1. Civil/Structural/GIS Engineer
Onwuegbuchu, C. Kenneth
Email: kenonwuegbuchu@yahoo.com Phone: 0803-3337-656, 0805-0435-873.
Address: No.1 Joseph Avenue, Sangotedo, Lekki-Epe Expressway, Lagos
PROFESSIONAL SUMMARY
A Registered Civil/Structural Engineer with over 7 years of experience, particularly in the areas of
Offshore and Onshore structural engineering designs and analysis, Civil engineering design and
construction, and Infrastructure. I have successfully Trained/Facilitated Local Content Trainees from
different companies up to the tune of 1000 man-hours, experienced in Conceptual Studies, FEED and
Detailed Design Engineering. I have continually shown commitment and dedication while contributing
to project delivery. I have good working knowledge of the engineering codes and standards applicable
to Oil and Gas and civil engineering constructions. I have undergone professional Certified
Trainings/Courses on some Engineering Software, Quality Management System (QMS), Helicopter
Underwater Emergency Training (HUET), Project Management Professionals (PMP), AutoCAD 2012,
Microsoft Office Suite, Chattered Institute of Environmental and Health (CIEH), Acquired Site
Supervision experience while working with a construction contractor and a detailed design experience
while working with an engineering contractor on client’s Greenfield and Brownfield offshore facilities.
QUALIFICATIONS
• M.Sc. Civil/Structural Engineering [2013/2014 SESSION]
University of Lagos, Nigeria.
• B.Eng. (Hons) Civil/Structural Engineering Second Class Upper Division [2007/2008 SESSION]
Federal University of Technology, Owerri, Imo State, Nigeria
COMPUTER LITERACY / SOFTWARE EXPERIENCE
Technical Software: SACS / AutoCAD (2D) / Orion/STAAD-Pro/ PDMS
Other Software: Microsoft Office Suite (ArcGIS, Word, Excel, Power Point, Outlook)
Strong capacity for quick learning of new computer skills
CERTIFICATION/MEMBERSHIP OF PROFESSIONAL BODIES
COREN Certified Engineer Membership Number 28690
Member Nigerian Society of Engineers Membership Number 30799
Member Nigerian Institute of Management Membership Number 152462
Certified Associate Auto-CAD Autodesk Certification Number 00176226
TRAINING/FACILITATIONS
I have successfully trained and facilitated local content (NCBD) Trainees from different companies for
1000-manhours on the following course;
1.0 Basic Knowledge of Offshore & Onshore Structural Engineering
2.0 Basic Knowledge of SACS
3.0 Some offshore analyses using SACS
4.0 Basic Engineering
5.0 Material Take-off Preparation
6.0 Weight Control Calculation
PERSONAL SKILLS
• Experience in engineering practices in oil and gas industry
• Good knowledge of Engineering Codes and Standards applicable to Oil & Gas (API, ASTM, AISC
EMAIL:kenonwuegbuchu@yahoo.com ● PHONE: 0803-3337656, 0805-0435873

2. Civil/Structural/GIS Engineer
Onwuegbuchu, C. Kenneth
BSI Codes, Euro Codes etc.)
• Ability to work with people of different nationality and cultural backgrounds.
• Good Team player
• Strong communication and interpersonal skills (both oral and written)
• Proven analytical and hands-on problem solving skills
• Demonstrated organizational abilities with the capability to manage both time and stress
PROFESSIONAL EXPERIENCE:
MIC Construction Limited JUNE 2015 –Till Date
CLIENT: Lekki Gardens
PROJECT: Building Blocks of Twin Duplex
Job Title: Civil/Project Engineer
Job responsibilities include:
• Site Management
• Civil/Structural Designs and Calculations
• Guided the effort of semi-skilled labourers
DELTAAFRIK ENGINEERING LIMITED May 2015
CLIENT: Nigeria National Petroleum Corporation (NNPC)
PROJECT: Gas Revolution Industrial Park (GRIP) ($2.5m)
Job Title: GIS Consultant
Job responsibilities include:
• Calculation of Volume of Sand Pile to be used for reclamation.
• Plotting of Coordinates for various locations and purposes in the area of land mapped out.
• Plotting Coordinates for Borehole Locations and Cone Penetration Test (CPT) Locations.
• Satellite Imagery
DELTAAFRIK ENGINEERING LIMITED May 2011 – May 2015
CLIENTS: NNPC, MPN, SNEPCo, SEPLAT,
PROJECT 1: Gas Revolution Industrial Park (GRIP) ($2.5m)
Job Title: Lead GIS
Job responsibilities include but not limited to:
• Acquisition of LiDAR Data
• GIS Topographical Mapping
• GIS Method Statement
• LiDAR Mapping Exercise
• Plotting of Coordinates for various locations and purposes in the area of land mapped out.
• Plotting Coordinates for Borehole Locations and Cone Penetration Test (CPT) Locations.
• Satellite Imagery
PROJECT 2: Mobil Producing Nigeria (SFD-2)
Job Title: Structural Engineer
Job responsibilities include:
Designed and performed the following analyses on Yoho YP Launcher and Receiver Skids.
• In-Place
• Lifting
• Installation
• Pad eye Design
EMAIL:kenonwuegbuchu@yahoo.com ● PHONE: 0803-3337656, 0805-0435873

3. Civil/Structural/GIS Engineer
Onwuegbuchu, C. Kenneth
• Also prepared Material Take-Off on the skids.
Other responsibilities include, Weight Control update for the SFD-2 brownfield, updated Idoho BP
design report to reflect the latest changes, Basis of Design for the YP skids
PROJECT 3: BONGA SOUTH-WEST/APARO (BSWA) PROJECT (Performing FEED on 4 BSWA FPSO
Modules)
Job Title: Structural Engineer
Job responsibilities include:
Modeling and performing the following analyses on Future Gas Compression (FGC) Module of the
Floating Production Storage & Offloading (FPSO)
• In-Place
• Lifting
• Transportation
• Also prepared Material Take-Off for the Module.
PROJECT 4: SEPLAT OKPORHURU – PHASE 2 PROJECTS
Job Title: Structural Engineer
Job responsibilities include:
• Perform structural analysis and design of Manifold Skid
• Design of Saver pit
• Design of Support for Manifold Shelter
• Design of Drainage around the manifold
• Design of Concrete Support for the Skid & pig launcher
• Design of supports for equipment & pipes
• Prepare Design Specification for the project.
• Prepared Design report for the manifold skid
PROJECT 5: SNEPCo BONGA LIFE EXTENSION PROJECT
Job Title: Structural Engineer
Job responsibilities include:
• Data gathering for Gap Analysis on Bonga Facility.
• Serves as a Liaison Engineer between the Client and the Worley parsons’ counterpart in
Melbourne
PROJECT 6: Mobil Producing Nigeria (SFD-2)
Job Title: Structural Engineer
Job responsibilities include:
• Prepared Design Reports on In-place and Lifting analyses
• Perform In-Place and Lifting Analyses.
• Performed pipe support design and calculations
• Design of lifting Pad eye
• Preparation of Engineering Requisition on Green Field Facilities
• Preparation of Material Take-off (MTO) for Construction Support Stool / Grillage, Greenfield
(Ibot A, Idoho N) Substructure, and Brownfield (Ubit GW, Ubit GY, Yoho YP, Idoho BP).
• Prepared Spread sheet for miscellaneous member calculation as per API
• Worked on weight control calculation of both the Greenfield & Brownfield
• Nesting of seamed steel tubular formed from plates. This is done to minimize wastage while
preparing steel materials for seam tubular.
PROJECT 7: Mobil Producing Nigeria (PWD) Project
EMAIL:kenonwuegbuchu@yahoo.com ● PHONE: 0803-3337656, 0805-0435873

4. Civil/Structural/GIS Engineer
Onwuegbuchu, C. Kenneth
Job Title: Structural Engineer
Job responsibilities include:
• Embarked on a Site Visit to ascertain the integrity of supports for pipes on the sump area
• Prepared site visit report based on the findings.
• Attended Meetings involving Client based on the findings.
PROJECT 8: Mobil Producing Nigeria (SUP)
Job Title: Structural Engineer
Job responsibilities include:
• Prepared Technical Bid Evaluation from tenderers based on the top-up steel material needed
for Asabo, Idoho, Usari, Oso, Yoho, Bop, Inim, Erha, & Ekpe facilities upgrade.
• Prepared Engineering Requisition for top-up steel materials for Asabo, Idoho, Usari, Oso, Yoho,
Bop, Inim, Erha, & Ekpe facilities upgrade.
• Prepared Material Take-Off for top-up steel materials Asabo, Idoho, Usari, Oso, Yoho, Bop,
Inim, Erha, & Ekpe facilities upgrade.
AMAZON ENERGY LIMITED OCT. 2010 - MAY 2011
CLIENT: DAEWOO NIGERIA LIMITED
PROJECT: UGHELLI EAST – UTOROGU DOMGAS PIPELINES PROJECT
Project Summary: Replacement of Ughelli east – Utorogu domestic gas pipelines
Job Title: Structural Engineer
Job responsibilities include:
• Preparation of Structural Drawings
• Preparation of Pipelines Support Calculation
• Preparation of Bar Bending Schedule & Bill of Materials
• Prepared Spread sheets for Reinforce Concrete Design
AMAZON ENERGY LIMITED JUNE 2007 – NOV.
2007
CLIENT: Mobil Producing Nigeria
PROJECT: UBIT Production Field Redevelopment Project
Job Title: Internship (Industrial Training - SIWES)
Job responsibilities include:
• Participated in the design and detailing of steel structures using Auto-CAD
• Acquired competent level skill on determination of materials take-offs (MTO) from the design
drawings, a skill I utilized in conducting material reconciliation.
NIDACO GROUP NIGERIA LIMITED SEPT. 2006 – NOV. 2006
CLIENT: AIM CONSULTANTS/ ENGINEERS LTD, LAGOS
PROJECT: Construction of Lawn Tennis Court for COOL FM
Job Title: Internship (Industrial Training - SIWES)
Job responsibilities include:
• Guided the efforts of site workers on methodology for laying reinforcement, the right concrete
mix, curing of concrete, and the stripping of the form work in the project.
• Translated and interpreted the working drawings to the semi-skilled site workers.
INTERESTS REFERENCES:
Music, Traveling, and Sports. Available on request.
EMAIL:kenonwuegbuchu@yahoo.com ● PHONE: 0803-3337656, 0805-0435873