Take a look at out the latest Mr Cropper Brochure offering the largest rang of pile croppers in the UK specialising in contiguous and secant wall solutions and all applications. Providing customers with on site assistance and nationwide service by full trained service engineers.

1. THE LARGEST RANGE OF PILE CROPPERS IN THE WORLD
A Vp plc Company

2. Mr Cropper offer the largest range of Pile Croppers in
the world to suit all applications. Our dedicated team
of highly experienced professionals can provide on-site
assistance anywhere in the UK and will do all they can
to meet your expectations.
Offering nationwide delivery service by fully trained
service engineers, Mr Cropper will ensure your
equipment is ready when you are.
However big the job, however difficult the situation,
Mr Cropper have the answer.
Tel: 0870 6077744
Email: info@mrcropper.co.uk
Website: www.mrcropper.co.uk
Introduction
02 NATIONWIDE SPECIALISTS IN PILE CROPPER HIRE

3. PRECAST SINGLE BAR PILES
Pile Cropper 04
PRECAST MULTI-BAR PILES
Power Cropper 05
Multi-Bar Cropper 06
CIRCULAR PILES
CFA Cropper 07
CHD Cropper 08
Trench Cutter 09
4 Jaw Cropper 10
Mega 4 Jaw Cropper 11
Contents
Unlike other companies, Mr Cropper design and build
all of their own croppers. If in any doubt, the dedicated
team of experts can give you all the information and
assistance you need.
030870 6077744 • www.mrcropper.co.uk

4. 04 NATIONWIDE SPECIALISTS IN PILE CROPPER HIRE
Single Bar Pile Cropper
For cutting square pre-cast single reinforcement piles, The Pile Cropper
is light and easy to use.
The Pile Cropper is the chosen equipment when
cutting square, pre-cast, single reinforcement
bar piles. It is lowered onto the pile and using the
excavators in-board hydraulics to operate the
jaw, it cuts the pile every 200mm, causing the
concrete to break away, exposing the rebar and
a level finish. All that is left is to cut the rebar to
the required height.
THE PILE CROPPER
Pile Size (mm) 200/300 300/350
Machine Carrier Class (tonne) 6/15 6/15
Oil Flow L/Min 15/20 15/20
Operating Oil Pressure Max (bar) 210 210
Height (mm) 900 900
Width (mm) 550 600
Length (mm) 900 900
Weight (kg) 450 600
CHAINSINCL.

5. The Power Cropper
The Power Cropper is used for ultra fast pile reduction and has two functions
for cutting pre-cast, four bar piles.
The Power Cropper is a very powerful machine
specially designed to be used in any application
including trenches and other confined spaces.
It is used by being suspended from the dipper arm
of an excavator to achieve one of the following:
Function 1: The Power Cropper can break off the
pile and rebar in one go to enable you to rapidly
reduce the pile to a desired level, then dump the
waste straight into a dumper or allocated site area.
Function 2: The Power Cropper is then used to
‘nibble’ the pile, causing the concrete to fracture
and leaving the rebar exposed.
THE POWER CROPPER
Pile Size (mm) 200/300 350
Machine Carrier Class (tonne) 13/25 13/25
Oil Flow L/Min 40/80 40/80
Operating Oil Pressure Max (bar) 210 210
Height (mm) 1200 1200
Width (mm) 650 700
Length (mm) 1300 1400
Weight (kg) 1100 1200
050870 6077744 • www.mrcropper.co.uk
CHAINSINCL.

6. The Multi-Bar Cropper
Used to cut down square pre-cast piles with four to eight rebar.
The Multi-Bar Cropper is the chosen piece of
equipment when cutting square pre-cast piles
with up to eight rebar.
It is suspended from the dipper arm of a 360°
excavator and is powered by the excavators
in-board hydraulics. The cropper is lowered over
the pile in 300m increments until finished level is
achieved.
THE MULTI-BAR CROPPER
Pile Size (mm) 200/300 300/350
Machine Carrier Class (tonne) 6/13 6/13
Oil Flow L/Min 40/80 40/80
Operating Oil Pressure Max (bar) 210 210
Height (mm) 400 400
Width (mm) 1300 1400
Length (mm) 1300 1400
Weight (kg) 450 500
CHAINSINCL.
06 NATIONWIDE SPECIALISTS IN PILE CROPPER HIRE

7. CHAINSINCL.
The CFA Cropper
The fast, safe method of reducing cast in-situ, circular, concrete piles.
The CFA Cropper will cut circular concrete piles from 300mm diameter and upwards of
1200mm. It’s modular design allows it to be adjusted to suit different pile sizes on site.
Using the CFA pile cropper, an average 300mm circular pile can be reduced to your
required level in as little as 3 minutes, compared to an average 45 minutes when manually
cut using hammers and breakers.
THE CFA CROPPER
Pile Size (mm) 300 450 550 650 750 850 950 1050 1150
Machine Carrier Class 6/20 10/20 13/20 13/20 13/20 13/20 13/20 13/20 13/20
Oil Flow L/Min (tonne) 40/80 40/80 40/80 40/80 40/80 40/80 40/80 40/80 40/80
Operating Oil Pressure Max (bar) 210 210 210 210 210 210 210 210 210
Height (mm) 400 400
600mm clearance required from edge of pile on all C.F.A PilesWidth (mm) 1300 1400
Length (mm) 1300 1400
Weight (kg) 680 882 992 1102 1257 1367 1635 1745 1870
070870 6077744 • www.mrcropper.co.uk

8. The CHD Cropper
This cropper is designed to cut CHD or ‘corkscrew’ piles.
The CHD Cropper has been especially designed
to suit CHD or ‘corkscrew’ piles but can in some
cases be used for contiguous or seacant piles.
This unique cropper has the power and strength
to remove the outside fins of the pile whilst
leaving the rebar unhurt.
This cropper is very powerful and has the weight
to match, therefore we recommend a minimum
16 tonne excavator to carry and power this
machine safely.
THE CHD CROPPER
Pile Size (mm) 300/600
Machine Carrier Class (tonne) 16/20
Oil Flow L/Min 40/120
Operating Oil Pressure Max (bar) 210
Height (mm) 820
Width (mm) 1945
Length (mm) 1650
Weight (kg) 1700
CHAINSINCL.
08 NATIONWIDE SPECIALISTS IN PILE CROPPER HIRE

9. The Trench Cutter
090870 6077744 • www.mrcropper.co.uk
This cropper has been successfully used in the housing industry when house
footings have to be kept to a minimum, making considerable savings on concrete.
The Trench Cutter is used for cutting 300 – 400mm
piles in a trench of only 700mm wide.
This machine is unique to Mr Cropper and has
become a favourite with Housing Groundworks
Contractors who fully appreciate the saving on
concrete that can be achieved compared to other
Croppers on the market.
THE TRENCH CROPPER
Pile Size (mm)
STANDARD LARGE
300 400
Machine Carrier Class (tonne) 8/13 8/13
Oil Flow L/Min 40/80 40/80
Operating Oil Pressure Max (bar) 210 210
Height (mm) 820 820
Width (mm) 600 700
Length (mm) 1440 1550
Weight (kg) 750 800
CHAINSINCL.

10. Used for cutting cast in-situ piles ranging from 300mm to 750mm leaving the
rebar intact.
The 4 Jaw Cropper has been designed for all
four blades to move together, which means
no alterations have to be made on site to the
cropper when cutting different sizes of pile.
The 4 Jaw Cropper is suspended from the
dipper arm and is powered by the excavators
in-board hydraulics.
THE 4 JAW CROPPER
Pile Size (mm)
STANDARD LARGE
300/600 600/750
Machine Carrier Class (tonne) 13/20 16/20
Oil Flow L/Min 40/120 40/120
Operating Oil Pressure Max (bar) 210 210
Height (mm) 1250 1300
Width (mm) 1658 1910
Length (mm) 1658 1910
Weight (kg) 1400 1600
The 4 Jaw Cropper
CHAINSINCL.
10 NATIONWIDE SPECIALISTS IN PILE CROPPER HIRE

11. The Mega 4 Jaw Cropper
THE 4 JAW CROPPER
Pile Size (mm) 750/900
Machine Carrier Class (tonne) 20/30
Oil Flow L/Min 75/120
Operating Oil Pressure Max (bar) 210/250
Height (mm) 1500
Width (mm) 2200
Length (mm) 2200
Weight (kg) 2300
110870 6077744 • www.mrcropper.co.uk
Used for cutting cast in-situ piles ranging from 750mm to 900mm leaving the
rebar intact.
The Mega 4 Jaw Cropper is one of the largest
croppers in the fleet, cutting piles up to 900mm.
The four blades move in unison to crop and
hold the pile, allowing the operator to dump the
waste in one fluid movement.
The minimum excavator required to handle this
cropper is 20t due to the size and weight of the
machine. Chains are included in the hire cost.
To see this cropper in action
visit the YouTube channel
www.youtube.com/pilecroppers

12. T: 0870 6077744
F: 0870 6077755
W: www.mrcropper.co.uk
E: info@mrcropper.co.uk
NationwideService
A Vp plc Company