Atlas Honda is a Pakistani motorcycle manufacturer owned by Atlas Group and Honda Motor Company and based in Karachi, Sindh, Pakistan since 1962. It is the largest motorcycle assembler in Pakistan, as well as a market leader.
3. Ahmed ( CH-71)
3
First of all, we are very Thankful to Almighty Allah who
gives us Power and Strength to complete our Report and
represent it in such a great way. We also want to thank
our parents who supported us Physically, Mentally as
well as financially.
We are also very Thankful to Our Chairperson Dr. Rashid
Abro, who gives us a chance to present our Report. Sir
Ghulam Mujtaba Khan has been the ideal Report
supervisor. His advice, insightful criticisms, and
encouragement aided
the writing of this
Report. He is the
Person who himself
Organized Industrial
Visit to Atlas honda.
Without Sir G.M we
can’t manage this
Great Visit.
6. Ahmed ( CH-71)
6
Honda has been the world's largest
motorcycle manufacturer since 1959.
The Company was taken over by the
Atlas Group in 1980. From making loss in
1979, the Company has made steady
progress and had since been making
profit each year. Atlas Insurance Limited
has very sound reinsurance arrangements with the
reinsurers of the world including Swiss RE from
Switzerland, Hannover RE from Germany, Tokio Fire &
Nichido Marine and Sompo from Japan among others.
the world's largest manufacturer of internal combustion
engines measured by volume, producing more than 14
million internal combustion engines each year. Honda
became the second-largest Japanese automobile
manufacturer in 2001. Honda was the eighth largest
automobile manufacturer in the world.
A first class insurance Company that provide the highest
level of quality serive to its policyholders.
7. Ahmed ( CH-71)
7
To stay in the forefront of innovation and technological
development, continue to achieve corporate success,
provide its policyholders quality products and service to
their satisfaction, promote interest of all the stakeholders –
employees, shareholders, reinsurers and business associates
equitably fulfilling demand of overall social responsibility.
o Fairness-----Fairness to all employees, stakeholders,
business partners and client through adherence to
ethical value, applicable laws.
o Team Work----- They believe that long term
sustainability of performance is based on strong team
work only and all members are committed to work as a
team to get the best out of it.
o Value of time----- they believe that time is the scarcest
resource and performance excellence means managing
time to deliver the most in the shortest
period.
8. Ahmed ( CH-71)
8
We saw the following process in the
Atlas Honda Company.
We saw the cutting shop in the starting
area, the electric press cut the steel
sheets. 0.8mm of steel sheets used for
the making of body/frame and 0.2mm
sheets is for fuel tank. These steel sheets
are imported from Japan and other countries.
The cutted sheets were going to the welding area. Welding area
are divided in different division. Different energy sources was
used for welding, including a gas flame, an electric arc. Fuel
tank is made from
three steel sheets.
Workers manual weld
the sheets, only one
robot is installed for
welding purpose.
9. Ahmed ( CH-71)
9
Degreasing Shop
Parts cleaning is
essential in an
industrial processes,.
the fuel tank is put into
the concentrated acids
and also put into the
hot water. This process
makes the tank grease
free and ready to paint.
Before paint, the workers coated the Metaphor in the
tank. It serves as a conversion coating in which a dilute
solution of phosphoric acid and phosphate salts is
applied via spraying or
immersion and chemically
reacts with the surface of
the part. These coating
protect the paint from
water, sunlight and
radiations.
10. Ahmed ( CH-71)
10
Paint shop is the very costly, important and expensive
part of the company. Paint is any liquid, liquefiable, or
mastic composition that,
after application to a
substrate in a thin layer,
converts to a solid film.
The workers manually
paint the fuel tank,
chasses and other
components. It is most commonly used to protect, color,
or provide texture to objects.
The engine shop fitted the
engine’s components. The
components of the engine are
imported in the Japan and
the western side of the
Pakistan. The engine is also
tested in this shop.
11. Ahmed ( CH-71)
11
By mechanically moving the parts
to the assembly work and moving
the semi-finished assembly from
work station
to work station, a finished product
can be assembled. we saw, the
components of the vehicle fitted in
the chasses like wheels, fuel tanks.
After completing the vehicle,
the workers tested the speed,
breaks, lights, sounds, jumps
etc.
12. Ahmed ( CH-71)
12
Our suggestion
❖ We suggested that target of the company is to
reduce CO2 emission in their vehicles.
❖ We suggested that the Atlas Honda improve
efficiency of engine and achieving better fuel
efficiency.
❖ We wish that the Honda introduced Variable
Cylinder Management system in a reasonable price.