Lightnng Protection Systems as per NFC17-102 ESE Type

1. International Lightning Association May 2017
The French Standard for Early Streamer Emission (ESE)
lightning protection systems NFC 17-102 (September 2011
Version)
Lightning Protection Association May 2017
May 2017

2. Fire Accident Due in Solar PV Power Plant
We Want India Safe Practice Earthing and
Protection

3. India Smart Practice Earthing and
Protection

8. Smart Infra

10. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Harmonization with EN 62305 Series
EN 62305 series standard is recognized as a reference in the field of
lightning protection of conventional type. This standard explains how to
select, install and verify conventional systems of protection against
lightning.
Since there is no particular reason for the rules systems with passive rods
differ from those governing systems with ESE Lightning Protection systems,
NF C 17102, 2011 version has been created to harmonize the two sets of
constraints.
Including stress tests of the previous editions of the NF C 17102 had to be
more severe than passive to ensure proper functioning of ESE Active
Lightning Rod.
Series EN 62305 does not cover ESE Lightning Rod technology devices,
revision of the NF C 17-102 appeared essential to provide the design
requirements of an ESE lightning rod and those of a lightning protection
system that implementing them.
May, 2017

11. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Harmonization with EN 62305 Series
Continued
An international working group was formed to create an entirely new
standard. It was important to have international commentary to use this
standard as a basis for all countries already using ESE Lightning Rod Systems
or those who wish to use it. These countries have taken or will take
standard NF C 17102 (2011 September version) as a reference to create
their own national standards.
So this new NF C 17102 Edition (Version 2011) is a complete overhaul of the
standard following the publication of the series of European standards EN
62305 and EN 62305-3 particularly giving the requirements for protection of
structures against lightning.
May, 2017

12. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Harmonization with EN 50164 Series
The standard EN 50164 is the standard reference for lightning protection
components for which manufacturers and suppliers must test their lightning
protection components to verify the design and quality. As with the standard EN
62305, there is no particular reason that the rules of passive lightning protection
components differ from those governing by ESE lightning protection systems,
revision of the NF C 17-102 was created to harmonize the two sets of constraints.
Furthermore, as the series EN 50164 does not address ESE lightning protection
components technology, revision of the NF C 17-102 appeared essential to provide
the design requirements and quality for ESE lightning protection components.
May, 2017
Harmonization with EN 62 305-2
 The method of lightning risk analysis of the 62305-2 standard Ed.1 was fully
integrated in Appendix A of the NFC 17-102 standard without any modification. It
will be necessary to update the 17-102 standard to reflect the Edition 2 of the
European standard.

13. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Highlight Annex C (Requirements and
test procedures)
C.3 Type test
The tests shall be carried out on a sample according to the hereafter flowchart.
May, 2017

14. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Highlight Annex C (Requirements and
test procedures)
C.3 Type test (continuation)
May, 2017

15. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Highlight Annex C (Requirements and
test procedures)
C.3 Type test (continuation)
May, 2017

16. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Tests on , lightning ESE Air Terminal
Pulsar during salt mist treatment: during Humid Sulphurous
atmosphere Treatment:
May, 2017

17. The French Standard for Early Streamer Emission (ESE) lightning protection systems NFC 17-
102 (September 2011 Version)
Tests on lightning ESE Air Terminal
Command cabin of the 10/350 The ESE LA under 100 kA 10/350 wave Test:
surge wave Generator:
The 10/350 Generator
May, 2017

18. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Tests on , lightning ESE Air Terminal
Tested Products just before
the ESEAT efficiency Test:
The High Voltage Laboratory of Pau
during the ESEAT efficiency test :
(Simple Rod Measurement)
May, 2017

19. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Tests on , lightning ESE Air Terminal
The High Voltage Laboratory IREC (Canada) during the
ESEAT efficiency test
7 meters long arc RodCheck Indicator Test 40kA 10/350
May, 2017

20. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Tests on , lightning ESE Air Terminal
A comprehensive report
overall compliance was
written by APAVE
in French and English in
October 2017.
May, 2017

21. The French Standard for Early Streamer Emission (ESE) lightning protection systems
NFC 17-102 (September 2011 Version)
Conclusion
The French Standard NFC 17-102 (September 2011 Version) is a
comprehensive standard that refers to many installation and product
standards in the lightning protection domain.
The NFC 17-102 (September 2011 Version) is an exacting standard to
ensure product quality.
Products that pass the tests according to this standard will be of
proven quality.
Thank you for Accepting Latest
NFC17-102(2011) Eureopeon Standard
May, 2017

22. External/Internal Surge Source

23. Surge in Systems and Result

24. Copper Clad Steel Solid ROD and Conductor

28. Earthing and Bonding

30. Copper Cladded Conductor For Electrical
Installation
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper. These
conductors/ wires
or strands are equipped with the strength of steel with the conductivity and copper with the better corrosion
resistance property. The concentric copper cladding is metallurgic ally bonded to a steel core through a continuous,
solid cladding process using pressure rolling for primary bonding. The copper cladding
thickness remains constant surrounding steel. We use different steel grades for the steel core result in Dead Soft
Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in Annealed
and Hard drawn. We are delivering products with varied conductivity and tensile strength as per the customer need.
Further, the wire can be processed to be silver plated or tinned copper clad steel wire.

31. Most Efficient JointProcess
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.

32. What is Exothermic Welding System?
Copper to Bi-Metal and Alumenium
Types of Exothermic Joints:
Possible to join any bi metal except aluminum
Exothermic welding is a process of making maintain free highly molecular bonding process is superior in
performance connection to any known mechanical or compression-type surface-to-surface contact connector.
Exothermic weld connections provide current carrying (fusing) capacity equal to that of the conductor and will
not deteriorate with age.
 It offers Electrical connections between two or more copper to copper and copper to steel conductors.
 Highly portable method as it does not require any external power source or heat source, so it can be done
almost anywhere.
 It provides strong permanent molecular bond among metallic conductors that cannot loosen and further will
not deteriorate with age.
 Connection does not corrode with time and it offers permanent conductivity.

33. PASSIVE PROTECTION SYSTEM
Angular Protection
45 deg. / 60 deg. / 72 deg. Based on the Level of Protection

34. The 100% of lightning energy breaks down as
follows:
a) 50% of the lightning current will flow through
the ground
b) 50% of the lightning current will flow over the
connected metal parts out of the building:
• about 10% to the water pipe (metal)
• about 10% to the gas pipe (metal)
• about 10% to the oil pipe (metal tank)
• about 10% to the sewage pipe
• a out % to the power supplier’s i o i g feed
• max. 5% or 5 kA shared across all data lines
50 %
50 %
Equipotential bonding for lightning protection according IEC 61024-
1 and IEC 61312-1; IEC62305
In India & Sri Lanka Only Chance is Power Line
Approximately 50 % of Total Lightning Current has
to be diverted to Power lines

35. LIGHTNING FORMATION

36. Facts about Lightning
• A strike can average 100 million volts of electricity
• Current of up to 200,000 amperes
• Can generate 54,000 oF
• 10/350MicroSec/50KA Fault Current/Discharge in
Nano Sec
Protection
Earthing Design100KA Fault Current/Joints Exothermic
/Flexible Down Conductor with Shortest Route &
Less Corner

37. • Lightning Protection Standard use in India
(IS2309 Now IEC 62305-5)
Working Principle Angullar No Compromise with Design
Max Protection 30Mtrs from One
No Product warrenty from Manufacturer
NFC17-102(2011)
Working Principle Radius Compromise with Design
Possible with Increasing Qty of ESE
Max Protection 109 Mtrs Radius from One
Manufacturing Warrenty and Test Certificate for
Products Available

38. EARLY STREAMER EMISSION
t = TFR – TESE
E.S.E. LIGHTNING RODS
ACTIVE PROTECTION SYSTEMS
Radius Protection

39. junction point
Upward leader
Downward leader
LIGHTNING FORMATION

41. Installation
ESE AT with radius protection form 32 mtr to 107 mtr.
DMC Insulator .
GI/FRP Mast .
Down Conductor Copper / Copper Cadmium
Cable 70 sq. mm
Copper Bonded Ground Earthing

46. • Many Industries now using Follwing Products and Created Standard Instruction Ducuments.
• Indian Railway RDSO Specification (S&T) Draft New 2016 (MaintenanceFree Earthing &Surge Protection)
• Indian Railway Direct Tender for ESE Type LA (Class A Type Lightning Arrestors)
• Power Grid for Transmission Tower Instalation (Maintenance Free Earthing & Exothermic Joints)
• Power Grid for Transmission UG Cable Instalation (Maintenance Free Earthing & Exothermic Joints)
• Airport Authority of India (CNS) Maintinance Free Earthing,ESE Type LA and Surge Protection
• IOCL Pipe Line for (Maintenance Free Earthing & Exothermic Joints)
• Haryana Govt for Power T&D (Maintenance Free Earthing & Exothermic Joints)
• Gujarat Govt for Power T&D (Maintenance Free Earthing & Exothermic Joints)
• Andhra Pradesh(Infrastructure Developments) for Maintenance Free Earthing
• Andhra Pradesh Govt for Power T&D (Maintenance Free Earthing & Exothermic Joints)
• MNRE /SECI for Solar PV Project Maintinance Free Earthing,ESE Type LA and Surge Protection
• NTPC for Solar PV Maintinance Free Earthing,ESE Type LA and Surge Protection and Copper Clad Steel
Conductor
• West Bengal State for Maintinance Free Earthing and ESE Type LA

48. Neeraj Saini – 9910398538
Rahul Verma – 9910398535
Manav Chandra - 9910398999
manav@jmv.co.in