through dovetail joint

1. JOB NO. 01
WORKSHOP MANUFACTURING PRACTICES (CARPENTRY SHOP)
BRANCH: MECHANICAL/CIVIL ENGINEERING (group-2)
JOB NAME: TO MAKE A DOVETAIL T-JOINT OF GIVEN DIMENSIONS
Write the procedure to make a dovetail T-joint which you have done in workshop also make the neat
and clean sketches of different carpentry tools and write their functions which you have used during
completion of your job.
H2 = 80 mm; V1 = 25 mm; upper tapered length = 25 mm and lower tapered length = 15 mm.
Fig. 1(a) Horizontal part.
H2 = 25 mm; H7 = 5 mm; V6 = 75 mm and total vertical length = 100 mm.
Fig. 1(b) Vertical part.

2. Fig. 2 Individual part of dovetail T-joint.
Fig. 3 3-D and Front-View of dovetail T-joint.