,kn95 ,n95 ,n95 mask supplier ,kn95 mask supplier ,kn95 mask manufacturer ,china fda approved kn95 mask ,kn95 mask pricing ,k95 cost ,k95 bulk stock ,k95 bulk supplier ,china manufacturer of k95 masks ,k95 made in china ,k95 masks apple pay ,k95 masks google pay ,cheap k95 mask ,low cost k95 masks ,1x technologies llc

1. ​1X Technologies LLC Engineering Data Sheet
1X Technologies KN95 Filtering Facepiece
Respirator Engineering Specification
Description​: ​1XTech® Part Number: #1XT-KN95-FFR (2020) --​ KN95​ (GB2626-2006) Filtering
Facepiece Respirator (FFR), (Foldable disposable respirator) Scientifically Proven Advanced PPE
Specification: Because You Require Quality, Quickly!®
Applications
● For use as one of the five levels of CDC’s ​“hierarchy of controls”​ guidance for the optimal way to
prevent airborne transmission of the virus by controlling exposures to occupational hazards and
protecting the worker through the use of PPE.
● Suited for use in a broad range of commercial, industrial, institutional and healthcare applications,
where reliability is a major concern, personal space is limited and ease of use is critical in
protecting the wearer from inhaling hazardous atmospheres, including fumes, vapors, gases and
particulate matter such as dust and airborne microorganisms.
● Pursuant to Section 564(b)(1)(C) of the Federal Food, Drug, and Cosmetic Act (the Act) (21
U.S.C. §360bbb-3(b)(1)(C)), the Secretary of the Department of Health and Human Services
(HHS) April 3rd, 2020 for use in United States Healthcare Marketplace when used in accordance
with CDC recommendations to prevent wearer exposure to pathogenic biological airborne
particulates during FFR shortages resulting from the COVID-19 outbreak.
Features
● Excellent particulate blockage, the KN95 respirator blocks at least 95 percent of very small (0.3
microns) test particles.
● KN95 (China GB2626-2006 standard) is a value & performance results-driven substitute to the
N95 Respirator N95 (United States NIOSH-42CFR84 standard) as ​outlined by CDC​.
● Compare to 3M 9502+ for KN95 Mask Performance Metrics.
Standards
1. CE listed:​ YES - Conforms to ​Conformitè Europëenne​ (CE) standards.
2. FDA Certified:​ YES - First ​FDA EAU​ Certificate of Registration in April 2020.
3. ISO9001 QMS Certified:​ YES - Factory Certified for International Standard for Quality
Management Systems ​ISO9001 QMS​.
4. RoHS: ​YES - ​RoHS 2​ Directive 2011/65/EU Restriction of the Use of Hazardous Substances.
5. REACH Compliant:​ YES - Conforms to Registration, Evaluation, Authorisation, and Restriction
of Chemicals directive, ​REACH 2007​.
It’s the Mission of 1X Technologies LLC to provide electrical professionals with advanced products and knowledge that completely fulfills their
requirements. We offer value through speed, ingenuity, and the ability to provide unique solutions that others can’t. Our friendly, knowledgeable, and
professional staff will truly go the extra mile to help inspire, educate, and problem-solve for our customers. We’re Here Because You Require Quality,
Quickly!® Notes: 3M® is a registered trademark of 3M Company. 1XTech® KN95 Respirator is not manufactured by 3M. All orders are subject to 1X
Technologies Terms of sale.*Data provided on this page is nominal and subject to change.
​1xtechnologies.com
1

2. ​1X Technologies LLC Engineering Data Sheet
1XTech® KN95 Filtering Facepiece Respirator Engineering Specification
Size​: (OSFM) One Size Fits Most
Filter performance – (must be ≥ X% efficient)​: ≥ 95% (Filters 95 percent of particles with a
mass median diameter of 0.3 micrometers. The filter is evaluated to measure the reduction in
concentrations of specific aerosols in the air that passes through a five-layer three-dimensional
KN95 filter)
Test agent: ​NaCl (The aerosol that is generated during the filter performance test.)
TA Flow rate:​ 95 L/min
Total inward leakage (TIL):​ ≤ 8% leakage (individual and arithmetic mean) tested on human
subjects each performing exercises. (TIL = The amount of a specific aerosol that enters the
tested respirator facepiece via both filter penetration and face seal leakage, while a wearer
performs a series of exercises in a test chamber.)
Inhalation resistance – max pressure drop: ​ ≤ 350 Pa (The resistance air is subjected to as
it moves through a medium, such as a respirator filter)
IR Flow rate:​ 85 L/min
Exhalation Resistance - max pressure drop: ​ ≤ 250 Pa (The resistance air is subjected to as
it moves through a medium, such as a respirator filter)
ER Flow rate:​ 85 L/min
Exhalation valve leakage requirement:​ Depressurization n to 0 Pa ≥ 20 sec
Force applied: ​-1180 Pa
CO2 clearance requirement: ​≤ 1%
Filter performance: ​The filter is evaluated to measure the reduction in concentrations of
specific aerosols in the air that passes through the filter.
Cross Reference:​ Suitable for use in applications where 3M® Part number 9502+ KN95 has
been previously used.
Manufacturing Facility:​ KN95 (GB2626-2006) Manufactured in China
It’s the Mission of 1X Technologies LLC to provide electrical professionals with advanced products and knowledge that completely fulfills their
requirements. We offer value through speed, ingenuity, and the ability to provide unique solutions that others can’t. Our friendly, knowledgeable, and
professional staff will truly go the extra mile to help inspire, educate, and problem-solve for our customers. We’re Here Because You Require Quality,
Quickly!® Notes: 3M® is a registered trademark of 3M Company. 1XTech® KN95 Respirator is not manufactured by 3M. All orders are subject to 1X
Technologies Terms of sale.*Data provided on this page is nominal and subject to change.
​1xtechnologies.com
2