1.
MARC DOUGLAS GOUTHRO
10A Glen Road
Salem, NH 03079
(978) 210-5210
marcgouthro@yahoo.com
A senior engineering professional with over 20 years of industry experience
ZACHRY GROUP INC. – System One Services Denver, CO
Zachry Group is a turnkey construction, engineering, maintenance, turnaround, and fabrication firm
offering services to the power, energy, chemicals, manufacturing, and industrial sectors, headquartered
in San Antonio, TX.
Construction Field Engineer, Electrical & Instruments 2014-2016
Oversee all aspects of field engineering and construction work on-site related to demolition preparation
for four operating units to receive new wet FGD scrubbers, bag houses, ductwork, ID fans, and BOP
equipment. Provide engineering support for new construction as demolition activities were completed.
Louisville Gas & Electric, a PPL Company Louisville, KY
Mill Creek Generating Station, AQCS Compliance Project Units 1-4, 1472 MW, Coal
• Develop detailed Lock Out/Tag Out database for all cables 4kV to 24V entering and exiting
pre-scoped demolition zones in manholes, cable trays, pipe racks, and conduit raceways for
multiple structures per unit.
• Coordinate with Owner’s project engineering team to determine which cables and equipment
were required to remain in service until unit outages could begin.
• Field design and oversee all new re-routed cable and raceway installation, while units were
operating, necessary to minimize re-connection time during unit outages. Supervise the removal
of de-energized cable and equipment as demolition progressed.
• Working closely with other engineers, craft workers, supervisors, owner representatives, and the
Zachry management team, demolition efforts were completed safely, without unit interruption,
on time or ahead of schedule.
HASKELL CORPORATION – Footbridge Energy Staffing Anchorage, AK
Haskell Corporation is a heavy industrial, general contractor, and fabricator located in Bellingham, WA.
Consulting Engineer, Electrical Construction 2013-2014
Assist in the engineering construction of a 170 MW 10 unit duel fuel reciprocating diesel/natural gas
engine power block, SCR air quality control system, radiator structure, and balance of plant. Provide
overall supervision and management for project’s electrical subcontractor.
• Ensured electrical contractor staffing was sufficient to meet schedule. Reported status of
electrical construction progress and issues to Project Manager on a weekly basis.
• Participated in constructability reviews with the client, construction and subcontract teams;
made recommendations to EPC as to which method/design would optimize field construction.
• Verified and monitored electrical contractor’s LOTO program met industry standards; ensure
RFI and field change notice policies were understood and followed.

2.
• Participated in client meetings that discussed definition of scope, identification of scope changes,
estimate reviews, design review questions and resolutions, model reviews and construction
concerns.
• Tracked electrical construction bulk quantities (terminations, linear footage of cable, etc.) to
provide accurate estimate at completion quantities to project controls.
• Provided field support to client’s EPC contractor when appropriate to meet common project
goals.
FLUOR O&M SERVICES – Proctor & Gamble AMC Andover,
MA
Fluor Operations & Maintenance Services provides support to existing power stations, chemical plants,
refineries, and other industrial and commercial operations. Fluor site teams identify and deliver savings
and value creation through subject matter expertise, contractor management, and constructability
execution.
Construction Planner, Electrical 2012-2013
Manage assigned projects within discipline occasionally assigned as a construction manager with
responsibilities for multiple disciplines. Planner responsibilities include safety, cost control, quality,
construction execution, and installation qualification.
• Ensure sub-contractor safety performance and adherence to site safety policies. Actively participate in
project safety planning developing specific safety plans for projects and shutdowns. Perform daily
safety audits throughout work areas for adherence to JSA, hot work, confined space, and fall
protection zero tolerance policies.
• Responsible for understanding the technical scope of each project and having a thorough
understanding of all contractual requirements. Ensure national, state, and local codes are followed,
coordinating inspections with authorities having jurisdiction through project completion.
• Integrate principles of constructability to review construction processes from start to finish during pre-
construction phase effectively reducing delays, scope creep, and cost overruns.
THE SHAW GROUP, INC. Stoughton, MA / Charlotte, NC
The Shaw Group is a global provider of turnkey engineering design, procurement, construction,
maintenance, and operations services to the power industry.
Construction Field Engineer, Electrical & Instruments 2009-2012
Perform electrical field engineering work on-site in support of construction of supercritical coal and
natural gas fired power plants for North American clients:
Duke Energy Carolinas
Dan River Combined Cycle Plant 620 MW Natural Gas 2 X 1 CC Eden, NC
Cliffside Steam Station Modernization 850 MW Supercritical Coal Cliffside, NC
Dominion Virginia Power
Virginia City Hybrid Energy Center 585 MW Coal and Wood Hybrid St. Paul, VA
Xcel Energy Colorado
Comanche 3 Generating Station 766 MW Supercritical Coal Pueblo, CO
• Coordinate with home office engineering, electrical construction supervision, and subcontract

3.
administration in planning construction work while supporting field personnel, system turnover,
and commissioning teams.
• Review and interpret project specifications, engineering drawings, and bid process documents to
ensure construction executes engineering design as planned.
• Primary field engineer assigned to support construction of the steam turbine generator sets, GSU
and Auxiliary transformers, cooling tower, and all peripheral support equipment and instruments.
o Coordinated training and development program to perform on-site installation,
termination, and testing for fiber optic cable reducing cost to the project budget.
Staff Electrical Engineer 2007-2009
• Ensure EPC contract requirements are reflected in the project design criteria. Review design for
constructability and ensure criteria complies with corporate safety, ethical, and engineering
standards.
• Develop and continuously maintain project electrical load lists for use in one-line development
and system analysis during initial and final design for Maryland client’s fleet of FGD wet
scrubbers.
• Design, specify, and develop for procurement engineering design of resistance grounded low
voltage motor control centers and associated support equipment.
• Review and edit to improve discipline master specifications and project specific procedures to
generate engineering deliverables using applicable codes, corporate, and industry standards.
SHREWSBURY ELECTRIC AND CABLE OPERATIONS Shrewsbury, MA
Shrewsbury Light is a 60 MW municipal electric and cable utility with three substations and one
generating facility with 13 MW roll-on capacity.
Associate Substation Engineer 2005-2006
• Develop, implement, and perform substation inspection program. Make recommendations based
upon analysis of inspection reports. Coordinate implementation of substation preventative
maintenance program for all substation equipment using contractors and other utility staff.
• Write routine and special switching orders for substation and distribution system, and then
perform switching functions for both normal and emergency situations.
• Utilize SCADA system for monitoring operations and load flow. Develop technical reports and
implement changes/enhancements to SCADA system.
MASSACHUSETTS ELECTRIC CO. / A NATIONAL GRID U.S.A. CO. Boston, MA
Provide overall electrical engineering services through the engineering design, estimating, and
construction phases of power systems projects including scheduling and cost control. Provide the
engineering to ensure the technical and operating adequacy of new and existing electrical distribution
facilities.
Operations Engineer, Distribution Design 1999-2005
• Design and construct power distribution system, utilizing cost effective methods.
• Perform engineering studies and evaluate electrical system performance.
• Engineer and supervise the proper installation of 15kV and 35kV spacer cable and open wire
applications.
• Perform necessary fieldwork to update electronic database and cost effectively design projects.
• Volunteer member of a specially trained team of engineers responsible for the operation,
inspection, and preventative maintenance of 115kV medium-pressure fluid filled underground
cables.

4.
On-Call Engineering
• Provide engineering support to overhead, underground, and substation groups in response to
service outages, system contingencies, and storms.
• Respond safely and rapidly to all distribution feeder lockouts and act as district control authority
to direct all restoration efforts safely.
• Coordinate restoration efforts with supervisors and team leader in determining appropriate crew
compliment to be cost effective while minimizing customer impact.
• Ensure computerized storm restoration systems are updated for local authorities, customer
service, and corporate communications teams during emergency responses.
AUBURN INTERNATIONAL INC. Houston, TX / Danvers,
MA
A manufacturing firm that sells and services patented technologies for process optimization worldwide.
Production Supervisor 1996-
1998
• Direct all phases of production and testing of on-line and off-line Industrial Magnetic Resonance
analyzers for oil refineries in the polymer production industry including Exxon/Mobil, Shell, and
British Petroleum.
• Interface with engineering, procurement, and senior management to provide the production team
with the resources required for the construction and testing of all IMR equipment.
• Schedule daily and weekly labor. Recruit, interview, and train full time and coop student
employees.
Field Service Engineer 1995- 1996
• Responsible for coordinating with client’s process engineers to install Industrial Magnetic
Resonance analyzers into existing polymer process lines.
• Provided on-site technical training to process engineers, control room operators, and maintenance
technicians.
• Coordinated the development of training material on analyzer system operation, preventative
maintenance, troubleshooting, and hardware operation.
• Developed and presented lectures and slide shows as part of formal in-house product training
courses for worldwide customers.
Electrical-Mechanical Technician 1992-1995
• Project leader responsible for construction of Industrial Magnetic Resonance analyzers and
peripheral equipment.
• Performed all types of electrical-mechanical assembly and RF testing using manufacturing tools
and diagnostic equipment including oscilloscopes, function generators, and multi-meters.
• Developed hands on construction and troubleshooting skills working with programmable logic
controllers, electrical conduit and wiring, and pneumatic equipment and tubing.
• Participated aggressively in a World Class Manufacturing suggestion program that enhanced
product quality, manufacturing procedures, and processes.
EDUCATION
WENTWORTH INSTITUTE OF TECHNOLOGY Boston, MA

5.
Bachelor of Science/Cum Laude, Electronic Engineering Technology 1992
Associate of Science/Cum Laude, Electrical Engineering Technology 1990
References and Salary History Furnished Upon Request
_____________________________________________________________________________
_
Key Words: safety, JSA, audits, electric, utility, underground, overhead, fuse co-ordination,
curves, manhole, substation, relay, protection, SCADA, fault finding, short circuit, analysis,
medium, high voltage switching, tie breaker scheme, CCVT, metering, NFPA 70, ANSI, NESC,
ETAP, CEMS, EPA, air quality control, coal, limestone, gypsum, FGD, scrubber, MCC,
switchgear, lockout, fiber optic, Foundation Fieldbus, DeviceNet, UPS, DC, batteries, chargers,
classified areas, protection, generator, excitation, non-seg bus, isolated phase bus, steam
turbine, EHC, construction execution, project controls, estimating, subcontracts, purchasing,
procurement, scheduling, Microsoft Project, demolition, turnover, start-up, commissioning,
Vogt, Siemens, ABB, Toshiba, Mitsubishi, Babcock Power, Clyde Bergmann Power Group,
SAMM, sulphuric acid mist mitigation, Schneider, Gutor, hydrated lime, activated carbon

6.
Bachelor of Science/Cum Laude, Electronic Engineering Technology 1992
Associate of Science/Cum Laude, Electrical Engineering Technology 1990
References and Salary History Furnished Upon Request
_____________________________________________________________________________
_
Key Words: safety, JSA, audits, electric, utility, underground, overhead, fuse co-ordination,
curves, manhole, substation, relay, protection, SCADA, fault finding, short circuit, analysis,
medium, high voltage switching, tie breaker scheme, CCVT, metering, NFPA 70, ANSI, NESC,
ETAP, CEMS, EPA, air quality control, coal, limestone, gypsum, FGD, scrubber, MCC,
switchgear, lockout, fiber optic, Foundation Fieldbus, DeviceNet, UPS, DC, batteries, chargers,
classified areas, protection, generator, excitation, non-seg bus, isolated phase bus, steam
turbine, EHC, construction execution, project controls, estimating, subcontracts, purchasing,
procurement, scheduling, Microsoft Project, demolition, turnover, start-up, commissioning,
Vogt, Siemens, ABB, Toshiba, Mitsubishi, Babcock Power, Clyde Bergmann Power Group,
SAMM, sulphuric acid mist mitigation, Schneider, Gutor, hydrated lime, activated carbon