Inspection Planning for various Projects, Review of documents, Tendering works, summary preparation on required intervals, documentation and more...

1. Page 1 of 3
YADAV MANOJKUMAR INDRAPALBHAI
Mailing address: 188,Laxminarayan Soc.
A.K. Road,
Surat-395008
Cell No. : +91-8866368175 / 7016884055
Email id : manojyadav7878@gmail.com
 OBJECTIVE :
To be associated with an organization that will give me the chance to utilize my skills towards
the progress of an organization.
 WORK EXPERIENCE :
1. Company Name: TUV India Pvt Ltd (from July-2015 to at present)
Working as Project Coordinator cum Inspection Engineer
 in current company, Self is associated with arranging inspections for Mechanical & Electrical items
at various vendor places for various clients described as followed;
i.e. Pressure Vessel, Heat Exchanger, Air Cooler, Agitator, Skid mounted unit, Refractory, Pumps,
Pipe, Plate, Pipefittings, Fasteners, Forging, Flange, Gate valve, Globe valve , Check valve, Control
Valve, Structural steel beam, Structural steel plate, Tube, Butterfly valve, Generator, Transformer,
UPS system, LT Motor, HT Motor, Lighting Transformer, Switch Boards, control panel,
communication system, bus duct, battery charger, AC-DC Drive, Fire alarms, Flow meters, Water
treatment plant, concerting.
 Providing Service for Inspection of General, NACE & IBR Items.
 Manage contacts with clients, understand requests for activities worldwide. Working in close
partnership with the Executive Manager , I learned how to identify business opportunities and to
provide innovative and strategic initiatives. Lead the whole office with another project coordinator
& Inspectors working on daily basis. Taking care for documentation work.
 PROJECT WORKS in Current Company:
Working as Third Party Inspection Coordinator, Coordinated Various Projects successfully for
Industrial Services as follows:
1. Arranging Domestic as well as Overseas Inspections for various Projects.
2. Co-ordinated for TPI service of “VADINAR REFINARY” Project for M/s. ESSAR Oil Limited.
3. Co –ordinated Major Projects listed below for M/s. Larsen and Toubro Limited (L&T Power).
 2 x 660 MW, STAGE-II, UNIT 5 & 6, CHHABRA SUPER CRITICAL TPS
 Sikalbaha 225 MW CCPP
 BHERAMARA COMBINE CYCLE POWER PLANT (360 MW) DEVELOPMENT
 2 x 700 MWe PHWR - RAPP - Unit 7 and 8 (BOTI Package) [NPCIL approved
Inspection]

2. Page 2 of 3
4. Also Coordinating for Inspection Services for Various Clients. (M/s. GNFC, Deccan Fine
Chemicals, Hindalco-Unit of Birla Copper, SIEMENS, LINDE, RRVUNL, ANWESHA Engineering
& Projects, L&T Hydrocarbon Engineering, L&T Power, L&T Hravy Engineering, GEA, Essar
Heavy Engineering, PI Industries, ISGEC, RIL, ONGC, GCMMF etc.) For Various Projects in
various disciplines (Equipment, Piping, Fittings , Static, Packages, Rotary, Instrumentation)
 Following Major Projects are being executed for inspection currently for M/s. L&T Hydrocarbon ;
1) INDMAX-FCC Unit & LPG Treatment Facility at IOCL, Bongaigaon Refinary
2) Full conversion Hydrocracker Unit (FCHU)& Crude Distillation Unit-Vacuum Distillation
Unit (CDU-VDU) for HPCL, Vizag
3) Various Projects for M/s. L&T Hydrocarbon, Hazira for their client M/s. RIL, M/s. Technip &
M/s. ONGC.
 Monitoring inspection calls through Vision (TUV India software for Inspection calls & Reports
Monitoring), VCMS of M/s. L&T Power , ICMS of M/s. L&T Hydrocarbon & Quest.
 Associated with Business Development in current company & assisting for same. Also working
towards new approach of data analysis & documentation, which becomes useful to work towards
new orders/projects/clients, and also to evaluate company performance, which is useful to
identify & decide new strategies to be complied to enhance company performance.
 Acquainted with Tendering. (Online Tendering, Tender documentation, Documents Preparation
{Technical bid as well as Price bid} , Bid submission) , prepared and draft all the documents
requested.
 Support , manage and active cooperate in writing and overhauling contracts with clients and
vendors.
 Also serving for Quotation Preparation (for Indigenous as well as for overseas), Invoicing
Annexure Preparation, and Entry of Invoicing in SAP. Maintaining Registers for Inquiry, Various
Inspection Calls and Also managing Inspection calls & Inspection Reports as well as Inspection
Release Notes through various inspections monitoring system/software. Inspection Coordination,
Inspection calls Scheduling, Review of Reports, Documentation of Inspection Reports & Backup
Reports,
2. Company Name: Essar Steel India Ltd, Hazira
Worked as Inspection Supervisor in Refractory Section.
 Familiar with Ladle-Tundish Management/Operations, dimension checking of Refractory layer
in Tundish, assembly of Refractory parts, motorization of activities till tundish reaches for
pouring of Molten Metal in same.
3. Company Name: Vishal Engineering, Surat
Worked as Supervisor.
 Taking care of machining operations, manufacturing of textile machine Parts, CNC Operations,
Production & Quality checking, also familiar with Textile Machine Applications.
 ACHIEVEMENT :
NDT level-II certification - SNT-TC-1A by ASNT (American society for non-destructive testing)
level III Professions, from Trinity NDT Engineers, Bangalore.

3. Page 3 of 3
 EDUCATIONAL QUALIFICATION :
Examination Institution & Board Year of passing
SPI /
PERCENTAGES
NDT (Level-II)
TRINITY NDT
ENGINEERS,
BANGLORE
(ASNT)
Feb-2015
UT - 80.8
MT - 83.3
PT - 88.3
RT - 81.8
8th Sem
SHREE SWAMI
ATMANAND
SARASWATI
INSTITUTE OF
TECHNOLOGY,
GTU
BE (MECHANICAL)
May-2014 8.59
7th Sem Dec-2013 8.71
6th Sem May-2013 7.72
5th Sem Jan-2013 7.28
4th Sem May-2012 6.75
3rd Sem Dec-2011 6.94
2nd Sem June-2011 7.10
1st Sem Jan-2011 6.10
B. E. Aggregate – CPI (Cumulative Performance Index ) :- 7.41
CGPA(Cumulative Grade Point Average) :- 8.08
H.S.C.
P. P. SAVANI
VIDHYABHAVAN
2010 77.20%
S.S.C.
P. P. SAVANI
VIDHYABHAVAN
2008 86.15%
 COMPUTER SKILLS :
 MS-Office (Proficiency in Excell, Word, Outlook, Powerpoint)
 EXTRA CURRICULAR :
 Part-time worked as CNC Operator in Ishan Engineering, Surat.
 Participated in Robowar Event & Various cultural events organized at SSASIT, Surat.
 Project work in college on “Experimental Investigation on performance of Diesel Engine
working on Diesel & Neem oil Blends”
 ORGANISATIONAL SKILLS AND COMPETENCES
 Strong team spirit and ability to build and maintain Techno-commercial relationships with
people, to communicate, negotiate ,persuade and manage complains at all levels. I have also a
strong ability to work independently and to work under stress on multiple tasks. Years of
experience in Client Service jobs , dealing with high volumes of information made me a well-
organized person ,with a practical minded approach, who always see through resolutions.
Disciplined, Patient and persistent approach towards dealing with any situation.
 PERSONAL INFORMATION :
Date of birth : 28th October 1992
Languages known : Hindi, English, Gujarati