1

1. UTP Cable Configuration and Installation

2. TOPIC FOR TODAY
• DIFFERENT ARRANGEMENT OF A UTP CABLE
• TOOLS AND MATERIALS USED IN INSTALLING UTP CABLE

3. TWISTED PAIR CABLE CATEGORIES

4. WHAT IS THE INSIDE OF THE UTP CABLES LOOKS LIKE?

5. WHY DO THE WIRES ARE BEING TWISTED?
To cancel:
1. Noise
2. Crosstalk

6. STANDARD ARRANGEMENT OF WIRE OF A UTP CABLE

7. CONFIGURATION OF UTP CABLE ACCORDING TO THE
DEVICES THAT WILL BE CONNECTED
Uses to connect console
port

8. TOOL & MATERIALS IN INSTALLING UTP CABLE
. Wire Cutter
Crimp Tool . Wire Stripper
Cable Tester
RJ45 Casing
RJ45 Connector

9. STEPS IN CRIMPING A UTP CABLE
1.

10. STEPS IN CRIMPING A UTP CABLE
2.

11. STEPS IN CRIMPING A UTP CABLE
3.

12. STEPS IN CRIMPING A UTP CABLE
4. Cut the wires into an even line 1⁄2 inch (13 mm) from
sheathing. Hold the wires with your thumb and index
finger to keep them in order. Then, use the cutting section
of the crimping tool to cut them into an even line.[4]
The cutting section of the tool will resemble wire cutters.
The wires must be in an even line to be crimped into the rj-
45 connector properly. If you cut them in an uneven line,
move further down the wires and cut them again.

13. STEPS IN CRIMPING A UTP CABLE
5.

14. STEPS IN CRIMPING A UTP CABLE
Proper wire
placement

15. STEPS IN CRIMPING A UTP CABLE
6.

16. STEPS IN CRIMPING A UTP CABLE
7.

17. STEPS IN CRIMPING A UTP CABLE
8.