2. Micrometers
436 OUTSIDE MICROMETERS
• The most popular micrometers used by skilled professionals worldwide
• Accurate, rugged, and easy to use
• Starrett satin chrome finish – no glare – resists rust
• Staggered lines and distinct figures for precise and
easy readability
• Balanced frame and thimble design ensure easy handling
• Tapered frame for use in narrow slots and tight places
• Quick and easy adjustment
• Micro-lapped measuring faces
• Extremely hard and stable one-piece spindle
263 MICROMETER HEADS
• Furnishedwith1/2"(12.7mm)diameterclampingsurface
• No glare satin chrome finish
• Reading surfaces: satin-finish
• Graduations: .001" (0.01mm)
• Models with lock nut, plain thimble, or ratchet and
lock nut
263RL
440 DEPTH MICROMETERS
• The depths of holes, slots, shoulders and projections can be measured with these fine tools
• 2-1/2" (63.5mm) base and 1/8" (3.2mm) diameter measuring rods
• Combination ratchet and speeder for uniform pressure and quicker adjustment
• Ring-type knurled lock nut for quick and sure locking
T230 OUTSIDE MICROMETER
• Extremely hard and stable one-piece spindle
• Advanced sleeve design with staggered lines and
distinct figures for precise and easy readability
• Balanced frame and thimble design ensure easy
handling and better readability
• Gracefully designed tapered frame for use in
narrow slots and tight places
Cat. No. EDP Range Graduations Sale Price
436.1RL-1 67993 0-1" .001" 123.50
436.1RL-2 68002 1-2" .001" 147.25
436.1RL-3 68010 2-3" .001" 184.30
436.1RL-4 68017 3-4" .001" 203.30
436.1RL-5 68023 4-5" .001" 221.35
436.1RL-6 68029 5-6" .001" 239.40
436.1XRL-1 67994 0-1" .001" 123.50
436.1XRL-2 68003 1-2" .001" 147.25
436.1XRL-3 68011 2-3" .001" 184.30
Cat. No. EDP Range Sale Price
263P 51251 0-1" 82.65
263L 51253 0-1" 88.35
263RL 51254 0-1" 92.15
263MP* 51275 0-25mm 82.65
263MRL* 51257 0-25mm 92.15
* 0-25mm models specify clamping diameter 12 or 12.7mm sent unless otherwise ordered.
Cat. No. EDP Range Function Sale Price
440Z-3L 52113 0-3" Speeder 229.90
440Z-3RL 52115 0-3" Ratchet/Speeder 234.65
440Z-6RL 52119 0-6" Ratchet/Speeder 280.25
440Z-9RL 52123 0-9" Ratchet/Speeder 351.50
440Z-3RL
Cat. No. EDP Range Resolution Sale Price
T230XRL 50944 0-1" .0001" 205.20
436.1RL-2
2 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
3. Micrometers
New!T444 OUTSIDE MICROMETERS
• No-glare satin chrome finish
which resists rust
• Advanced sleeve design with staggered lines and
distinct figures for precise and easy readability
• Balanced frame and thimble design to ensure easy
handling and better readability
• Insulated frame for prevention of temperature
related expansion and contraction
• Provides quick and easy adjustment
• Reading in ten-
thousandths of an
inch (.0001") with
a vernier scale on
the sleeve
445 DEPTH MICROMETERS
• Depths of holes, slots, shoulders and projections
can be measured to .001" (0.01mm)
• Furnished with choices of 3" (75mm), 4" (100mm),
and 6" bases and have 5/32" (4mm) diameter
measuring rods
• Combination ratchet and speeder for uniform
pressure and quicker adjustment
• Ring-type lock nut for quick and sure locking
Cat. No. EDP Range Graduations Sale Price
T444.1XRL-1 52083 0-1" .0001" 98.80
T444.1XRL-2 52084 1-2" .0001" 115.90
T444.1XRL-3 52085 2-3" .0001" 128.25
T444.1XRL-4 52086 3-4" .0001" 148.20
T444.1XRL-5 52087 4-5" .0001" 160.55
T444.1XRL-6 52088 5-6" .0001" 178.60
T444.1XRL-3
Cat. No. EDP Range Sale Price
445AZ-6RL 52212 0-6" 284.05
445AZ-9RL 52216 0-9" 351.50
445BZ-6RL 52224 0-6" 297.35
445BZ-9RL 52228 0-9" 370.50
445AZ-6RL
486 BLADE TYPE MICROMETERS
• The blades are.030" (0.8mm) thick
• Blades will measure to 5/16" (8mm) depths
• Balanced frame and thimble design ensure easy
handling and better readability
• Speeder for quicker adjustment on all sizes
486P-5
Cat. No. EDP Range Sale Price
486P-5 52507 4-5" 447.45
486P-6 52509 5-6" 531.05
486P-7 67094 6-7" 698.25
795.1 IP67 ELECTRONIC OUTSIDE
MICROMETERS WITH OUTPUT
• IP67 protection against coolants,
water, chips, dust and dirt often found
in machine shop environments
• Balancedframeforcomfortableandaccuratemeasuring
• Starrett No-glare satin chrome finish on thimble
and sleeve minimizes annoying surface glare
under bright lights indoors or filters out UV light
• Large,easy-to-read,high-contrastLCDdigitalreadout
• Spindle lock
• Micro-lapped carbide measuring faces
• SPC output capability
795.1XFL-1
Cat. No. EDP Range Resolution Accuracy Sale Price
795.1XFL-1 01100 0-1" .00005" ±.0001" 236.55
795.1XFL-2 01101 1-2" .00005" ±.0001" 270.75
795.1XRL-1 01108 0-1" .00005" ±.0001" 236.55
795.1XRL-2 01109 1-2" .00005" ±.0001" 270.75
3starrett.com
4. Micrometers
823 TUBULAR INSIDE MICROMETERS
• Rods are rigid and lightweight
• 5-1/2" (140mm) long handle furnished
• Each rod is marked with length
• Hardened and ground anvils
• Interchangeable anvils
• Quick reading figures
• Extension rods are made of steel tubing
796.1 IP67 ELECTRONIC OUTSIDE
MICROMETERS
• IP67 protection against coolants,
water, chips, dust and dirt often found
in machine shop environments
• Balancedframeforcomfortableandaccuratemeasuring
• Starrett no-glare satin chrome finish on thimble
and sleeve minimizes annoying surface glare under
bright lights indoors or filters out UV light
• Large,easy-to-read,high-contrast LCD digital readout
• Spindle lock
• Micro-lapped carbide measuring faces
796.1XFL-1
3732 ELECTRONIC MICROMETERS
• Balanced frame design for comfortable and
accurate measuring
• Large,easy-to-read,high-contrastLCDdigitalreadout
• No-glare black wrinkle finish on frame
• Hard and stable one-piece friction thimble permits
one-hand operation of micrometer and uniform
contact pressure
3732XFL-1
823CZ
Cat. No. EDP Range Graduations # of Rods Movement Of Screw Sale Price
823AZ 53050 1 1/2-8" .001" 5 1/2" 289.75
823BZ 53052 1 1/2-12" .001" 8 1/2" 354.35
823CZ 53054 4-24" .001" 7 1" 446.50
823DZ 53055 4-32" .001" 8 1" 494.00
823EZ 53056 4-40" .001" 10 1" 547.20
823FZ 53058 1 1/2-32" .001" 10 1/2" and 1" 678.30
823MAZ 53051 40-200mm 0.01mm 6 13mm 307.80
823MBZ 53053 40-300mm 0.01mm 8 13mm 371.45
823MEZ 53057 100-1000mm 0.01mm 10 25mm 546.25
Cat. No. EDP Range Resolution Accuracy Sale Price
796.1XFL-1 01104 0-1" .00005" ±.0001" 170.05
796.1XFL-2 01105 1-2" .00005" ±.0001" 227.05
796.1XRL-1 01116 0-1" .00005" ±.0001" 170.05
796.1XRL-2 01117 1-2" .00005" ±.0001" 227.05
Cat. No. EDP Range Resolution Accuracy Sale Price
3732XFL-1 12268 0-1" 0.00005" ± 0.0001" 129.20
3732XFL-2 12269 1-2" 0.00005" ± 0.0001" 174.80
3732XFL-3 12270 2-3" 0.00005" ± 0.0001" 223.25
3732XFL-4 12271 3-4" 0.00005" ± 0.00015" 248.90
4 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
5. SlideCalipers
New!
125 VERNIER CALIPERS
• High quality, basic vernier caliper that offers inch
and metric measurement
• Lock screw for sliding jaw
• Hardened stainless steel depth rod
• Sharp, black graduations on the satin finished bar
799 ELECTRONIC CALIPERS
• Lightweight, ergonomic design
• Last measuring position retained when shut off
• Large,easy-to-read,high-contrast LCD digital readout
• Inch/millimeter conversion reads .0005" or 0.01mm
3202 SLIDE CALIPERS
• Providesquick,accuratemeasurement
of O.D.and depth
• Sharp, clear dial graduations
• Sharp, black graduations on satin finished bar
• Hardened stainless steel
• Lock screws for sliding jaw and dial bezel
798 ELECTRONIC CALIPERS
• IP67 level of protection against
coolant, dirt and dust
• Fine adjustment
• Hardened stainless steel measuring surfaces
• Large,easy-to-read,high contrast LCD digital readout
798A-6/150
799A-6/150
Cat. No. EDP Range Resolution Sale Price
798A-6/150 20798 6" .0005" 194.75
798A-8/200 20799 8" .0005" 247.95
798A-12/300 20800 12" .0005" 368.60
798B-6/150 12521 6" .0005" 233.70
798B-8/200 12523 8" .0005" 283.10
798B-12/300 12525 12" .0005" 420.85
798BX-6/150 12782 0-6" .0005" 328.70
Cat. No. EDP Range Resolution Sale Price
799A-6/150 67410 0-6" .0005" 148.20
799A-8/200 67412 0-8" .0005" 209.00
799AZ-24/600 11978 0-24" .0005" 704.90
799AZ-40/1000 11979 0-40" .0005" 1,413.60
Cat. No. EDP
Range
Sale Pricein mm
125MEA-6/150 61660 0-6 0-150 97.85
125MEA-8/200 61882 0-8 0-200 114.95
125MEA-12/300 61886 0-12 0-300 206.15
Cat. No. EDP Range Graduation Sale Price
3202-6 61467 0-6" .001" 95.95
3202-8 61468 0-8" .001" 135.85
3202-6
5starrett.com
6. Indicators
647 DIAL COMPARATOR
• Effective non-shock mechanism
• Pinions and shafts of the movement are jeweled
• After removal of the safety cap the adjustment
screw on top of the case allows simple and safe zero
setting of the instrument over the total measuring
• A safety cap prevents unintentional turning of the
fine adjustment screws
25 DIAL INDICATORS
• Rugged and simple unit construction with a
"universally fitting" design
• Sharp bezel serrations for positive grip
• Unbreakable crystal
• Hardened stainless steel stem
• No-glare satin finish on case
• Hardened stainless steel
rack and spindle
• Massive bridge for rigid
bearing support
• Hardened stainless steel
gears and pinions
• Non-reflecting white
eggshell finish on dial
• Jewel Bearings
647
196 UNIVERSAL BACK PLUNGER DIAL INDICATORS
• One of the most versatile indicators available
• Accurate and reliable
• Simple to operate
• Range: .200" (5mm)
• Graduations: .001" (0.02mm)
196A1Z
25-141J
Cat. No. EDP Dial Reading Range Grads Sale Price
25-141J 53240 0-50-0 .250" .001" 140.60
25-341J 53287 0-50-0 1.000" .001" 140.60
25-441/5J 53293 0-100 .500" .001" 140.60
25-441J 53295 0-100 1.000" .001" 140.60
25-631J 53304 0-50 1.000" .0005" 162.45
25-2041J 53309 0-100 2.000" .001" 272.65
Cat. No. EDP Range Graduation Reading Sale Price
647 00001 .004" .00005" 20-0-20 211.85
647M 00002 0.1mm 0.001mm 50-0-50 211.85
Cat. No. EDP Reading Sale Price
196A1Z 50697 0-100 229.90
196MA1Z 65251 0-100 Yellow dial face 237.50
196MB1 65252 0-100 Yellow dial face 153.90
657D MAGNETIC BASE
• Designed to hold lug and center back indicators
• Three precision ground magnetic contact surfaces
(plus V-step)
• Powerful, permanent magnetic base hold firmly
to steel or iron surfaces - horizontally, vertically,
upside-down
• The swivel post assembly on these holders
provides universal adjustment in both horizontal
and vertical planes
• Includes magnetic base with attachments: swivel
post snug and
gage holding rod
Cat. No. EDP Sale Price
657D 52749 208.05
6 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
7. Indicators
657T AND 657TW MAGNETIC BASE
• For use with all StarrettTest,
AGD, Dial and Miniature
Dial Indicators
• Accommodates similar
indicators of other
manufacturers
• IncludesFlex-O-Postassembly
• Flexible post can be
adjusted to any position and
locked by turning a lever
657T
Cat. No. EDP Sale Price
657T 52760 248.90
657TW 52761 293.55
New!659A HEAVY DUTY MAGNETIC BASE
• Has approximately twice the holding
power of our 657 Magnetic Base and has a rotary
on/off switch
• Post snug with two 3/4" / 19mm holes positions
the dial indicator at any
height, vertical angle
and allows for 360
degree rotation of the
gage rod
• Includes magnetic base,
upright post assembly
including post, snug,
gage rod with clamp and
find adjust, and thread
adaptor without case
Cat. No. EDP Sale Price
659A 56687 518.70
660 MAGNETIC BASE
• Compact and versatile,with three adjustable pivots
controlled by a single knob for fast, easy indicator
positioning
Cat. No. EDP Sale Price
660 68621 114.95
S668 SHAFT ALIGNMENT CLAMP
• Lightweight clamp design made of black anodized
aluminum
• Rigid 3/8" diameter stainless steel indicator posts
provided in three lengths (5", 7-7/16", and 9")
• Extension plate allows for added radial clearance
• Heavy-duty roller chain can accommodate up to a
7-1/2" diameter shaft
• Set comes with two Starrett Indicators
• Excess roller chain can be secured to the side of
the chain clamp
• A second shaft alignment clamp can be mounted
across from the first clamp to act as a vertical
"target" for face alignment
Cat. No. EDP Indicators Sale Price
S668CZ 67152 196B5 859.75
S668DZ 67153 81-141J 926.25
668CZ
696Z CRANKSHAFT DISTORTION DIAL/STRAIN GAGE
• The dial indicator movement is approximately
5/32" (4mm)
• There are 10 rods and one extension furnished
• Rods are marked to designate the approximate
overall length of the gage
• Movable bezel adjusts the dial in relation to the hand
• Non-breakable crystal
• Gage is used by their inspectors to check the
distortion of engine
shafts and frames
Cat. No. EDP Range Sale Price
696Z 52901 2 3/8"-18" (61-458mm) 570.00
7starrett.com
8. Indicators
F2730IQ, F2740IQ, F2750IQ INDICATORS
• Rugged, sealed enclosures as standard
• American designed and manufactured
• Power with Batteries
• AdditionalPowerOptionsThroughACJackorDataOutput
• Programmable Lock Combination
• User Tolerance Settings
(high and low)
• Up to 4 User
Changeable Resolutions
• Large LCD Display
• Maximum Reading Hold
• Display / Freeze Reading
Hold
• Minimum Reading Hold
1175Z DIAL INDICATOR GROOVE GAGE
• The reference jaw can be mounted in two positions
on the range adjusting bar
• Adjustable bar for greater or lesser range
• A fine adjustment screw and a lock provided
• Two sets of jaws, both readily interchangeable
• Three sets of contacts (Styles 1-10, 2-10, 2-20)
• Contacts can be attached to the jaws without
replacing the jaw.
• Contact ends are flush for blind hole gaging
• Hardened steel contacts with hard chrome finish
Cat. No. EDP Range Grads Sale Price
1175Z 53173 .375"-6" .0005" 1,885.75
711LCSZ LAST WORD TEST INDICATOR
• Their small size and variety of attachments will
handle all jobs with ease and accuracy
• Shaded dial – for use with a mirror, in a jig bore
application, the operator will always know the
correct reading
• Variety of attachments available to suit the application
• Hard chrome-plated ratchet contact point
• Smooth, jeweled lever action
• Swiveling tubular body
• Positive reversing switch
• Indicator
complete with
all attachments
Cat. No. EDP Sale Price
711LCSZ 52957 $242.25
1010 DIAL INDICATOR POCKET GAGES
• Throat depth ranges from1/2" (12.7mm) down to
5/16" (8mm)
• Models are available with rounded contacts
• The diameter of both the flat or round contacts are
1/4" (6.3mm)
• Gage has a small count hand for recording each
revolution of large hand
• Chrome plated case, unbreakable crystal dial cover
1010Z
Cat. No. EDP Range Graduation Contacts Sale Price
1010Z 53114 .375" .001" Flat 298.30
1010EZ 53115 .375" .0005" Flat 316.35
1010MZ 53116 9mm 0.01mm Flat 328.70
F2730IQ
Cat. No. EDP Range Resolution Sale Price
F2730IQ 49509 1" (25mm) .00005" (0.001mm) 479.75
F2740IQ 49510 2" (50mm) .0001" (0.002mm) 723.90
F2750IQ 49511 4" (100mm) .0001" (0.002mm) 1,096.30
8 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
9. Indicators
New!2900 ELECTRONIC INDICATORS
• True Absolute Sensor Technology - remembers position and zero set point even
during battery replacement. Cannot be "over-sped" into failure.
• Intuitive design and layout - easy to learn and use
• Positive, tactile-feel button activation
• IP67 protection against dirt, dust, water and coolant to withstand hostile shop
environments
2900-1
Cat. No. EDP Range Resolution Accuracy Sale Price
2900-1 09980 .5" .00005" ±.00012" 297.35
2900-2 09981 .5" .0001" ±.00012" 268.85
2900-4 09983 .5" .0005" ±.001" 381.90
2900-6 09985 .5" .0005"/.0001"/.0005" ±.00012" 451.25
2900-3-1 09963 1" .0005" ±.001" 268.85
2900-5-1 09967 1" .0005" ±.001" 381.90
New!
New!
3670 DIAL INDICATOR STANDS
• Designed for comparison measurements using a dial indicator or digital indicator
• Vertical fine adjustment is standard on all models
• Rugged bracket holds indicator firmly in place
• Can be used with any AGD dial or digital indicator
• Furnished with a serrated or flat anvil which is ground and lapped and removable
3808, 3809, 3908 AND 3909 DIAL TEST INDICATORS
• Three dovetail positioning mounts work with most existing test indicator accessories
• Precision gear-driven design with smooth, jeweled movement
• Contact point reverses automatically, always maintaining clockwise hand rotation
• Contacts are frictionally adjustable and replaceable
3671
Cat. No. EDP Description Sale Price
3671 69901 Stand with round flat anvil 484.50
3672 69902 Stand with round serrated anvil 484.50
3673 69903 Stand with square serrated anvil 484.50
Cat. No. EDP Range Graduation Reading Sale Price
3808A 12331 .008" .0001" 0-4-0 139.65
3808AC 12303 .008" .0001" 0-4-0 193.80
3809A 12333 .030" .0005" 0-15-0 91.20
3809AC 12305 .030" .0005" 0-15-0 133.00
3908A 12488 .008" .0001" 0-4-0 150.10
3908AC 12636 .008" .0001" 0-4-0 203.30
3909A 12527 .030" .0005" 0-15-0 100.70
3909AC 12669 .030" .0005" 0-15-0 142.50
3808A
Indicator not included
9starrett.com
11. SR100 SURFACE ROUGHNESS TESTER
The SR100 Surface Roughness Tester is powerful, accurate and easy
to use. It is ideal for checking large components, structures, auditing
batch prior to shipment and production line
process control.
PRICE $1,550.40
SR300 AND SR400 SURFACE ROUGHNESS TESTER
The SR300 Surface RoughnessTester is a full-featured,powerful and
versatile surface roughness tester. It can be used either freestanding
or bench mounted with fixturing for batch measurement and
laboratory applications.
SR300 PRICE $2,845.25
SR400 PRICE $3,610.00
WATCH OUR INFORMATIONAL VIDEOS TO LEARN MORE
ABOUT OUR SURFACE ROUGHNESS TESTERS!
12. DepthandHoleGages
3753 ELECTRONIC DEPTH GAGE
• Clear, easy-read numbers, properly sized for the tool
• Hardened stainless steel body and slide for long life
• Fine adjustment thumb roll for precision measurements
• Lock to hold the slide in position
3753A-8/200
643JZ DIAL DEPTH GAGE
• Hardened, ground needle point contact
• Knife-edge base which can be precisely positioned for close work
• Point is 1/2" (17.7mm) long with a 40 degree included angle
• Case is included
• 0-.125" Range
• .0005" Graduation
• 0-25-0 Dial Reading
829 HOLE GAGES
• Ideal for accurately measuring small holes, slots, grooves, and recesses
• Precision Ground Radius on each gage provides two-point contact for
maximum accuracy
• Well balanced
• More accurate measurements
• Hardened-ball measuring surface with two-point contact
• Full-ball gages
• Smooth, sensitive adjustment
Cat. No. EDP Range Resolution Accuracy Sale Price
3753A-6/150 12258 0-6" .0005" ±.001" 267.90
3753A-8/200 12259 0-8" .0005" ±.001" 279.30
3753B-6/150 12690 0-12" .0005" ±.001" 333.45
Cat. No. EDP Range Resolution Accuracy Sale Price
643JZ 52714 0-12" .0005" ±.001" 372.40
Cat. No. EDP Range Sale Price
S829EZ 53074 .125-.5" 154.85
12 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
13. BoreandHoleGages
New!84A DIAL BORE GAGES
• Can be easily held to inspect
bores and hole sizes without
removing the workpiece
• Adjustable range screw and two
centralizing plungers provide accurate,
three-point contact for alignment in
larger bores
• All contacts and centralized plungers
are of hardened tool steel for wear and
spring-loaded for sensitivity
• The housing and knurled handle are
aluminum for light weight and good
balance
• Furnished in finished wood case
3089 DIAL BORE GAGES
• All anvils laser marked for easy selection
• Gage chart for quick and easy anvil
selection
• Includes sturdy aluminum case with cut
outs for gage and all accessories
• Ergonomic design with non-slip
insulating grip
• Resolution: .0005"
780 ELECTRONIC BORE GAGES
• Wide measurement range without
changing anvils
• Carbide measuring faces on sizes
1/2" (12.5.mm) diameter
• Extension available for deep holes
• Precision ratchet stop provides correct contact
pressure for accurate readings
• Resolution: .00005" (0.001mm)
• Large high-contrast LCD digital readout is easy to
read and reduces error
3089Z-131-715J
78 BORES GAGES
• Wide measurement range without changing anvils
• Tungsten carbide measuring faces
• Ratchet stop
• Self-centering contacts
• Blind bore measuring capability
• Extensions available up to 6" (150mm)
• Setting rings included
• Furnished in a case, complete with setting ring,
contacts, wrenches, and instructions
78XTZ-2
Cat. No. EDP Range Grads Bore Depth Sale Price
78XTZ-750 68133 5/8 - 3/4" .00025" 2-7/16" 638.40
78XTZ-1 68134 3/4 - 1" .00025" 2-5/8" 720.10
78XTZ-2 67675 1-3/8 - 2" .00025" 3-1/16" 1,018.40
78XTZ-258 67676 2 - 2-5/8" .00025" 3-1/16" 1,251.15
78XTZ-5 67679 4 - 5" .00025" 4" 1,729.00
S78XTEZ 67683 3/4 - 2" .00025" 2-5/8"-3-1/16" 2,823.40
S78XTFZ 67684 2 - 4" .00025" 3-1/16 - 4" 3,837.05
Cat. No. EDP Range Accuracy Sale Price
780XTZ-312 12021 1/4"-5/16" ±.00015" 1,848.70
780XTZ-375 12022 5/16"-3/8" ±.00015" 1,855.35
780XTZ-500 12024 3/8"-1/2" ±.00015" 1,828.75
780XTZ-625 12025 1-2"-5/8" ±.00015" 1,849.65
780XTZ-750 12026 5/8"-3/4" ±.00015" 1,896.20
780XTZ-1 12027 3/4"-1" ±.00015" 2,220.15
780XTZ-138 12028 1-1-3/8" ±.00015" 2,622.00
780XTZ-2 12029 1-3/8"-2" ±.00015" 2,590.65
780XTZ-258 12030 2-2-5/8" ±.00020" 2,955.45
780XTZ-314 12032 2-5/8"-3-1/4" ±.00020" 2,879.45
780XTZ-4 12033 3-1/4"-4" ±.00020" 3,201.50
780XTZ-5 12034 4"-5" ±.00025" 3,334.50
780XTZ-6 12035 5"-6" ±.00025" 3,444.70
780XTZ-9 12038 8"-9" ±.00030" 4,847.85
S780XTCZ 12044 1/4"-3/8" ±.00015" 2,562.15
S780XTDZ 12045 3/8"-3/4" ±.00015" 3,096.05
S780XTEZ 12046 3/4"-2" ±.00015" 4,056.50
S780XTFZ 12047 2"-4" ±.00020" 4,635.05
S780XTKZ 12049 4"-6" ±.00025" 3,984.30
780XTZ-312
Cat. No. EDP Range Sale Price
3089Z-131-715J 12456 0.7"-1.5" 223.25
3089Z-131-1424J 12457 1.4"-2.4" 223.25
3089Z-131-26J 12458 2"-6" 248.90
Cat. No. EDP Range Bore Depth Sale Price
84AZ-111-4J 00026 1-1/2-3" 3" 1,028.85
84AZ-111-5J 00027 3-5-1/16" 6" 1,014.60
84AZ-134-5J 00031 3-5-1/16" 6" 976.60
84AZ-111-6J 00028 5-8" 6" 1,127.65
84AZ-134-6J 00032 5-8" 6" 1,026.00
84AZ-111-7J 00029 8-12-1/2" 7" 1,289.15
84MAZ-181-4J 00038 3.175-76.2mm 75mm 1,049.75
84MAZ-161-5J 00035 76.2-128.58mm 150mm 1,023.15
84AZ-111-5J
13starrett.com
14. GageAmpsandTesters
New!
New!
SR100 SURFACE ROUGHNESS TESTER
• Measures basic Ra, Rz and advanced Rp,Rv and
Rt parameters
• Switches between inch and metric mode
without remeasuring
• Automatic shut-off after five minutes of inactivity
• Uses CR2450 batteries
• Two-piece assembly,calibration
standard, batteries, operation
guide and a carrying case
• Infra-red (IrDA) link provides
remote, cable free operation
up to a distance of 40"
SR300 AND SR400 SURFACE
ROUGHNESS TESTER
• Large screen display
• Unique stylus lift mechanism for total flexibility
• Many application specific parameter options
• Comprehensive selection optional accessories
and pickups
• Long traverse length and extended pickup reach
• Stores of up to 100 readings
3810A DIGITAL PORTABLE HARDNESS
TESTER
• Combines fast test speeds coupled with ample
memory and output
• Performs tests that easily convert to most popular
hardness scales such as Rockwell, Brinell, Vickers
and Shore
• Designedtotestthehardnessoflarge,hardmetalparts
• USB output
• Automatic conversions to
Rockwell Brinell, Vicker
and Shore
• Automatic mean value as
well as Min and Max values
3812 ULTRASONIC THICKNESS GAGE
• Menu-driven, multi-functional tester with basic
measurement capabilities
• Measures the thickness of metallic and non-
metallic materials such as aluminum, titanium,
plastics, ceramics and glass
• Accurately display readings
in inch or millimeter
• Ideal for measuring a
wall thickness that would
be difficult to gage with
conventional hand tools
3811A COMPACT HARDNESS TESTER
• Combines fast test speeds coupled with ample
memory and output
• Performs tests that easily convert to most popular
hardness scales such as Rockwell, Brinell, Vickers
and Shore
• Designedtotestthehardnessoflarge,hardmetalparts
• USB output
• Automatic conversions to
Rockwell Brinell, Vicker
and Shore
• Automatic mean value as
well as Min and Max values
3814 ANALOG BENCH HARDNESS TESTER
• Ability to handle Rockwell
Scales A through H and K
• Stable cast iron construction
• Ideal basic hardness testing
for many typical applications
SR300
Cat. No. EDP Sale Price
SR100 20950 1,550.40
Cat. No. EDP Sale Price
SR300 21000 2,845.25
SR400 21001 3,610.00
Cat. No. EDP Sale Price
3810A 69871 2,101.40
Cat. No. EDP Sale Price
3811A 69881 1,722.35
Cat. No. EDP Sale Price
3812 67668 1,116.25
Cat. No. EDP Sale Price
3814 67754 2,653.35
14 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
15. PrecisionRulesAndAngleMeasurement
C305 PRECISION RULES
• Full-Flexible
• Satin chrome finish
• Quick Reading
• 1/2" wide
• Rules with single row of inch figures (all rules under 1" width)
C604R PRECISION RULES
• Spring-Tempered
• Satin chrome finish
• Quick Reading
• Rules with double row of inch figures, and each
edge represents the bottom edge reading left to
right (rules 1" and wider)
154 ADJUSTABLE PARALLELS SET
• Adjustable feature makes it possible to adjust to exact size by micrometer measurement and also permits
use in place of several solid-type parallels
• These parallels are useful as gages in checking the size of slots and openings
• Convenient for use in machine vises, for leveling or adjusting work on setups of milling and grinding machines,
shapers, planers and drill presses
• Parallels slide smoothly and can be easily adjusted
• All parallels are 9/32" (7mm) thick
S154LZ
C305R-6
C604R-6
Cat. No. EDP Range Thickness Description Sale Price
S154SZ 50584 3/8" - 1-5/16" 9/32" (7mm) Set of 4 parallels and case 144.40
S154LZ 50586 3/8" - 2-1/4" 9/32" (7mm) Set of 6 parallels and case 243.20
Cat. No. EDP Description Graduations Sale Price
C305R-6 51347 6" full-flexible steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 22.33
C305R-12 51348 12" full-flexible steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 45.60
C305R-24 51350 24" full-flexible steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 100.70
Cat. No. EDP Description Graduations Sale Price
C604R-6 52678 6" spring-tempered steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 22.33
C604R-12 52679 12" spring-tempered steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 37.53
C604R-18 52680 18" spring-tempered steel 72.20
C604R-24 52681 24" spring-tempered steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 94.05
15starrett.com
16. FixedGageStandards
270 TAPER GAGE
• Very useful tool for bearing work and for gaging slots
• Made of quality tool steel and accurately
tapered throughout entire length for quick and
convenient measuring
• 7/16" (11mm) wide by 6-1/4" (160mm) long
• Can be used as a precision shim
• One side graduated from .010" to .150" in
thousandths of an inch; the reverse side from
0.3mm to 4mm in one-twentieth of a mm (0.05mm)
467 INCH READING THICKNESS GAGE
• Compact steel case
• Locking device to lock any leaf or leaves in position
• 13 leaves ranging from .0015 to .200" thickness
• Tempered steel
• Straight leaves
66 THICKNESS GAGE
• Tempered-steel,carefullyfinishedtocorrectthickness
• Individually tested and marked with thickness
• Leaves easily removed or replaced
• Rugged, substantial steel case protects leaves
• Straight Leaves
• Leaves made of finest tempered-steel
• Locking device
245 ENGINEERS' COMBINATION TAPER, WIRE AND
THICKNESS GAGE
• Compact steel case
• Locking device to lock any leaf or leaves in position
• English Standard wire gage, sizes numbered from
19-36 (.042-.004"), plus two additional sizes,
1-16" and 1/8"
• The reverse side has decimal equivalents
in thousandths
• Has eleven thickness or feeler leaves
66
Cat. No. EDP Description Sale Price
270 51292 English/Metric 109.25
Cat. No. EDP Description Sale Price
467 52464 Inch reading thickness gage,13 leaves 89.30
Cat. No. EDP Leaves Range Sale Price
66 50314 26 Straight, English .0015 - .025" 57.95
66T 50315 26 Tapered, English .0015 - .025" 64.60
66B 57097 31 Straight, English .0015 - .025" 64.60
66MA 55974 20 Straight, Metric 12.7 - 77mm 57.95
Cat. No. EDP Description Sale Price
245 51170
With taper gage, English standard
wire gage and 9" reading thickness
gage leaves
150.10
245M 51171
With taper gage, English standard
wire gage and 11mm reading
thickness gage leaves
172.90
245
16 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
17. FixedGageStandards
666 THICKNESS GAGE "FEELER STOCK" IN ROLLS
• In a compact, sturdy plastic rewindable dispenser case. This case handles stock up to .015" and 0.35mm only.
• Roll stock in thickness of .016" or 0.40mm and over is furnished in 20' or 6m (non-dispensable) rolls in
cardboard box
• Housed in convenient, rewindable dispenser rolls
• Handy 25' and 7.6m rolls 1/2" and 12.7mm wide
579 TELESCOPING GAGE SETS
• Precision ground radius on each gage provides
two-point contact
• Constant spring tension
• Lockable
• Handles are attached to the contact plungers and
automatically self-center
• Two telescoping contacts
806 THICKNESS GAGE HOLDERS
• Stock up to 6" (150mm) is inserted in the holder
and gripped in the desired position by a cam lock
• Can be snipped off and new stock pulled out until
used up
• Dull nickel finish
• 806D Clamps have contrasting finish to eliminate
the possible confusion on which end holds the
thicker or thinner stock
806D
S579GZ
Cat. No. EDP Range Description Sale Price
S579GZ 52616 5/16" - 2-1/8" Set of 4 gages and case 140.60
S579HZ 52617 5/16" - 6" Set of 6 gages and case 243.20
Cat. No. EDP Description Gages Sale Price
806 53039 Single Holder 26 27.55
806D 53040 Double holder 26 30.88
Cat. No. EDP Thickness Sale Price
666-1/2 64210 .0005" 228.95
666-1 52796 .001" 96.90
666-1 1/2 52797 .0015" 49.40
666-2 52798 .002" 49.40
666-3 52800 .003" 52.25
666-4 52801 .004" 36.10
666-5 52802 .005" 36.10
666-6 52803 .006" 36.10
666-10 52807 .010" 32.78
666-15 52812 .015" 32.78
666M-3 52823 0.03mm 109.25
666M-5 52825 0.05mm 57.95
666M-10 52828 0.10mm 43.70
666-1
17starrett.com
18. PrecisionShopTools 91 TAP WRENCH
• Strong and well-proportioned
• Tempered gripping surfaces firmly hold square or round shanks
• Plunger operated by knurled sleeve
• Spring inside sleeve causes plunger to back off when pressure is removed
• Round shanks can be gripped, but care must be used. Excessive pressure may break the movable V-jaw
18 AUTOMATIC CENTER PUNCHES
• All-steel handles and parts
• Automatically strikes a blow when downward
pressure is applied
• Spring tension
• The point can be easily be replaced
• Adjustable cap regulates the force of action
818 AUTOMATIC CENTER PUNCH
• Full-Flexible
• Satin chrome finish
• Quick Reading
• 1/2" wide
• Rules with single row of inch figures
(all rules under 1" width)
93 TAP WRENCH
• For holding taps, drills, reamers and small tools
• Properly centered
• Wrenches have sliding handle
• Designed to hold square shanks
565 DRIVE PIN PUNCH
• Hardened and tempered steel
• Knurled grip
• Punch material available in hardened/
tempered steel and brass
• Round and square shanks available
• Available tips include center, prick and
drive pin
• Tip diameters range from 1/32" to 38"
18C
91B
Cat. No. EDP Body Length Diameter Sale Price
18A 50120 5" (125mm) 9/16" (14mm) 38.00
18AA 50119 4" (100mm) 7/16" (11mm) 34.20
18C 56757 5 1/4" (130mm) 11/16" (17mm) 46.08
Cat. No. EDP Body Length Diameter Sale Price
818 53048 5" (130mm) 5/8" (16mm) 33.73
Cat. No. EDP Capacity Tap Size Body Length Sale Price
93C 50429 1/4-1/2" (6.4-12.7mm) 3-1/2" (90mm) 45.13
Cat. No. EDP Capacity Tap Size Body Length Square Shank Sale Price
91A 50419 1/16-1/4" (1.6-6.35mm) 6" (150mm) 3/32-5/32" (2.4-4mm) 45.60
91B 50420 3/16-1/2" (4.7-12.7mm) 9" (225mm) 5/32-9/32" (4-7mm) 66.50
91C 50421 1/4-5/8" (6.35-16mm) 12" 300mm 5/32-3/8" (4-9.5mm) 107.35
91D 50422 5/16-3/4" (8-19mm) 16" 400mm 13/64-7/16" (5.2-11mm) 142.50
Cat. No. EDP
Length Diameter Punch
Sale Pricein mm in mm
565A 52578 4 100 1/16 1.5 5.70
18 Prices effective April 15 - June 30, 2015 | Specifications subject to change.
19. PrecisionShopTools
828 WIGGLER OR CENTER FINDER WITH ATTACHMENTS
• Working centers can be quickly and accurately located
• Spring tension on the ball of the point permits guiding point
to concentricity
• Ball Contact 828B is useful in locating work by first bringing
the contact (ball diameter .250" or 6.35mm) against the work
• DiscContact.100"(2.54mm)
diameter, permits use in
more confined areas such
asslotsorshallowholes
• Offset Indicator Holder
can be used with Starrett
Test Indicators
98 MACHINISTS' LEVEL WITH GROUND AND
GRADUATED VIALS
• This level has ground and graduated main vial
• The base of the level feature an involute
groove running the length of the base,which
provides a reliable seat for round work
• The vial is adjustable to a positive setting
and is housed in a satin finished brass
tube with a friction-fit closing cover to
prevent breakage
• Wood case
827 EDGE FINDER
• Single End
• Work surfaces may be located easily, quickly and accurately
with these edge finders
• Flats, straight edges, shoulders, grooves, round work, studs,
dowels,center points and scribed lines - all can be accurately
located with this tool
• Body and contacts are made of tool steel, hardened,
ground and lapped to close tolerances for diameter
and concentricity
• Furnished in attractive, protective case
199 MASTER PRECISION LEVEL
• Ground and graduated main vial of
10-second accuracy; one division equals
1/2 thousandth (0.0005) of an inch per
foot, or 0.04mm per meter
• Groove has a special involute design
• Grooveandbearingflatsaremachinedtogether
• Main vials have seven graduations on
each side of the bubble
• Special alloy iron used to obtain freedom
from thermal effects
Cat. No. EDP Description Body Diameter Contact Diameter Sale Price
827A 53062 Single end .375" .200" 23.75
Cat. No. EDP Description Sale Price
S828HZ 53064
Wiggler/centerfinderwithcaseand4attachments-
828B,C,D,PT09186
56.05
Cat. No. EDP
Size
Sale Pricein mm
199Z 50719 15 340 819.85
Cat. No. EDP
Size
Sale Pricein mm
98Z-12 50444 12 300 280.25
19starrett.com