1. NATHAN CHAPMAN
25 Hallside Road
Cowpen
Blyth
NE24 5PE
07725027822
nathanchapman1990@hotmail.com
PROFILE
An enthusiastic, fast learning, time served qualified electrician with over 9 years
experience with installations of major and minor cabling, planned preventative and
reactive maintenance of electrical systems, appliances, machinery and high and low
pressure breathing air systems, fault finding to adapt and overcome any breakdowns or
to rectify any processes or problems arisen. Experience with customer service and
communication on both a technical and non-technical level, management of contracts
and overseeing electrical projects across additional sites across the UK and Ireland and
carrying out risk assessments and permit to works to internal and external contractors
all to a high level of health and safety.
I have a great passion for the renewable energy industry and I am always looking to
improve my technical knowledge. I am looking to get involved with the future
development of renewable energy and be part of the bigger picture to provide a better
and cleaner future for everyone, and improve the development and the improvement of
the environment that this industry allows. The wind industry is the key to test, expand
and improve all my technical and personal skills. the industry is the future of renewable
energy and I believe with my interests, experience and expertise I could be part of that
future development.
EXPERIENCE
May 2015-Current Maersk Training
· Gained 5 GWO’s for staying safe in the wind industry on and offshore. I have gained
experience with fitting working harnesses correctly, work position and fall arrest
lanyards, vertical fall arrest systems such as cabloc and inertia rail systems, techniques
and skills for climbing such as double hooking, emergency escapes using the Millan
system, emergency rescue training, working at height, working in a confined space at
both ground level and at height, use of gas detection equipment, emergency escape
breathing equipment, sea survival including boat transfers, fire awareness, major and
minor cabling, basic hydraulic systems within the turbine, VHF Communications
Training, Haulage Systems Training, bolt torque and tensioning training, first aid at
work, use of emergency defibrillators, rescues from a man down suspended at height
and in a confined space and manual handling.
August 2014-May
2015
· Began additional training to improve my own learning and to increase employment
opportunities for a more satisfying place of work. I gained knowledge, experience and
certification with manual handling and how to use the correct lifting aids accordingly,
Counterbalance, Bendi and Reach forklift truck licenses, ADR license to carry loads of
dangerous and hazardous natures safely within a vehicle.

2. Page 2
2006-August 2014 Draeger Safety, Electrician
 Started Draeger as an apprentice electrician gaining most of my hands on
technical knowledge as I carried out various roles. Early on I worked as a
maintenance electrician carrying out routine preventative maintenance on
various CNC machines and other machinery including auto fretage and carbon
and glass fiber winding machines. Adjusting, installing and maintaining high
and low pressure systems from 7.5 bar to 350bar pressures.
 Due to business progression I changed roles in 2007 and became an
installations electrician within the estates and facilities team. From this I
gaining a greater knowledge and experience with installations of single phase
and 3 phase electrical systems including power and lighting circuits. I worked
greatly with customers within the business to carry out all work request
efficiently and effectively to their timescales to a high level of health and
safety. Fault finding equipment and appliances to adapt and overcome power
failures or mechanical or electrical defects.
 Sole responsibility of the electrical maintenance and installations of 9 sites
across the UK and Ireland. It was my responsibility to manage contracts and
plan and oversee regular maintenance or additional works that was required
by customers.
 Planned preventative maintenance of electrical systems throughout the
business including portable appliance testing and emergency lighting testing.
 I gained certification and experience working with scaffold towers and most of
works carried out were at height either above or below ground levels, either in
a team or lone working.
 Gained IOSH managing safety as the business had a desire for me to be able to
write my own risk assessments but also to write risk assessments and permit
to works for external contractors.
 Gained additional on hands experience with small joinery works, small
plumbing works, and general site duties.
 During my employment I gained certification in the following internal industry
training: Asbestos awareness, Training with Absorbent and spill kit use,
Swagelok Installation, Legionella Awareness, BEST training (business excellence
system), Process Mapping, 5S, Drawings (machine shop) training, Critical
process training, Assembly Drawings training, and Kan ban training.

3. Page 3
EDUCATION
2015
2010
Maersk Training
Maersk level 2 Diploma “staying safe in the Wind Industry (Onshore and Offshore)”
GWO/Renewable UK Working At Height
GWO Manual Handling
GWO/QCF First Aid (including Use of Defibrillator)
GWO Sea Survival (Including Boat Transfer)
GWO Fire Awareness
CCNSG Safety Passport
Confined Space (Including use of EBS)
Electrical & Electronic Awareness
North East Chamber Of Commerce
NVQ in Installation and Commissioning (equipment Installation) Level 3
Advanced Apprenticeship in Engineering
2010 NIS Training
Requirements for Electrical Installations (BS7671 2008) (17th
Edition) Level 3
Inspection and testing of Electrical Equipment ( Portable Appliance Testing ) Level 3
2009-2010 Tyne Metropolitan College
Electro Technical-Technology Installation (Building and Structures) Level 2
Electro Technical – Technology- Installation (Building and Structures) Level 3 – Inspection,
Testing and Commissioning, Fault Diagnosis and Rectification, Application of Health and
Safety Principles
2008 North East Chamber of Commerce
Electro Technical – Technology Level 2
NVQ in Performing Engineering Operations Level 2
Key Skills in Information and Communications Technology Level 2
Key Skills in Improving Own Learning and Performance Level 2
Key Skills in Working with Others Level 2
2006-2008 Tyne Metropolitan College
BTEC National Award in Engineering Level 3
BTEC National Award in Electrical/Electronic Engineering Level 3
2003-2006 Blyth Community College
7 GCSE Grades C or above

4. Page 4
ADDITION INFORMATION
 Major and Minor Cabling Awareness with the Wind Turbine
 Bolt Torque and Tensioning Training with the Wind Turbine
 Basic Hydraulics Training
 VHF Communications Training
 Haulage Systems Training
 Full Clean Driver’s License
 PASMA Certified
 IOSH Managing Safety Certified
 Manual Handling
 ADR- Classes –2, 3 , 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8, 9
 Fork Lift Truck License’s for Counterbalance, Bendi and Reach application