1. MARTIN JAMES
martinjames999@gmail.com
PH: 00971552300202
00971528226383
MUSSAFAH, ABU DHABI
Visa Status- Employment Visa
PERSONAL DATA:
Date of Birth : 25.06.1986
Gender : Male
Nationality : Indian
Marital Status : Married
LINGUISTIC PROFICIENCY:
Written Spoken
English : Very Well Good
Malayalam: Very Well Very Well
Hindi : Good Very Well
Tamil : Beginner Very Well
PERSONAL SKILLS:
Good communication skills
Dedicated to work
Leadership & team orientation
Good observation skills
Very good convincing power
Will lead a team with maximum
efficiency
Can motivate team members and
ensure the set goals are achieved
CURRICULUM VITAE
CAREER OBJECTIVE
To work in an environment of growth and excellence where I can prove
my skills and ability.
To be a successful entrant in carrying out tasks effectively in the
organization.
EDUCATION
M.Tech Production & Industrial Engineering [2011-2014] in Mar
Athanasius College of Engineering, Kothamangalam, Kerala [M.G.
University].
B.E. Mechanical Engineering [2004-2008] from Karpagam College of
Engineering, Coimbatore, Tamil Nadu [Anna University].
PLUS 2 [2002-2004] from HSE board of Kerala, India (Technical Higher
Secondary School), Muttom, Thodupuzha [I.H.R.D].
Secondary Education (10th
) [2002] from State Board of Kerala, India
(Technical Higher Secondary School), Muttom, Thodupuzha
[I.H.R.D].
ACADEMIC ACCOLADES
Organized an International Conference on Intelligent Systems and
Control named ISCO 2006 in Karpagam College of Engineering,
Coimbatore along with All India Council for Technical Education,
New Delhi.
WORK EXPERIENCE
March 2015 to Present_ Bond Interiors LLC _ A well known interior
designing company, expertise in turn key contracting and furniture
industry with more than 2800 workforce. My accomplishment as a
MEP Engineer is in the field of project execution.
March 2014 to July 2014 _ HLL Lifecare Limited _ A well known health
product company, expertise in male contraceptives with more than
2000 workforce. My accomplishments as a mechanical Maintenance
Engineer was within the preventive and breakdown maintenance area.
May 2008 to July 2011 _ Karpara Project Engineering Pvt. Ltd. _ A well
known contracting company, pioneer in thermal power plant projects
with more than 1200 workforce. My accomplishments as a
Construction Engineer were in the erection & commissioning of
thermal power plant.
Adapted to professionalism in the field of mechanical engineering
with the exposure to various managing tasks performed in the
fabrication, control line, fault finding, quality assessment, safety of
process and products while working in the thermal power plant.
Gained significant industrial experience by undertaking project
with the ACC Cements, Wadi, Karnataka & Madras Sugars,
Thirukkoilur, Tamil Nadu, and molded myself to managing projects
according to the situations.
Attained reasonable knowledge in the area of boiler, steam turbine,
2. EXTRA – CURRICULAR ACTIVITIES:
Published two papers on International
Journal of Engineering and Innovative
Technology (IJEIT).
Presented a paper in the International
Conference of Innovations in Design and
Manufacturing (iDeM’14) held at Mar
Athanasius College of Engineering,
Kothamangalam.
Worked as student guide in the college
for two years.
Member in engineering cricket team,
badminton & football team.
Trophy for the best leader of the class in
the higher secondary school.
Several prizes in the college and school
level in athletics and sports events.
Prizes for the quiz competition and other
cultural activities held at the school level.
Certificates obtained for high school level
competitions & got grades in various
scholarship exams since primary school
level.
LEISURE TIME ACTIVITIES:
Travelling
Swimming
Reading :–
Fictions,
Poetry,
Philosophy,
Psychology,
Travelogue,
History, etc.
Watching movies
Listening songs
ACCOMPLISHMENT
Strict adherence to discipline and dedication.
Enthusiastic and committed to maintain quality and efficiency.
Good organizational skills and optimistic character.
Participation in conducting internal audits.
Familiar with ISO 9001:2008 requirements.
Ensure dimensional stability as per drawing, materials
specification, heat numbers, mechanical properties as per drawing,
and material test certificate.
Calibration co-ordination.
Site inspection and respective documentation & control.
Co-ordination with client and sub-contractors.
Preparation and checking of data sheets, equipment layouts, piping
layouts and piping isometrics.
Occasional inspection of erection of work and co-ordination with
sites.
Material inspections- Pipes, fittings and valves, gaskets, bolts &
nuts, etc.
Responsible for assuring and controlling the work quality as per the
approved specification, drawings and international
standards/codes.
Day to day planning and co-ordination of QA/QC activities.
Controlling manpower.
Preparing daily site report and monitoring work progress.
Coordinate aspect of thermal engineering such as fabrication,
insulation & fitting as per contract.
Fit-up checking for various types of joints.
Weld visual inspection of piping/supports.
Grouting for base plate alignment in rotating equipments.
Turbo-Genarator alignment and commissioning.
Boiler drum and ESP erection.
High Pressure and Low Pressure pipe lines.
Maintaining norms according to labor and boiler act.
Inspection in precision equipments such as turbine, generator,
motors, etc.
Worked with an electroplating company and been a part of
3. SOFTWARE TOOLS
#1 SOLID WORKS #2 CAM #3 AUTOCAD #4 ANSYS
COMPUTER PROFICIENCY
Language : C, C++, Basic, FORTRAN, PLC, CNC, MatLab.
Application Software : MS Word/Excel/Power Point/ Photoshop, SPSS, Minitab, OriginPro, Tora.
Operating Systems : MS DOS, Windows 2000/XP/Vista/7/10.
PROFESSIONAL & ACADEMIC PROJECTS
PROJECT 1 TOPIC : Modification of Glass Fiber Reinforced Plastic (GFRP) by nanofillers
Description: The purpose of the project is to to enhance the mechanical properties of GFRP composites with
the nanofiller-modified polyester resin, at PS&RT Department, CUSAT, Kalamassery, Cochin.
PROJECT 2 TOPIC : Process Improvement for Reducing Critical Defects in Contraceptives
Description: The main objective of this study is to identify and eliminate critical defects and loss of trade by
the effective usage of the process of production in the company and to suggest counter measures, at HLL
Lifecare LTD., Peroorkada, Thiruvananthapuram.
PROJECT 3 TOPIC : Erection and Commissioning of 1 x 25 MW Steam Boiler, Turbine, and Auxiliary
Equipments
Description: The aim of the group project is to erect and commission the steam boiler, turbine, ESP and
Auxiliary equipments including pumps and motors, at Madras Sugars LTD., Thirukkoilur, Villupuram, Tamil
Nadu.
PROJECT 4 TOPIC : Erection and Commissioning of 2 x 25 MW STG Set in CPP Project
Description: The aim of the group project is to erect and commission the steam turbine and auxiliary
equipments including pumps and motors, at ACC LTD., Wadi Cements Works, Gulbarga, Karnataka.
PROJECT 5 TOPIC : Hydraulic Damper Test Rig
Description: The aim of the project was to test the performance of hydraulic dampers used in WAG-7
locomotives.
PROJECT 6 TOPIC : Foot Operated Washing Machine
Description: The objective of the project is to design, build and test a foot operated washing machine to
reduce the power consumption and cost by applying human effort.
ACADEMIC REFERENCE
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge.
Yours Truly,
Martin James.
Prof. Shanmuga Sundaram,
Mechanical Department,
Karpagam College of Engg.,
Coimbatore- 32, Tamil Nadu.
Prof. Mini P.G,
THSS, Muttom,
Thodupuzha,
Kerala.
Prof. Cijo Mathew,
MACE,
Kothamangalam,
Kerala.