26+ YEARS OF ENGINEERING AND DESIGN, EPCC PROJECTS , PROJECT MANAGEMENT EXPERIENCE IN THE FIELD OF INSTRUMENTATION, CONTROL AND AUTOMATION

1. 26+ YEARS OF ENGINEERING AND DESIGN, EPCC PROJECTS, CONSTRUCTION, COMMISSIONING
AND PROJECT MANAGEMENT EXPERIENCE IN THE FIELD OF INSTRUMENTATION, CONTROL AND
AUTOMATION IN OIL AND GAS INDUSTRY
PRECIS
Dedicated and personable Instrumentation, Control & Automation Engineer with 26+ years of rich experience in
Instrumentation and Control Systems involving Feasibility Studies, Conceptual Design, Front End Engineering Design
(FEED) , Detail Engineering, EPCC projects, Technical support for start ups, commissioning and facility maintenance
for Oil & Gas Offshore and Onshore Greenfield & Brownfield (Revamp/Upgrade) facilities.
PROFESSIONAL SYNOPSIS
 Project Management, Planning, Scheduling and Cost control for green / brown
field and revamp upgrade projects
 Familiar with Instrumentation and Controls for Integrated Platforms, Central
Processing Platforms, Wellhead Platforms, Satellite Platforms, Floating
Production Storage Offloading (FPSO), Sub-Sea Pipelines, Sub-sea Systems, LNG
and onshore storage, distribution, remote terminal and metering facilities
 Engineering & Design experience of DCS (Conventional & Field bus), Fire & Gas,
Safety Shutdown Systems, Remote Telemetry Units, Wellhead Control Panel,
Gas Metering Systems, SMART Wells Instruments, Liquid Metering Systems,
Multiphase Flow Meter, High Integrity Pressure Protection Systems (HIPPS),
Pipelines Instrumentation, Tank Forms Instrumentation, HVAC, CCTV,
Generator Package, Compressors Package, Intrusion Detection System, Access
Control System and other field instruments like Transmitters, Control Valves,
Shut Down Valves and Choke Valves
 Engineering and Design experience of Sub-sea Control Systems including
Hydraulic Power Units (HPU), Accumulator Skids, Master Control System (MCS),
Sub-sea Power & Communication Unit (SPCU), Topside Umbilical Termination
Unit (TUTA), Sub-sea Umbilical Termination Unit (SUTU), Sub-sea Control
Modules (SCM) and Sub-sea Distribution Unit (SDU)
 Procurement, Construction, Commissioning Support and Management Of
Change (MOC) during project execution
 Expert in handling projects in Instrumentation, Automation & Control: Front
End Engineering Design (FEED), Project Management Consultancy (PMC),
Engineering, Procurement, Construction and Commissioning (EPCC), Main
Automation Contractor (MAC) and Vendor Contracts
 Ability to provide technical support to the facility maintenance. Preparing,
monitoring and execution of Vendor service contracts.
 Strong experience across all areas of instrumentation and control engineering
with extensive familiarity with field specifications & instruments
 Engineering and design for sour (H2S) service facilities with pressure starting
from 150 # up to 10000 #.
 Ability to work as part of a multi-discipline team for facilities engineering
projects and/or offshore development projects; draft & review cost estimates,
input to budget submissions.
CORE COMPETENCIES
• Instrumentation, Control and Automation Systems
• Project Management
• Contractor Management (EPC / MAC/Vendors)
• Conceptual / Detailed Design
• Front End Engineering Design (FEED)
• Feasibility Studies & Costs Estimation
• Green / Brown Field Projects
• Turnkey EPC Projects
• International Codes & Standards, Recommended Practices in
Instrumentation & Control Engineering
• Recognize areas of obstruction/breakdowns and take steps to
rectify equipment by applying troubleshooting tools
• Plan & execute cost and energy saving techniques, measures and
modifications to attain substantial reduction in expenditures
• Organize and prioritize work to meet deadlines and relate to
people at any level of business and management
World Proven Practices and Local
Regulations
Pre-commissioning, Commissioning,
Site Acceptance Test, Handover,
Documentation
Spares Management, Maintenance
Contacts Management, Training,
Technical Support to Facility
Maintenance and Enhancement
Standards & Specifications
International Standards &
Recommended Practices (BS, IEC, ISO,
API, ASME, NFPA, ISA)
Company Engineering Specifications,
Codes and Practices (Shell -DEP,
PETRONAS-PTS, ExxonMobil-GS/GP,
ADMA-OPCO-SEDS , ZADCO Engineering
Standards, BP Engineering Practices
Project Specifications, Philosophies,
Study Reports, Technical notes,
Technical Bid Evaluations
Material Procurement, Fabrication,
Field Engineering, Site Construction
NITIN SHANWARE
: +971 55 189 2696|: nshanware@yahoo.com / nshanware@gmail.com
Single Point Expertise in Instrument &
Control Activities in Oil & Gas Industry

2. • Tendering & Bidding
• Pre-commissioning, commissioning & operating test
procedures and handover documentation
• Vendor / Stakeholder Management
• Risk Assessment / Management
• Quality Control / Assurance
• Resource Management
• Strategic Planning & Execution
• Indentify and fulfill training needs to enhance skills
• Effective communicator with exceptional analytical, technical,
negotiation and relationship management skills
• Adept technical support to facility maintenance and an asset
management using MAXIMO software.
• Adept technical support to facility maintenance and an asset
management using MAXIMO software.
• Participate in planning and implement scheduled
maintenance and tests, systems modifications and requirements
for spares and equipment to ensure the continued functioning of
the system hardware.
• Proficient with Office Automation (Word, Excel, PowerPoint),
Design Software / Information Technology, InstruCalc Plus 5.1
design software for sizing of Instruments like Control Valves,
Orifice plates, Relief valves, Annubar, Flow meter & Rupture disc,
Foundation Fieldbus Segments sizing using segment calculator,
Smart Plant Instrumentation (INTOOLS) software
CREDENTIALS
ACADEMIA
 Bachelor of Engineering (B. E) specializing in Electronics Engineering,
Nagpur University, India, 1988
TRAININGS/WORKSHOPS
 DCS, Fuji Electric Company, Japan
 Programmable Logic Controllers, Siemens, India
 Transmitters, Fuji Electric Company, Japan
 Process Analysers, Servomex PLC, UK
 Dust Monitoring Analysers, PCME, UK
 Safety training in Saudi Arabia by SADAF, SAMREF, SAFCO, Saudi Aramco
 Safety training by Malaysia Marine Heavy Engineering, Ranhill Worley, PETRONAS Gas, PETRONAS Melaka Refinery, PETRONAS
Carigali, ADMA-OPCO, ZADCO, Shell, Exxon Mobil
 Helicopter Underwater Escape Training, Fire fighting Training, Offshore Safety Training
 ISO 9000 QMS, Thermax Fuji Electric Company Ltd., India
 ISO 9000 QMS, Malaysia Marine Heavy Engineering & Worley Parsons
PROFESSIONAL MEMBERSHIPS / AFFILIATIONS
 Chartered Engineer of the Institution of Engineers (India), C. Egg
 Corporate Member of the Institution of Engineers (India), MIE
 Professional Engineer – Board of Engineers, Malaysia, PE
CAREER HIGHLIGHTS
 Successfully
o Accomplished all project goals, objectives and commercial production of first oil
o Played a key role in meeting / exceeding all financial, performance, quality and company satisfaction parameters
o Recognized for providing most optimum solutions to issues by improving designs
o Completed optimum design of I&C and standardisation of design and engineering resulting in substantial cost
savings
o Achieved quality work with no Non-Conformance Report (NCR) ensuring compliance with codes & standards
o Accomplished Phase-1 of Umm Lulu Field Development project – ZADCO
ORGANIZATIONAL SCAN

3. ZADCO
Duties
 Head and In charge for Instrument, Control and Automation for Umm Lulu Project, Phase-1
 Attend and participate in project reviews and workshops lie Design Review, HAZOP, HAZID, SIL, Vendor Data Review, FAT, SAT and
Approvals
 Propose / review design solutions, prepare / review data sheets, perform / review bid evaluations and advise on instrumentation
systems portion of work for new field development
 Provide site support and technical assistance for the entire project life cycle of detailed design, construction, hook-up and
commissioning of the new facilities, both in the offshore and onshore work environments
 Observe relevant factory acceptance tests and/or site acceptance tests; review and co-ordinate works both offshore & onshore
and provide instruction / guidance on technical issues in line with project requirements
 Review existing instrumentation systems for adequacy of design; perform detailed design of instrumentation modifications as
required
 Interface with and provide technical guidance for activities of consultant engineering contractors as required
 Provide technical reports and assist in preparing management reports and attending project meetings
 Work to ensure that the Company’s Management of Change and other risk management policies are maintained and that all work
is carried out in accordance with departmental procedures
 Participate in interface meetings with onshore & offshore construction; participate in design reviews, technical impact and review
meetings with construction, development, production and other groups
 Maintain a complete record of technical items and correspondence to support design decisions and equipment selection,
documenting all key instrument systems engineering calculations
 Raise and discuss key & critical technical issues with the Engineering Manager to develop cost effective solutions, using best
operating practices and current industry design criteria
 Plan and execute Instrumentation engineering design for field instrumentation, DCS, Supervisory control and Data Acquisition
(SCADA), Integrated Control System (ICS), Fire & Gas, Safety Instrumented Systems (SIS) and Telecommunications systems
 Prepare basic designs, FEED and detailed designs of the instrumentation & controls part of the project including Control &
Operations Philosophy, Schedule & Cost Estimates, EPIC SoW, Schedule & Cost Estimates, Basis of Design document, Architecture
Diagrams, Functional Specifications, Telecommunication System, Technical Bid Evaluations, Review of instrumentation drawings,
Construction SoW, Review of drawings from other disciplines, etc.
 Provide Technical support to facility maintenance, improvements, Prepare, monitor and implementation Vendor service contracts
WORLEY PARSONS
Duties
 Lead and In-charge for Instrument, Control and Automation for projects awarded to the Company.
 Involved in FEED, conceptual design, detailed design and EPC scope assisted by a team of Engineers and Designers
 Reviewed/Developed I&C Design Philosophy, Specifications, SoW, Datasheets, Sizing Calculations and other key deliverables
ensuring all project milestones are achieved
 Actively took part in project reviews and workshops like Design review, HAZOP, HAZID, SIL
 Involved in vendor data review, FAT, Approvals along with preparing estimates for costs, manpower, time & resources (CTR)
 Develop/review pre-commissioning, commissioning and operating test procedures and handover documentation
 Close co-ordination and effective communication with customers, Contractors, Vendor and other team members
Projects Accomplished
1) FEED/Detailed Design for Fuel Gas System Instrument and Control upgrade at ADMA-OPCO, UAE
2) FEED/Detailed Design for Sub-station Instrument and Control upgrade at ADGAS, Das Island, UAE
3) FEED for Oil & Gas Mishrif Drilling Waste Management Complex at LUKOIL, onshore Middle East
4) Detailed Design Refurbishment of Rumalia Field Instrumentation and Control B P, onshore Iraq
5) Conceptual Design and Detail Design TAPIS EOR project at Exxon Mobil, Malaysia
6) Conceptual Design for Samarang Re-development project at PETRONAS Carigali, Malaysia
7) Conceptual Design for Malikai Deepwater project at Shell, Malaysia
8) FEED for Kumang Cluster Offshore development project at PETRONAS Carigali, Malaysia
9) FEED/Detailed Design for Son Doc Offshore at Truong Son Joint Operating Company, Vietnam
Company Name Duration Designation
ZAKUM DEVELOPMENT CO (ZADCO), ADNOC
GROUP, Abu Dhabi, UAE
Dec’11 – Present
Project In-charge
( Instrumentation, Control and Automation)
WORLEY PARSONS, UAE & Malaysia Dec’03 – Dec’11
Principal Engineer
( Project In-charge Instrumentation, Control and
Automation)
MALAYSIA MARINE HEAVY ENGINEERING (A
Petronas Group of Company), Malaysia
Nov’01 – Nov’03 Instrument Engineer
MANNAI ENGINEERING COMPANY, Saudi Arabia Jan’98 – Aug’01 Instrument Engineer
THERMAX FUJI ELECTRIC COMPANY (THERMAX
GROUP), India
Sep’88 – Dec’97
Deputy Manager
(Instrumentation, Control and Automation)

4. 10) Conceptual Design for Sumandak Offshore project at PETRONAS Carigali, Malaysia
11) FEED/Detailed Design for F13 E Offshore project at Shell, Malaysia
12) Detailed Design for Suriya, Bumi, Bulan Offshore project at CITOC, Malaysia
13) FEED/Detailed Design for Tapis F Offshore project at Exxon Mobil, Malaysia
14) Detailed Design for Baram Offshore Brownfield project at PETRONAS Carigali, Malaysia
15) FEED/Detailed Design for Samarang Offshore Brownfield project at PETRONAS Carigali, Malaysia
16) Detailed Design for LEDANG/ANOA offshore project at PETRONAS Carigali, Malaysia
17) FEED for LNG, Malaysia
18) FEED/Detailed design for various upgrades/revamps of facilities at Shell, Sarawak, Bintulu Onshore Control Centre.
19) FEED/Detailed design for various upgrades/revamps of facilities at PETRONAS, Terengannu , Sarawak Onshore facilities.
20) Technical expert services for facility maintenance, improvement and support for facilities
MALAYSIA MARINE HEAVY ENGINEERING
Duties
 Developed SoW, data sheets, sizing calculations and other key deliverables
 Provided assistance during procurement, vendor evaluation, fabrication, installation and commissioning activities
 Involved in vendor data review, FAT, Approvals and assisting in procurement, vendor evaluation, fabrication, installation and
commissioning
 Develop/review pre-commissioning, commissioning and operating test procedures and handover documentation
Projects Accomplished
1) EPC for Champion West Offshore project at Shell, Brunei
2) EPC for North Lukut & Penara FPSO at PETRONAS Carigali, Malaysia
3) EPC for ERHA / Saipem FPSO modules at Exxon Mobil, Nigeria
4) EPC for Helang Offshore platforms at Nippon Oil, Malaysia
MANNAI ENGINEERING COMPANY
Duties
 Developed SoW, data sheets, sizing calculations and other key deliverables
 Provided assistance during procurement, vendor evaluation, fabrication, installation and commissioning activities
 Develop/review pre-commissioning, commissioning and operating test procedures and handover documentation
Projects Accomplished
1) EPC for various Instrument & Control works at Saudi Petrochemical Company (SADAF), Saudi Arabia
2) EPC for various Instrument & Control works at Saudi Aramco Mobile Refinery (SAMREF), Saudi Arabia
3) EPC for various Instrument & Control works at SAFCO, Saudi Arabia
4) EPC for various Instrument & Control works at Petrokemya, Saudi Arabia
5) Technical expert services for facility maintenance, improvement and support for facilities
THERMAX FUJI ELECTRIC COMPANY
Duties
 Head and In charge for Instrument, Control and Automation for projects awarded to the Company
 End-to-end project management involving complete detail engineering stage through construction, commissioning and hand-over
for I&C activities assisted by a team of Engineers and EPC Contractor
 Involved in vendor data review, FAT, SAT, approvals, estimates for costs, manpower, time & resources (CTR) for projects
 Efficiently managed manpower, material and overall project cost controls ensuring all project objectives are achieved within
agreed timelines and approved budgets
 Worked in close collaboration with customers, EPC Contractor and other team members for successful closure of projects
 Ensure strict adherence to the company’s Engineering Standards as well as Health, Safety & Environment during project execution
 Identified training requirements and organized the same for resources to enhance skills matrix
 Actively took part in project reviews and workshops like Design Review, HAZOP, HAZID, SIL etc.
 Develop/review pre-commissioning, commissioning and operating test procedures and handover documentation
Projects Accomplished
1) Detailed Design, EPC for various Instrument & Control works at Indian Petrochemicals Corporation Ltd.
2) Detailed Design, EPC for various Instrument & Control works at Hindustan Organic Chemicals Ltd.
3) Detailed Design, EPC for various Instrument & Control works at Indian Petrochemicals Corporation Ltd.
4) Detailed Design, EPC for various Instrument & Control works at Thermax Ltd.
5) Technical expert services for facility maintenance, improvement and support for facilities
IT SKILLS & PROFICIENCY
Functional / Engineering
Design Softwares
InstruCalc Plus 5.1 design software for sizing of Instruments like Control Valves, Orifice plates, Relief valves,
Annubar, Flow meter & Rupture disc
Foundation Fieldbus Segments Sizing using segment calculator
Smart Plant Instrumentation (INTOOLS), Maximo Asset Management software
Operating Systems Windows

5. Application Packages MS Office Suite
Internet Applications & Tools
PERSONAL PROFILE
Date of Birth : 19th
July, 1967
Marital Status : Married
Linguistic Abilities : English, Hindi & Marathi
Passport Details : Indian Passport Z2109658
Driving License : Valid UAE, Malaysian & Indian driving licenses
References will be pleased to furnish on request

6. Application Packages MS Office Suite
Internet Applications & Tools
PERSONAL PROFILE
Date of Birth : 19th
July, 1967
Marital Status : Married
Linguistic Abilities : English, Hindi & Marathi
Passport Details : Indian Passport Z2109658
Driving License : Valid UAE, Malaysian & Indian driving licenses
References will be pleased to furnish on request