Electrical Engineer with around 6.8 years’ experience in Site Management and QA/QC activities in the field of Cathodic Protection of Oil and Gas Pipeline in On- shore, Off- shore & Well head .

1. CURRICULAM VITAE
M.RAMASAMY
Mobile: +673 8974538(Brunei)
+91 9535129248 (India).
E-mail: ramasamy87@gmail.com
To be successful professional by teamwork and achieve the goals of the company I am in.
ACADEMIC CREDENTIALS
 B.E.–Electrical & Electronics Engineering with First Class
114: S A Engineering College, Affiliated in Anna University.
Chennai-600077, Tamilnadu, INDIA
 DIPLOMA. – Electrical & Electronics Engineering with First Class with Honours
Govt.Polytechnic College, Department of Technical Education,
Coimbatore–641014, Tamilnadu, INDIA
Additional Qualification:
 NACE CP LEVEL -2(CATHODIC PROTECTION TECHNICIAN)
 MEMBERSHIP NO-449627
OFFSHORE Qualification:
 TBOSIET (OPITO APPROVED)
 IMS 5- Successfully completed
CAREER CONSPECTUS
 Electrical Engineer with around 6.8 years’ experience in Site Management and
QA/QC activities in the field of Cathodic Protection of Oil and Gas Pipeline in On-
shore, Off- shore & Well head .
CAREER HIGHLIGHTS
AUGUST-15–Till now MOZZAT ENTERPRISE SDN BHD.
Position: Cathodic Protection Engineer
CATHODIC PROTECTION MAINTANANCE WORK-
BRUNEI SHELL PETROLEUM –BRUNEI
 Pre-job meeting and permits preparation and application
 Review related documents on existing Cathodic Protection system; overall
CP system circuit diagram, CP facilities location, previous recorded data and
Etc.
 Site preparation-mobilize manpower, tools and equipment’s to site.
Checklist for tools and equipment to be used.
 Conduct general inspection on the Transformer / Rectifier unit (TRU).

2.  Pipe to Soil potential measurement sacrificial anode cathodic protection
System- Onshore structure / Insulating Flange/ MIJ location.
 Pipe to Soil potential measurement Impressed current cathodic protection system-
Onshore structure / Insulating Flange/ MIJ location
 Pipe to Soil potential measurement sacrificial anode cathodic protection system-
Well head Pipeline / Insulating Flange.
 Pipe to Seawater potential measurement Impressed current cathodic protection
system- Offshore Jacket / Insulating Flange/ MIJ location
 Pipe to Seawater potential measurement Impressed current cathodic protection
system- Offshore Riser / Insulating Flange/ MIJ location.
 Effectiveness of the isolation Joint / Monolithic isolation joint measurement
Carried out by Insulating Flange tester
JUNE-14 – AUGUST-15 ABS CONSULTING GROUP INC (ABUDHABI).
POSITION: THIRD PARTY CP INSPECTOR
CATHODIC PROTECTION INSPECTION WORK
PROJECT YAS-MINA ZAYED GAS PIPELINE PROJECT– ABU DHABI.
Client ABU DHABI GAS INDUSTRIES LTD (GASCO) - ABU DHABI
Designation CATHODIC PROTECTION INSPECTION Inspector (TPI)
 Perform routine surveillance and inspection based on construction activities.
 Inspection of various material & equipment which arrived and stored at site.
 Review quality control documentation, pertaining to cathodic protection &
instrumentation activities.
 Witnessing of testing and calibration of all kind of instruments, cables,
cathodic protection panels, Test Post, Junction boxes, Polarization cell.
 Inspecting, Testing and Pre-commissioning for the
following equipment’s;
 Temporary Anodes like magnesium, zinc
 Permanent Anodes like Mixed Metal Oxides (MMO-LIDA)
 Surge Diverter
 Polarization Cell Replacement
 Polarization Coupon with Reed Switch
 Shunt (10 A/100 mv)
 Cables as per Client Specification
 Individual Anode & Ground bed Resistance
 Test Post (IP 55)
 Reference cell Electrode (Cu-CusO4 & Ag –Agcl ,Zinc)

3. APRIL-14 – JUNE-14 I S Q SULTAN INTERNATIONAL LLC (PORTUGAL).
Position: INSPECTION ENGINEER
CATHODIC PROTECTION INSPECTION WORK
 Inspection & Carrying out ON/OFF Potential /CIP/DCVG Surveys on GASCO
Pipelines and Related Equipment
 Visual Inspection of Various above ground components like TRU Units,
Junction Boxes, and Test Points.
 Existing CP system is to be thoroughly verified against the Design
requirements/Clients requirements/NACE International Specification
Requirements.
 Interference survey and Analysis of HT Lines Running Above pipelines &
checking of various system parameters like ground bed to earth resistance ,
Zinc ribbon Anode Resistance.
NOV’-13 –APRIL-14 SARK EPC PROJECTS PVT LTD.
Position: DEPUTY MANAGER
CATHODIC PROTECTION MAINTANANCE WORK-
RELIANCE & ESSAR REFINARY OIL LTD.
SARK EPC PROJECTS PVT.LTD-Ahmadabad, India company dedicated to
CORRSION CONTROL and specialized in Cathodic Protection to compact
corrosion of underground/ submarine steel structures/pipelines/Above ground
storage/Underground storage Tank.
 Analysis of Project Specification and Requirements
 Preparing Project Completion Schedules for Various Projects with Respect to
Project Activities
 Co-ordination for Technical Clarification/Queries to Client or Site People
 Monitoring Daily Day to Day Site Installation progress activities
 Sending DPRs and MPR’s to Client
 Co-ordination for preparation of As-Built Drawings
 Carrying out the projects at the minimum cost
 Informed management regarding problems in Project and provided solutions
to remedy and prevent recurrence
 Check the integrity of existing cathodic protection system of tanks and
pipelines to verify the effectiveness through proper testing/investigation and
suggest necessary steps for Rectification
 Necessary Testing to be done for checking of various system parameters like
ground bed to earth resistance, total circuit resistance.

4.  Visual Inspection of Various above ground components like TRU Units,
Junction Boxes, and Test Points.
 Existing C P system is to be thoroughly verified against the Design
requirements /Clients requirements/NACE International Specification
Requirments.
 Verification of Monitoring facilities if installed for pipeline at regular intervals
 Carried out CIPL Survey & Inspection of All CP Related Equipment on Various
Pipeline Network of PETRONAS MYANMAR CARIGALI LTD (MYANMAR).
DEC’ 11 – NOV’-13 CORRTECH INTERNATIONAL PVT LTD.
Position: PROJECT CO-ORDINATOR.
DABHOL-BANGALORE PIPELINE PROJECT.
CORRTECH INTERNATIONAL PVT.LTD-Ahmadabad, India-A company
dedicated to CORRSION CONTROL and specialized in Cathodic Protection
to compact corrosion of underground/ submarine steel
structures/pipelines. The company is also to construction – laying of cross
country pipeline in the oil & Gas and water supply sector.
Responsibilities:
 Analysis of Project Specification and Requirements
 Preparing Project Completion Schedules for Various Projects with Respect to
Project Activities
 Conducted Soil Resistivity Surveys for various pipeline projects along the ROU
 Analysis of Soil Resistivity Survey Results and Soil Chemical Analysis Reports
 Carried out TCP and PCP Commissioning for various projects
 Carried out Various Post Commissioning Surveys like Coating
Conductance,CPL,CAT and DCVG
 Analysis of SITE SURVEY data like CPL, CAT and DCVG.
 Interference survey and Analysis of HT Lines on to pipelines and DC Traction
systems by data logging etc.
 Tentative Bill of Materials required for the execution of the Job
 Preparing Invoices for Various Projects and follow up.
 Preparing Invoices through SAP Module.
 Co-ordination with Draftsman for required Drawings of the Project
 Co-ordination with QA-QC for Materials Inspection and arrangement of Test
Certificates for the Materials
 Co-ordination for Making IMIRs, Installation Reports at Site
 Co-ordination for Technical Clarification/Queries to Client or Site People
 Monitoring Daily Day to Day Site Installation progress activities

5.  Sending DPRs and MPR’s to Client
 Co-ordination for preparation of As-Built Drawings
 Coordinating for CP Materials arrangement to dispatch to site along with
stores and Purchase
 Carrying out the projects at the minimum cost
 Informed management regarding problems in Project and provided solutions
to remedy and prevent recurrence
 Logged test results and recorded complete data of survey
 Effective team player with proficiency in coordinating with the unit head to
understand the process requirements & Schedule the work flow accordingly.
 Inspection of Sacrificial system and Co-ordination for Dabhol -Bangalore
Pipeline Project of M/s. GAIL
May’ 09 – DEC’11 CORRTECH INTERNATIONAL PVT LTD.
Position: SITE ENGINEER.
DABHOL-BANGALORE PIPELINE PROJECT.
• Inspection of Sacrificial System & ICCP for Dadri- Bawana Pipeline Project of M/s.GAIL
• Inspection of Sacrificial System & ICCP for Bawana-Nangal Pipeline Project of M/s.GAIL
• Inspection of Sacrificial system for Dahej-Vijaipur Pipeline Project of M/s.GAIL
• Inspection of Sacrificial system & ICCP for Mundhra-Bathinda Pipeline Project of M/s.HPCL
Responsibilities:
 Conducted Soil Resistivity Surveys for various pipeline projects along the ROU
 Analysis of Soil Resistivity Survey Results and Soil Chemical Analysis Reports
 Carried out TCP and PCP Commissioning for various project
 Co-ordination for Making IMIRs, Installation Reports at Site
 Co-ordination for Technical Clarification/Queries to Client or Site People
 Monitoring Daily Day to Day Site Installation progress activities
 Sending DPRs ,WPRs and MPR’s to Client
 Preparing Site Requirement Monthly wise

6. Computer Proficiency:
 WELL EXPERIENCED MS-WORD, MS-EXCEL, MS-POWER POINT.
PERSONAL DETAILS
 Father’s Name : M.MARIAPPAN,
 Gender : Male,
 D.O.B : 13.03.1986,
 Pass port & Expiry : H 6219371 & 04.08.2019
 Nationality : Indian.
 Marital Status : Single.
 Languages Known : English, Hindi, Tamil, and Kannada & Malayalam.
 Driving License : 2231880 (UAE) & Exp.Date.01-06-2025
 Permanent Address : Senaiyar Kinathadi Street(west)
Vasudevanallur -627758
Sivagiri (Taulk)
Thirunelveli (District)
Tamil Nadu
India
FUTURE OUT LOOK
To enhance abilities through exposure to latest technologies, achieve a steady
enhancement in career by Being loyal to the company and growing together.

7. PLACE: KUALA BELAIT, BRUNEI. M.RAMASAMY