POST APPLIED FOR
Any Mechanical / Oil & Gas/ Energy/ Power /Operations and maintenance, WWTP project or industry
• Mechanical Engineer/Supervisor
• QA/QC Engineer/Supervisor
• NDT supervisor
Operations and maintenance, Piping Fabrication, Construction, waste water plane, steel structure, Mechanical , Piping Materials or Plumbing Superintendant , supervisor or Engineer
1. Page 1 of 24
POST APPLIED FOR -
Any Mechanical / Oil & Gas/ Energy/ Power /Operations and maintenance,
WWTP project or industry
Mechanical Engineer/Supervisor
QA/QC Engineer/Supervisor
NDT supervisor
Operations and maintenance, Piping Fabrication, Construction,
waste water plane, steel structure, Mechanical , Piping Materials or
Plumbing Superintendant , supervisor or Engineer
CERTIFICATIONS
Saudi ARAMCO SAP no: 70008511 As Piping QA/QC Inspector Saudi vitrified clay
pipe company LTD Training conducted by Quality control department
(EN ISO 9001:2000)
ASNT Level II – Radiographic Test(RT)
ASNT Level II – Magnetic Particle Test(MPT)
ASNT Level II – Dye Penetrant Test(DPT)
OPITO Approved Basic offshore Induction and Emergency Training (BOSIET) Conducted by
YKK in Atyrau Kazakhstan.
EDUCATIONAL QUALIFICATIONS
Diploma in Mechanical Engineering BTEB, Bangladesh
KEY SKILL
KEY SKILLS: Piping & Welding Inspection, Punch list and Hydro-Test coordinator ,
maintenance engineer, mechanical engineer, steel structural engineer, Radiographic
Interpretation
KAZI NAZMUL HAQUE
Isolux Corsan Bangladesh Ltd.
QA/QC Mechanical Engineer
E-mail:knhaquefg@yahoo.com
MOBILE: 008801913257553,
008801844000797 (COMP. MOBILE)
2. Page 2 of 24
Total years of Experience
15 years (oil & gas, power plant processing Industry and Levelling survey)
Overseas
Kingdom Saudi Arabic = 3.8 years
Republic of Kazakhstan = 1.9 years (offshore)
Abu Dhabi (UAE) = 1.8 years
Familiar with codes & Standards: ASME sec I, sec II, sec III, sec V, sec VIII, sec IX,
ANSI/ASME B31.1,B31.3,B31.4,B31.5,B31.8, ASTM CODE, AWS, API, Saudi Aramco and
International standards & codes for construction and Inspections.
Summary of Skills and Experience:
P&ID marking for test package preparation as per project designs Plan
Full knowledge with interpret the QCPs, ITPs, Project specifications, Materials, Oil
& Gas plants.
Implement/verify of ISO Standard Quality Management System.
Materials inspection & Review of material certificates and compliance as per project
specifications
Control and witness for the NDT.
Estimating material, construction, and labour costs, and project timescales
Involved in producing due diligence surveys
Liaising with local contractors
Load assessments of new and existing structures.
Giving PowerPoint presentations to managers and clients
Communicating with government agencies and local authorities
Evaluating, organizing & prioritizing work within the overall project schedule.
Preparing sketches, marking-up drawings and writing specifications etc
Liaising with architects, engineering technicians and IT staff.
Structural inspections/assessments and making appropriate recommendations
3. Page 3 of 24
Providing expert technical advice including structural reports, crack monitoring.
Witness & review the Mechanical destructive tests.
Utility piping systems
Wastewater sewers lines
Excavation and back filling
Textile mechanic (mechanical)
Internal and external coatings
Insulation purpose, type and thickness inspection
Valves installation inspection
Biocide and Ozone treatment inspection
Checking weld joint preparation, fit up, dimensional inspection and alignment
Review and familiarize with the project specifications, codes and standards
Visual inspections as per code requirement
Monitoring welding activities as per WPS
Conducting hydro test as per the requirement of Project
Conducting pneumatic test and Leak test as per requirement of Project
Line walk with client/PMC to achieve the Mechanical Completion Certificates
System wise line checking & raising punch, close coordination with sub-contractors
to arrange the required materials & equipment’s to complete the punches.
Prepare inspection reports and documentation as per client requirements.
Close coordination with other team members to short out the piping materials &
equipment’s and to clear the mutual punches.
Making daily progress reports & submitting to the Management.
Checking daily progress with Charge-hand & analysing the work to be complete on
time.
4. Page 4 of 24
EMPLOYMENT HISTORY:
01 September 2016 to until now
Employer : Isolux Corsan Bangladesh.
Designation : QA/QC Engineer Mechanical
Project : Siddhirgonj 335 MW Combined Cycle Power Plant Project
Client : Electricity Generation Company Of Bangladesh Ltd.
General Duties & Responsibilities:
Coordinate all site inspections with the site subcontractors
Ensure that all inspection reports are accurate and that all attached documents are
current status
Ensure all work is correctly prepared prior to any inspection being undertaken
Review all inspection reports for compliance
Assist the site QC manager in the organization, maintenance and control of the
quality system
Prepare nonconformance reports to the QA manager and assist in developing
corrective actions
Assist the QC manager and construction manager in resolving any discrepancies and
ambiguities
Coordinate with the customers QC inspectors for the resolution of site problems
Coordinate with the site subcontractors to ensure that communications exist and are
maintained
Assist the site subcontractors in the resolution of drawing interpretation
Attend the weekly QC meetings
Review work procedures and method statements for compliance with good work
practices and the customers contract specializations
The issuance of nonconformance reports in conjunction with the site QC manager
The completion of QC site instructions and coordinate their closure The review of
inspection test packages during the course of construction activities
Compliance with the site's health and safety regulations
Review course and effects of welding defects and take remedial actions
Coordination with the field subcontractors and the Third Party NDT Inspection
Company
5. Page 5 of 24
Review of the radiographic film and all NDT reports on a daily basis
Reviewing the inspection and testing methods and procedures for Radiographic, Dye
Penetrant, Magnetic Particle, and Ultrasonic inspections
Witnessing of welder qualifications testing and procedures qualification testing
Reviewing of the welding summery reports
Checking the hydrostatic test packages for NDT compliance prior to testing
Recording and listing of defective welds
Monitor the control and issue of welding electrodes
Actively monitor site radiation safety
Review day to day applications for x-raying of welds
Coordinate the issue of nonconformance reports through the site QC manager
Compete site quality instructions to sub-contractors when required
01 November 2015 to 31 August 2016
Employer : Technice construction Company Ltd.
Designation : QA/QC Engineer
General Duties & Responsibilities:
Implement and verify of ISO Standard Quality Management System.
Estimating material, construction, and labour costs, and project timescales
Liaising with local contractors
Load assessments of new and existing structures.
Communicating with government agencies and local authorities
Evaluating, organizing & prioritizing work within the overall project schedule.
Preparing sketches, marking-up drawings and writing specifications etc
Liaising with architects, engineering technicians and IT staff.
6. Page 6 of 24
01 February 2016:
Project : Moheshkhali - Anowara Gas Transmission Pipeline Project
(30”ODx91Km) Section: B
Client : GAS TRANSMISSION COMPANY LIMITED (GTCL)
CONTRACTOR : TECHNICE CONSTRUCTION COMPANY LTD.
Project Duties & Responsibilities:
Preparing Welding Procedure Specification (WPS) For Mainline ,Tie & Repair As per
API 1104, ASME Sec IX & GTCL Specification
Preparing Procedure Qualification Record (PQR) & Welder Qualification Record (WQR)
base on Welding Procedure Specification (WPS )Mainline Works With Internal Clamp
and Tie in External clamp
Materials ( API 5L Gr. X60 PSL 2 ) inspection & Review as per project specifications
Monitoring welding activities as per WPS
Prepare and submit daily welding report, Tie in report, weld joints Repair reports and
documentation as per client requirements.
Monitoring all NDT activities , radiographic interpretation as per API 1104 and client
procedure
Communicating with client, Sub-contractor, NDT techniques (crawler and gamma
ray ir-192 ) and local authorities
Daily progress reports submitting ( sent by message or email ) to the company & client
Management
05 March 2015 to 15 June 2015
Employer : TUV Rheinland Bangladesh Pvt. Ltd.
Designation : Third party Inspector Mechanical
Project : SHAHJALAL Fertilizer Project Fenchuganj, Sylhet, Bangladesh
Client : Bangladesh Chemical IndustriesCorportaion (BCIC)
Duties & Responsibilities:
Review of mill test report or certificates.
Review of drawing, calculations, PQR, WPS, and PWHT
Mechanical and technological testing of materials at the material manufacturer, mill
etc.
7. Page 7 of 24
In-process inspection and onsite inspection of steel structures (e.g. construction of
large halls, bridges)
Quality inspection of technical components, acceptance tests, performance tests
Prepare inspection reports and documentation
Safety and Health Protection Coordinator
Issue Non-Conformance Reports (NCR) for violations and investigate the reason of non-
conforming items, and initiate corrective actions to prevent recurrence of
nonconformities.
Inspection certificate of acceptance or compliance with code to be issued to vendor
Close coordination with other team members to short out the piping materials &
equipment’s and to clear the mutual punches
05 September 2013 to 09 may 2014
Employer : GS NEOTEK
Contractor : DAEWOO E & C
Designation : QA/QC ENGINEER
Project : RUWAIS Refinery expansion project,(Storage tanks blending system unit)
Client : TAKREER EPC-4
Duties & Responsibilities:
Test package prepared as per cline approval marking P&ID
Review the test package, documentation ,ISO DWG,P&ID and NDT history sheet as per project
requirement
Co-ordination the inspection, surveillance and testing requirements are done on behalf of the QC Section
Head with the Client (TAKREER)
Prepared the documentation to meets the requirements of the Project Quality Plan
Ensure that the documentation, Request for inspection (RFI), Checklists, test pack and surveillance meets
the requirements of the Project Quality Plan.
Issue Non-Conformance Reports (NCR) for violations and investigate the reason of non-conforming
items, and initiate corrective actions to prevent recurrence of nonconformities.
Communicating with All department’s
04 August 2012 to 05 September 2013
Employer : GS NEOTEK
Contractor : G.S Engineering & construction
8. Page 8 of 24
Designation : QA/QC supervisor
Project : RUWAIS Refinery expansion project, (Alkylation unit & Olefins
Conversion unit) RRE 2
Client : TAKREER
Duties & Responsibilities:
P&ID marking for test package preparation as per project designs Plan.
Co-ordination the inspection, surveillance and testing requirements are done on behalf of the QC
Section Head with the Client (TAKREER)
Prepared the documentation to meets the requirements of the Project Quality Plan
Test package prepared as per cline approval marking P&ID
Review the test package, documentation ,ISO DWG,P&ID and NDT history sheet as per project
requirement
Ensure that the documentation, Notification for Inspection (N.I), Checklists, test pack and surveillance
meets the requirements of the Project Quality Plan.
16june-2010 to 05 may 2012
Employer : CONSOLIDATED CONTRACTORS COMPANY (CCC) W.L.L.
Designation : QC-Inspector (piping, steel structural, NDT, test packs)
Project : Hook- up pre commissioning assistance
(AGIP KCO-ENI Offshore Project)
Client : AGIP Kazakhstan north Caspian operating company (N.V.)
Atyrau, Republic of Kazakhstan
Duties & Responsibilities:
To perform all types of piping, material, fabrication and erection inspection
NDT Radiographic inspection
steel structure inspection as per Inspection Test plan (ITP)
Ensure that the documentation, Request for Inspection (RFI), Checklists, test pack and surveillance meets
the requirements of the Project Quality Plan.
Equipment Inspection (RFI), Checklists and ensure the ITR meet the requirements of the Project Quality
Plan.
9. Page 9 of 24
Ensure all activities carried out by subordinates are performed in accordance with company
or client safety rules – men working are wearing protective clothing and using required safety
equipments
16August 2007 to 16- june-2010
Employer : CONSOLIDATED CONTRACTORS COMPANY (CCC) W.L.L. KSA
Designation : QC-Inspector Piping (Approved By Saudi Aramco)
Present Position : Test pack & hydro test coordinator
Project : Khursaniyah Gas Plant Project
Client : Saudi Aramco
Contractor : Bechtel & Technip Joint Venture
Saudi Armco SAP # 70008511
Duties & Responsibilities
To ensure the construction activities in compliance with Saudi Aramco Standards and other International
Codes and standards, such as ANSI/ASME, ASTM, API, etc.
To perform all types of piping inspection as per Inspection and Test plan (ITP)
Co-ordination, inspection and test requirements are done on behalf of the QC Section Head with the
Client (Saudi Aramco)
Complete relevant forms and prepare Request for Inspection (RFI), Checklists, reports on inspections and
test undertaken for the conclusion in and inspection records.
Issue Non-Conformance Reports (NCR) for violations and investigate the reason of non-conforming items,
and initiate corrective actions to prevent recurrence of nonconformities.
Ensure that the documentation, Request for Inspection (RFI), Checklists, test pack and surveillance meets
the requirements of the Project Quality Plan.
Piping material inspection, fabrication and erection
Final punch listing, Test packs preparation for Hydro testing inspection.
Biocide and Ozone treatment inspection
Reinstatement and Bolt Torque inspection
05 May2006 31July 2007
Employer : SINHA TEXTILE GROUP, SONARGAO, NARAYANGONJ
Position : Sub Assistant Engineer
10. Page 10 of 24
Department : Mechanical Department
Duties & Responsibilities:
Maintenance of dyeing Machine, Hydro Extractor Machine, R.F Dryer Machine, Press Machine,
Soft winder Machine, Random winder machine, cranes etc.
Operation of various machines and tools in workshop with safety
26JUNE 2005 to 28th June2006
Employer : waste water Electric al (W.W.E Malaysia)
Position : Forman
Project : Wastewater sewers line Project K.S.A
Contractor : Civil Works Company
Duties & Responsibilities:
Excavation level, pipeline level check (by dumpy level)
Pipe laying and fixing as per ISO
Manhole inspection procedure as per drawing
Manhole backdrop inspection as per drawing
Presser testing pipelines (water and air) as per standard (SVCP Procedure).
Equipment side safety and environment procedure
20thNovember 2001 to 1th September2003
Employer : Maintenance Assistant
Position : Colour Muster Yrn Dyeing Ltd.
Duties & Responsibilities:
Inspection of all Pipelines and fabrication
Maintenance of dyeing Machine, Hydro Extractor Machine, R.F Dryer Machine, Press Machine, Soft
winder Machine, Random winder machine, cranes etc.
Utility pipelines
Materials inspection
11. Page 11 of 24
Other Performances:
Strength
People orientation
Dynamic
Leadership and Organizing ability
Able to work under pressure
Language proficiency
English – Reading, Writing and Speaking
Bengali – Mother Tongue
Hindi – Speaking
Arabic – speaking
Training
Organization : Bangladesh industrial technical assistant centre
Professional training : fittings work welding process (GTAW, SMAW, TIG, and MIG) and visual inspection.
Duration : 11th
February, 2001 to 04th
April, 2001
Organization : Saudi vitrified clay pipe com. Ltd...
Professional training : clay pipe handling process,
Hydro testing procedures
Piping inspection procedures
Pipe laying and fixing procedures
Personal details:
Name : KAZI NAZMUL HAQUE
Father s name : Kazi abdul khaleque
Mother s name : Mrs. Feroza Begum
Date of Birth : 26th
April 1979 (Original)
12. Page 12 of 24
9th
November 1981 (as per certificate)
Nationality : Bangladeshi (By birth)
Religion : Islam
Marital status : Married
Height : 171 cm
Computer Knowledge: Operating System-Windows 98, 2000, XP & Vista etc.
Applications are MS Office, Internet, and E-mail etc.
Present address : Name : kazi nazmul haque
c/o : Kazi abdul khaleque
Village : Alakher char
Post office : Durgapur
Police station: kotwali
District : Comilla, Bangladesh
Confidence: As a QC supervisor with engineering background and with experience in various projects, I am highly
eager to have an opportunity to work with some world leading organizations. In that case, my career will be step
forwarded for my dynamism, honesty and sincerity.
Regards
KAZI NAZMUL HAQUE
THANK YOU