• I have about four (4) years of experience in Electrical engineering field practice particularly in Electrical Design and Site Engineer for MEP projects of electrical system and contractor technical office. • Capable of performing full distribution system design including Low & Medium Tension Networks, Emergency and Critical Load calculations studies, A/C loads, Plumbing & Fire Fighting loads, Switch Gear, Transformers, Emergency generator and U.P.S, Sub_ stations, Power fixtures, Sizing and routes of cables/conduits/cable trays and ladders, Short circuit, Voltage drop, Grounding & Lightning protection systems, Indoor-Outdoor Lighting fixtures, Landscape and Façade lighting.

1. Electrical & Electronics Engineer
Mahmoud Mohamed Hegazy
0589240949
E-mail: Eng.m_hegazy100@yahoo.com
Personaldata:
Date of birth: 1/4/1985
Nationality: Egyptian.
Status: Married.
Education:
 Graduated from Menofia University- Faculty of Electronic Engineering.
 Project study of menofia distribution electrical network with grade (Excellent).
ProfessionalExperiences:
Summary
 I have aboutfour (4) years of experience inElectrical engineeringfieldpractice
particularly in Electrical Design and Site Engineer for MEP projects of electrical
systemandcontractor technical office.
 Capable of performingfull distributionsystemdesignincludingLow & Medium
TensionNetworks,EmergencyandCritical Loadcalculationsstudies,A/Cloads,
Plumbing&Fire Fightingloads,SwitchGear,Transformers,Emergency
generatorandU.P.S,Sub_ stations,Powerfixtures,Sizingandroutesof
cables/conduits/cable trays andladders,Shortcircuit,Voltagedrop,Grounding
& Lightningprotectionsystems,Indoor-OutdoorLightingfixtures,Landscape
and Façade lighting.
Experience profile:
1-Job: Project Engineer
Location: AL Ahmadi Consultants
Time: September 2013……...till now.
Responsibilities:
• Participated in project:
(Land reclamation project and construction of newindustrial complexes) –Ismailia
 Planning and execution on the electrical side for MEP projects closely monitoring the
construction activities, attending weekly meetings at site with other Engineers and
Contractor- Maintained weekly status reports.
 Review and approval of shop drawings & material submittals submitted by Contractor.
 Installations of all electrical works were carried out as per approved shop drawings
ensuring compliance with safety requirements and as per standards.
 Coordinate with Mechanical, civil, Architect Engineers, Discuss technical aspects of
electrical system with Contractor towards successful completion of project.
 LV switchgear substation, Installation of transformers up to 1000 KVA, termination into
panel boards.

2.  Installation of Electrical Installation (Internal + External) - Addressable Fire Alarm
system, Security (CCTV and Access control), Public Address, Internal & External
Decorative light fixtures, Illumination and dimming systems, Power receptacles, Cable
Routing, Earthing, cable trays for tunnel, Panel Board and Building Management
System, automation System, Audio Video System, Interactive TV system & video in
demand with HDMI, UPS System, Lifts, ATS panels, Computer network (Fiber Optics,
cables), Telephone Network, Diesel generators, Lightning Protection System, LV &
Switchgears (MDB, SMDB, MCC….).
 Following higher management time schedule instructions and advices, reporting work
field condition problems & statues to higher management, following activities of other
departments in site.
 Coordinate with Contractor for the fast progress work on site implementation of
advanced system and material available in market as per the requirement and conduct
weekly Site Inspection & prepare Monthly Progress Reports.
 Conduct inspections for Quality Control and Quality Assurance Program, reporting,
finding and recommendations.
2-Job: Electrical Site Engineer
Location: AL Ahmadi Consultants
Time: January 2015……. July 2017
Responsibilities:
• Review shop drawings, material submittal, calculations.
• Review and monitor the detailed engineering submissions and
design concept.
•Technical bid evaluations.
•Assist and support procurement team.
• Reviewing, approving and processing all electrical technical
submittals.
• Coordinate & participates in project discussions with
departments.
• Attend weekly project review meetings and report on Electrical
work.
• Follows-up with the requirements from departments for
implementation.
• Monitoring the electrical works for conformance with the
contract documents.
• Reviewing contractor’s electrical change order proposals and
preparing recommendations.
• Conducts sites visits and assessment,as required to execute
design work.
• Perform all other duties given by MEP Project Manager.
3-Job: Electrical Site Engineer
Location: AL Ahmadi Consultants.
Time: July 2014……...January 2015.
Responsibilities:

3. Design the following items for Egypt projects:
 Electrical power distribution system.
 Internal & external lighting design & calculations.
 Load calculation, selection of generator & power
transformer, single line diagram, load schedule, cables
selection, short circuit, voltage drop calculation & sizing
of cable tray.
 Grounding & lightning.
 Quantities surveying & producing BOQ.
4-Job: Electrical Maintenance Engineer
Location:AL Ahmadi Consultants.
Time: August 2013……...July 2014.
Responsibilities:
 maintenance of electrical facilities for administrative buildings
(interior & area lighting systems, power systems, distribution
panels,Fire Alarm, Low Voltage –Low Current, HVAC) for buildings.
Computer Skills:
Engineering:
 AutoCAD.
 Eagle for design electronic circuit.
Other:
 Excellent knowledge of MS office applications.
Training courses & certifications:
 Certified by the Ministry of Electricity and Renewable Energy Certificate (solar
energy) in October 2014.
 Programmable Logic Controller (PLC).
 Certified by the International Court of Arbitration and a certificate from the Faculty of
Law,An Shams University ratified by the Egyptian Ministry of Foreign Affairs in
Dec 2013.
 Certified Classic Control April 2011.
 Fundamentals of engineering examination (FE Certificate) by NCEES October.2011.
 Course in Power Factor and Harmonics by Schneider Electric July 2011.
 Electrical Cables Certificate by The Arab Contractors Dec.2010.
 Training at Cairo of Electrical Distribution Company in summer 2010.
 Erection, Operation and Maintenance of Power Transformers 33/11KV & 11/0.4KV
(Pole Mounted) Transformers.
Language:
 Arabic: Mother tongue.
 English: Good command of spoken and written English.