This document provides an overview of basic electrical tools, equipment, and their uses. It lists and describes common tools like pliers for gripping wires, screwdrivers for fasteners, drills for making holes, saws for cutting, soldering materials for joining metals, hammers, measuring tools, and miscellaneous tools like pipe cutters and test lights. The document serves as a lesson on fundamental electrical tools needed for working with wiring, conduit, and building structures.

1. GOOD AFTERNOON! Good afternoon! To Mrs. Pizzaro and to all of my classmates!!!  To Mrs. Pizzaro and to all of my classmates!!! 

2. LESSON 8:

3. Basic electrical tools, equipments and their uses

4. 1. PLIERS -used for cutting, holding and gripping of wires

5. SIDE CUTTING

6. CHAIN NOSE

7. SLIP JOINT

8. LINEMAN’s PLIERS

9. LONG NOSE

10. OBLIQUE CUTTING

11. SCREW DRIVER - used for loosening and tightening of srews

12. CONVENTIONAL STRAIGHT SHANK

13. PHILLIPS

14. DRILLING EQUIPMENT - needed to make holes in building structures passage of conduit and wires

15. POWER DRILL

16. RATCHET BRACE

17. SAWING AND CUTTING TOOLS

18. CROSSCUT SAW

19. KEYHOLE SAW

20. HACKSAW

21. SOLDERING MATERIALS

22. SOLDERING PASTE

23. SOLDER ( LEAD )

24. SOLDERING GUN

25. ELECTRIC SOLDERING IRON

26. SOLDERING COPPER

27. PROPANE TORCH

28. HAMMERS

29. LINEMAN’s HAMMER CLAW HAMMER BALL PEEN HAMMER

30. MEASURING TOOLS

31. ZIGZAG RULE PUSH-PULL RULE STEEL TAPE

32. MISCELLANEOUS TOOLS

33. PIPE CUTTER TEST LIGHT PIPE REAMER

34. WOOD CHISEL CONDUIT BENDER

35. THANK YOU ! END OF THE REPORT… GOD BLESS YOU ALL  Pearl Marie G. Honorio II-1