1. RESUME
2015
GARY J.N. DEBACCO II
8002 WHITE AVE
HITCHCOCK, TEXAS
77563
HOME: (713) 481-1629
WORK: 409-941-6176
SOC. SEC. NO.: 433-31-6047
D.O.B.: FEBRUARY 6, 1962
EMAIL: DEBACCO@GOWEBWAY.COM
OBJECTIVE
To continue Enjoying A Successful And Rewarding Career As A Senior Instrument
& Electrical / SIS Control Systems Designer -- Engineer. (From bid stage to startup)
Currently Field Cost Analyst Engineer in Texas city.
SKILLS
Design consultant:
Sil calculations with Sil-solver and fault tree.
Safety Requirement Specifications.
Proof test Procedures Design and implementation.
Site acceptance procedures.
Design, manufacture, and install diamond SIS Safety Shutdown systems.
Lead instrument designer:
Initial bid package
Going to the field to talk to plant representative and define the project's scope of work.
Retrieving field information for package. (dwg's, measurements, routing's and mounting
. recommendations)
Retrieving quotes from construction companies and venders.
Specking instruments for project
Making price list.
Verifying voltage concerns and amperage ratings.
Design wiring and installation package:
Retrieving existing dwg's from customer.
Verifying existing dwg's against field devices.
Making as builds of existing field devices with out dwg's.
Verifying field measurements and routings of equipment and conduit.
Assigning work and back checking work of other designers and c.a.d. operators.

2. Following package to field for installation and startup
Receiving all job material.
Over seeing a five to fifteen man electrical/instrumentation crew.
Loop checks.
Startup.
Oversee as built pickups.
Checker:
Point to point wire checking of projects from other designers.
Designing Emergency Shutdown systems and controls:
For gas/steam turbines compressors/generators using Triconex PLC/controllers
Electrician.
Instrument tech.
Mechanical draftsman.
Computer aided draftsman. Autocad 14 and Microstation
Configuring and installing AutoCAD and various other computer programs.
Vax main frame experience.
Records clerk for drawing management system and equipment management system.
Supply and purchasing for design department.
Familiar with Proflow and third party software.
Instructor for technical board drafting and computer aided drafting including piping ,
civil, structural,
architectural, electrical, instrumentation, electronics, and mechanical drafting.
Equipment I'm familiar with
Burner Management Systems, Relay and PLC Based Systems, Design and
implementation.
Diamond SIS Safety Systems
Subsea deployment systems
Subsea hydro/electrical umbilical reels
Hydraulic power units
Remote operated deep water robotic vehicle systems
Gas and steam turbine, electronic automatic voltage regulation, boiler and furnace control
systems
and emergency shutdown systems. by Triconex corp.
Honeywell, Rosemount, Foxboro, Fisher & Porter, Moore: temperature, mass flow
,pressure,
Deferential pressure and level transmitters .
Bentley Nevada and IRD vibration systems.
Panalrm annunciator system
Triconex and Allen Bradley PLC systems.
Asco, Cashco, solenoids valves
G.E., Square D and Westinghouse, motor control centers.
Tri-sen MPS390, M305, M306, TS-310 PLC and TS-3000 PLC.
RECENT PROJECTS

3. BP Texas City TCACP Project.
SIS-TECH— ConocoPhillips Wood river, IL.
SIS-TECH— BP Texas City ,TX
SIS-TECH— Exxon / Jacobs Baton rouge, LA
SIS-TECH— Houston Refining Houston, TX
SIS-TECH— ConocoPhillips Lake Charles, LA
SIS-TECH— ConocoPhillips Ponca City, OK
SIS-TECH— Placid Refining Plaquemine, LA
SIS-TECH— Lyondell / S&B ENG Houston, TX
SIS-TECH— Age Refining / Polaris San Antonio, TX
SIS-TECH— Arkema Houston, TX
SIS-TECH— Valero Port Arthur, TX
SIS-TECH— Tesoro Martinez, CA
SIS-TECH— GE SAUDI OFF SHORE
SIS-TECH— JE Valero – Delaware
SIS-TECH— OXY HOBBS NEW MEXICO
SIS-TECH— GDS-EXXONMOBIL BAYTOWN TX
SIS-TECH— SCALLON CONTROLS ARKEMA
SIS-TECH— S&B -BP TEXAS CITY
SIS-TECH— WORLEYPARSONS EXXONMOBIL
SIS-TECH— Jacobs Valero Delaware
SIS-TECH— BP Decatur
SIS-TECH— Chevron Pascagoula
SIS-TECH— Technip Exxonmobil
SIS-TECH— INEOS BMC
SIS-TECH— Valero PA
SIS-TECH— premcor memhis refinery
Oceaneering—IWOCS group (installation and workover control systems) for subsea oil
wells.
(Houston IWOCS RENTAL GROUP)
Oceaneering-- research and development of new products. (Houston corp.eng)
Oceaneering-- updating manufacturing documentation for remote operated systems
Dow-- final wastewater sampling
Dow-- water softener
Dow-- install 1250 to 235 steam reducing station
Dow-- installation of intake pump
Dow-- Dowtherm 180 degree header
Dow-- replace fuel gas flowmeter
Dow-- install Micromotion on R222
Dow-- 70 titanium degasser
Dow-- installation of co2/eo analyzer on reactor 5000
Dow-- 200C peg expansion
Dow-- Modicon replacement
Dow-- E-70 replacement
Dow-- update plant P&ID's

4. Dow-- installation of new cooling system for GT-400 brush seals
Dow-- installation of computer controlled pump station
Dow-- installation of new conveyer bagging machine
Dow -- convert process instrumentation to PLC inputs
Tricoex--Southern Power Company--two G.E. frame 5 gas turbine's
and generator voltage control system's
Triconex--Exxon -- four steam turbines/compressors
Triconex--Chevron- two gas turbines/ compressors
Triconex--Various utility companies- three gas turbines/generators
HONORS AND ACHIEVEMENTS
Engineering excellence award Triconex Corporation
President and deans list Delta College
Perfect attendance awards Delta College.
Awarded letter of commendation for job well done United States Army.
EDUCATION
Triconex system implementation and maintenance course 1996.
Associate degree in graphic engineering and design.
Mechanical engineering and design course
Specialized courses in: electrical, electronics, instrumentation, structural and computer
aided
Engineering and design. Delta College Baton Rouge LA. 1988.
Electrical course United States Army 1979.
Received diploma from Walker High School 1979.
Walker High School Walker, LA.
Walker Jr. High Walker, LA.
Walker Elementary School Walker, LA.
EXPERIENCE
Field Cost Analyst Jacobs Eng.
Design consultant SIS-TECH:
Sil calculations with Sil-solver and fault tree.
Safety Requirement Specifications.
Proof test Procedures Design and implementation.
Site acceptance procedures.
Design, manufacture, and install of Diamond-SIS Safety Shutdown systems.
Design, manufacture, and install of Burner Management Systems
Electrical designer Oceaneering International Inc. Houston TX.. 2000-present
Senior checker / designer Oceaneering International Inc. Morgan City LA. 1999-2000
Senior Instrument designer Dow Chemical Plaquemine LA. 1997-1999
Senior Instrument/Electrical designer Triconex corp. Baton Rouge LA. 1995-1997
Instrument/electrical designer Premier Engineering Baton Rouge LA. 1993-1995
(part time) Civil designer Pyburn and Odem Baton Rouge LA. 1994-1995

5. (part time) Instructor for (I.T.I.) International Technical College Baton Rouge LA.
22+ hours a week 1992 - 1994.
Instrument, electrical, piping and mechanical computer aided designer.
Helped organized and keep design department supplied.
Records clerk in charge of dwg. File management system.
Records clerk in charge of equipment file management system.
Ethyl Corporation Baton Rouge LA. 1989-1993
Instrument/ electrical technician Process Services Inc. Baton Rouge LA. 1987-1989
Electrician for various construction companies
around The Baton Rouge Area. (See list of employees) 1982-1987
Electrician United States Army 1979-1982
McDonalds, Denham Springs LA. 1977-1979
LIST OF EMPLOYERS
Jacobs Engeneering, HOUSTON TX 2011-Present
Sis-Tech, Houston TX. 2005-2011
Oceaneering International Inc Houston TX. 2000-2005
Oceaneering International Inc. Morgan City LA. 1999- 2000
Dow Chemical Corporation contracted through Brooks Harbor 1997- 1999
Triconex Baton Rouge LA. ( premier engineering was bought by triconex) 1995-1997
Premier Engineering Baton Rouge LA. 1993-1995
part time Pyburn and Odem Baton Rouge LA. 1994-1995
part time International Technical College Baton Rouge LA. 1992-1994
Ethyl Corporation contracted through Process Services Inc. 1989-1993
Process Services Inc. 1987-1989
K.W. Electric Baton Rouge LA. 1986-1987
Contract Baton Rouge area 1985-1986
R.B. Electric Walker LA. 1984-1985
Contract Baton Rouge area 1984-1985
Osborn Construction CO. Baton Rouge LA. 1983-1984
Process Services Inc. Baton Rouge LA 1982-1983
Harmony Construction CO. Baton Rouge LA. 1982-1983
Agragate Denham Springs LA. 1982-1983
LIST OF JOB DUTIES Jacobs
Project Controls
Field Labor Analyst, Field Cost
Receive and record receipt of Document transmittals for each project.
Review the budget estimate and the revised budget while comparing it to the field design
package to note any variance.
Drawing Take Offs for the Civil, Structural, Piping, Instrumentation and Electrical
disciplines to compile a BOM to put in F.L.A. and record it in the Take Off database.
Requesting purchase orders and supplying a list materials needed for the projects.

6. Writing RFI's Request on items not in the original scope of work to request additional
Funding for the projects.
Routing and estimating the field routed conduit, cable and tray, providing the field with
marked up drawings.
Reviewing the design package with engineering and the field to line out questions about
the I/O and drawings packages.
Writing Value Plus RFI’s Request to the design package.
Assign cost codes to material requisitions.
Verifying field work being preformed compared to the drawing scope of work
And FLA inputs.
Supporting Jacobs and IES our sub contractor while keeping up with the changes that
engineering is making to the design scope.
LIST OF JOB DUTIES Sis-Tech.
Project manager as design consultant
Safety Requirement Specification design and implementation
Proof Test Procedures design and implementation
Factory acceptance test
Site Acceptance test
Diamond-SIS Safety Shutdown System Design, manufacture And installation
Design, checker
Developing job scope with technicians
Research and discovery
Project design
Verifying field installation
Final package design
SIS-TECH Customer Resume:
Nick DeBacco – Design Consultant
SUMMARY:
With over 25 years in the process industry, Nick has applied his I&E experience over a
wide range of disciplines, specializing in shutdown and safety instrumented systems. He
has experience with boiler and furnace control and shutdown systems. Well head

7. intervention. Gas/steam turbines compressors/generators control and safety and shutdown
systems.
SPECIFIC EXPERIENCE:
Detailed design, factory & site acceptance test procedures & supervision, operator
training, maintenance training, construction management, start-up and shutdown
procedures. Over seeing installation and implementation of newly installed systems.
EDUCATION/TRAINING:
Triconex system implementation and maintenance course.
Associate degree in graphic engineering and design.
Mechanical engineering and design course
Specialized courses in: electrical, electronics, instrumentation, structural and computer
aided
Engineering and design. Delta College Baton Rouge LA.
Electrical course United States Army.
SKILLS:
Lead instrument designer: Initial bid package, Going to the field to talk to plant
representative and defining
the project's scope of work. Retrieving field information for package. (dwg's,
measurements, routing's
and mounting recommendations) Retrieving quotes from construction companies and
venders,
Specifying instruments for project. Making price list. Verifying voltage concerns and
amperage ratings.
Design wiring and installation package: Retrieving existing dwg's from customer.
Verifying existing dwg's
against field devices. Making as builds of existing field devices with out dwg's. Verifying
field
measurements and routings of equipment and conduit. Assigning work and back checking
work of other
designers and c.a.d. operators. Following package to field for installation and startup.
Receiving all job
material. Over seeing a five to fifteen man electrical/instrumentation crew. Loop checks.
Startup.
Oversee as built pickups.
Checker: Point to point wire checking of projects from other designers.
Designing Emergency Shutdown systems and controls:

8. For gas/steam turbines compressors/generators using Triconex PLC/controllers