CADD Engineer
FORD SITE Chennai Plant.
3. Total Equipment Management& Drawing Management System.
(Area: Plant Engineering)Type: MAXIMO / Version: 6.2 / 7.5 / Software: IBM
I) Preventive Maintenance – Maintenance to reduce Equipment Failure through reliability
Engineering Training.
II) Corrective Maintenance – Activities undertaken to detect, isolate, and rectify a fault so
that the failed equipment, machine, or system can be restored to its normal operating
condition. Related with preventive maintenance.
III) Emergency Maintenance - An unforeseen or sudden occurrence, especially of a danger,
Demanding immediate remedy or action.
IV) Predictive Maintenance techniques are designed to help determine the condition of in-
service equipment in order to predict when Maintenance should be performed. This
approach promises cost savings over routine or time-based preventive maintenance,
because tasks are performed only when warranted.
4. GSH GROUP OF INDIA (p) Ltd. MAXIMO CONTROLLER
FORD SITE, SANAND Ahmadabad Plant, Gujarat.
4. Client Service Request, Equipment Management Service & Drawing Management Service.
(Area: Plant Engineering)Type: MAXIMO / Version: 7.5 / Software: IBM
I) Preventive Maintenance – Maintenance to reduce Equipment Failure through reliability
Engineering Training.
II) Corrective Maintenance – Activities undertaken to detect, isolate, and rectify a fault so
that the failed equipment, machine, or system can be restored to its normal operating
condition. Related with preventive maintenance.
III) Emergency Maintenance - An unforeseen or sudden occurrence, especially of a danger,
Demanding immediate remedy or action.
IV) Predictive maintenance techniques are designed to help determine the condition of in-
service equipment in order to predict when maintenance should be performed. This
approach promises cost savings over routine or time-based preventive maintenance,
because tasks are performed only when warranted.
V) Help Desk Complaints/ Request Capture in MAXIMO Service Request.
PROCESS OF MAXIMO:
I) Generate PM and create job plan for equipment , How to prevent safely with cost less
II) To create the frequency to when the equipment maintain in number of days in cycle.
III) To create the sequence like Weekly, Monthly, Bi-Weekly, Bi-Monthly, Quarterly,
Half Yearly & Yearly Once to maintain the equipment.
IV) And Generate the Work Order with the procedure to do.
Status.
Work Order Description.
Location.
Service Address.
Scheduke Start and Finish Dates.
Work Type.
Priority.
Multiple assets and locations.
Tasks and Descripton.
Labor Assignment.
Planned Materials
Planned Tools.
5. Other Skills:
Havinggood communicationskill byknownlanguagesof EnglishandTamil & well knowledge about
industrial safety standards.
I am working in Paperless office concept by using software like Computer based indenting &
inventory control ,Photoshop, Corel draw, Graphic Designing, 3D – Animation Civil & Electrical CADD
Drawing Layouts.
Basic knowledge of first aid and contingency plan.
PERSONAL PROFILE:
MALE/MARRIED/INDIAN.
DOB: 04/02/1985.
PERSONAL TRAITS:
Easilyadaptable toworksituations,QuicklearnerandTeamWorker.
Abilitytoeasilygraspandadaptto fast changing technological trends.
Interpersonal andMotivationskills.