3. 3http://sintistechnology.com
COMPANY PROFILE OF SINTIS
ACTIVITY: production, research, design and trade of military and industrial electronics, systems
and devices for radio controlled counteraction and protection of information.
Devices for radio-electronic war:
Radio jamming transmitters for one-time use designed for artillery and jet systems;
Wide-band and target radio jamming devices with a 1.5 ÷ 6000 MHz band and capac-
ity up to 4000W;
Antiterrorist portable transmitters for protection from radio controlled bombs.
Devices for protection of information:
Wide-band scanning systems with correlation analysis;
Appliances for protection from acoustical and laser sound locators;
Non-lineal detectors for mines and sound locators detection;
Detectors for radio-microphones detection;
Telephone detectors for phone tapping detection;
Appliances for protection from sound locators in the power supply network.
The company has the exclusive copy rights and know-how over the technical decisions imple-
mented in the radio jamming transmitters produced by the Bulgaria defense industry
SOME OF THE MOST IMPORTANT PRODUCTS OF SINTIS ARE:
Radio jamming transmitters for one-time use with artillery carriers (STARSHEL), for
122 and 152mm shells;
Radio jamming transmitters for one-time use with artillery carriers (LILIA), for 122
and 152mm shells;
Radio jamming transmitters for one-time use with artillery carriers (3NS30 radio jam-
mer cargo projectile), fired with 122mm artillery systems М30, D30, 2С1 and 152mm D20,
2C3M, 2A65, 2C19; (joint development with Russia), Check-Military Parade-1994 Septem-
ber-October and 2/20/97-March-April.;
Stationary system for protection from sound locators (КАКТUS);
Specialized software (VRS SOFTWARE, JAMM SOFTWARE FOR VRS-546 ARTIL-
LERY ROUNDS WITH EXPENDABLE JAMMERS COPYRIGHT 1994-1997, Version 5.5);
Specialized software (VRS SOFTWARE, JAMM SOFTWARE FOR VRS-542 ARTIL-
LERY ROUNDS WITH EXPENDABLE JAMMERS COPYRIGHT 2003, Version 3.0);
Antiterrorist portable and mobile jamming devices.
5. 5http://sintistechnology.com
Very high power jamming systems, 1,5 - 6,000 MHz (Perspective R&D Horizon
~ up to 9,000 MHz)
Vehicular Jamming system (Military and VIP convoy protection to counter re-
motely controlled improvised explosive devices)
Multi band Jamming system (Portable multi band cellphone jammer, VHF/UHF
pelican Jammer)
Indoor and Outdoor Jammers (Cellphone Jammers, GPS Jammers, Wireless
camera Jammers)
Cell phone & Wireless camera detector for the protection of troop transportation,
Military and Police checkpoints, large Governmental establishments, Bomb Dispos-
al Squads and VIP convoys
6. 6 http://sintistechnology.com
USA - antiterrorist portable and mobile jamming devices;
Russia – mobile antiterrorist jamming devices;
UK – systems for Information Security;
China – artillery jamming devices for one-time use;
Egypt – mobile and portable antiterrorist jamming devices;
Kazakhstan – mobile and portable antiterrorist jamming devices;
Afghanistan – mobile antiterrorist jamming devices for the Special
Forces;
República de Guinea Ecuatorial – mobile and portable antiterrorist
jamming devices;
Bulgaria – artillery jamming devices for one-time use, mobile and por-
table antiterrorist jamming devices and special equipment for the needs of
the armed forces, the police and the special services.
SINTIS sells and has sold its products in:
Note: Now, due to destinguished records of excellence, our markets spread out to North and South
America, Eastern and Western Europe, Africa, and Southeast Asia. We enjoy a good reputation in
those areas because of our sophisticated products’ strong and outstanding performance, with more than
20 years’ OEM experience
8. 8 http://sintistechnology.com
SINTIS ANTITERRORIST BOMBJAMMERS
POWERFUL SAFETY
MORE THAN FORTY YEARS EXPERIENCE IN RADIOELECTRONIC WARFARE
HOW THE PRODUCTS
OF SINTIS PROTECT YOU
IED - IMPROVISED EXPLOSIVE DEVICE;
BJ - BOMB JAMMER;
Kp - PROTECTION COEFFICIENT;
Protection coefficient is equal to the ratio of the distance around the jammer, in which
the IED could not be activated and the distance between the terrorist and the IED:
Kp = Djbp / Dtb
h - Coefficient of radio jamming efficiency;
n - Ratio interference/signal where IED is not activated;
Pb - Power of the terrorist transmitter;
Pj - Power of the jammer;
∆fb - Frequency band of the IED receiver;
∆fj - Frequency band of the jammer.
Kp = {[ h*Pj*∆fb ] / [ n* Pb*∆fj ]}1/4
ENSURING PROTECTION OF REMOTELY ACTIVATED IED REQUIRES ENERGY
SOURCE PROPORTIONAL TO THE PROTECTION COEFFICIENT
http://di.mod.bg/conference/ DEFENCE INSTITUTE - MINISTRY OF DEFENCE -
BULGARIA
CONFERENCE – MILITARY TECHNOLOGIES AND SYSTEMS /MT&S-2011/, 08
and 09 December 2011
Central Military Club, SOFIA
INTERNATIONAL CONFERENCE “SMART DEFENCE SOLUTIONS AND TECHNOL-
OGIES” BULGARIA, PLOVDIV, INTERNATIONAL FAIR, 31 MAY – 1 JUNE 2012
http://www.hemusbg.org/index.h™l
DEFENCE INSTITUTE - MINISTRY OF DEFENCE - BULGARIA
RELIABILITY SECURITY PROPRIETY
10. 10 http://sintistechnology.com
1). The protective distance is given as a percent of the length of the radio line that activates the ex-
plosive/bomb (distance between terrorist and bomb). For example: For the last 3 models the protective
distance is ≥35%, i.e., if the terrorist is at a distance of 300 m from the bomb, the protective distance is
more than 105m (0.35 х 300m =105m).
The protective distance is defined /from tests/ according to the following conditions:
- The terrorist uses radio transmitter with power equal to 5 W;
- The Radio receiver /inside the bomb/ that activates the bomb is situated on the ground.
2). The protective distance is more 100m for all types cellular phones (900MHz, 1800MHz and 3G)
and satellite phones and GPS.
MODELS SINTIS BJ™
VIP300X MOBILE JAMMERS
IED PROTECTION TECHNOLOGY
SINTIS BJ™
VIP300X2V4KV
PARAMETERS
MODEL Transmitting Range Output Power Power supply Protective
modules (units) (MHz) (W) (W) distance, % 1) 2)
20÷88; 134÷870;
BJ™VIP-300Х2v1 ≤ 24 890÷1880; 1930÷1990; > 650 ≈ 4 000 ≥15%
2110÷2170; 2400÷2500
BJ™VIP-300Х2v2 ≈ 24 20÷2500 > 800 ≈ 5 000 ≥5%
BJ™VIP-300Х2v3L ≈ 24 20÷3000 > 1000 ≈ 6 000 ≥15%
20÷88; 134÷870;
BJ™VIP-300Х2v1P ≤ 24 890÷1880; 1930÷1990; > 1400 ≈ 8 000 ≥25%
2110÷2170; 2400÷2500
BJ™VIP-300Х2v2P ≥ 24 20÷2500 > 1600 ≈ 9 000 ≥25%
BJ™VIP-300Х2v3 ≥ 24 20÷3000 > 1800 ≈ 10 000 ≥25%
BJ™VIP-300Х2v3P ≥ 32 20÷3000 > 2100 ≈ 12 000 ≥35%
BJ™VIP-300Х2v4 ≥ 38 20÷6000 > 2500 ≈ 14 500 ≥35%
BJ™VIP-300Х2v4KV 42 2 ÷ 6000 > 2650 ≈ 15 000 ≥35%
14. 14 http://sintistechnology.com
BJ™VIP-300X2v4KV Mobile Jammer is equipped with 42 modules. They are wide-band
and cover the frequency range of 2 MHz – 6 000 MHz. The frequency ranges and the separate
modules power are determined for jamming the ones most-frequently used in terrorist acts,
including those of robots, the receivers of cellular and satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which is mounted
on the top of the vehicle. BJ™VIP-300X2v4KV is controlled from a remote control unit, which
is situated inside the vehicle.
BJ™VIP-300X2v4KV complies with the requirements for work in static and mobile modes.
It has its own shock absorbing system and a filter-ventilation unit. It is equipped with an elec-
tronic protection system, which ensures its flawless operation.
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 2 ÷ 6000
2. Total output power, W ≥ 2650
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≤ 15 000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Weight, kg
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
11. Indications
of normal power supply;
“Transmission”/”Stand-by”
12. Protection for the operating personnel, standards SAR; STANAG 2345
13. Protection Distance, m ≥ 105
MOBILE JAMMER BJ™VIP-300X2v4KV
THE PURPOSE OF THE JAMMER
IS TO ENSURE PROTECTION
FROM RADIO-CONTROLLED
BOMBS
15. 15http://sintistechnology.com
BJ™VIP-300X2v4KV-C Mobile Jammer is equipped with 40 modules. They are
wide-band and cover the frequency range of 2 MHz – 6 000 MHz. The frequen-
cy ranges and the separate modules power are determined for jamming the ones
most-frequently used in terrorist acts, including those of robots, the receivers of
cellular and satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which
is mounted on the top of the vehicle. BJ™VIP-300X2v4KV-C is controlled from a
remote control unit, which is situated inside the vehicle.
BJ™VIP-300X2v4KV-C complies with the requirements for work in static and
mobile modes. It has its own shock absorbing system and a filter-ventilation unit.
It is equipped with an electronic protection system, which ensures its flawless op-
eration.
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 2 ÷ 6000
2. Total output power, W ≥ 2650
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≤ 15 000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Weight, kg
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
11. Indications
of normal power supply;
“Transmission”/”Stand-by”
12. Protection for the operating personnel, standards SAR; STANAG 2345
13. Protection Distance, m ≥ 105
MOBILE JAMMER BJ™VIP-300X2v4KV-C
THE PURPOSE OF THE JAMMER
IS TO ENSURE PROTECTION
FROM RADIO-CONTROLLED
BOMBS
16. 16 http://sintistechnology.com
BJ™VIP-300X2v4 Mobile Jammer is equipped with 32 modules. They are wide-
band and cover the frequency range of 2 MHz – 6 000 MHz.
The frequency ranges and the separate modules power are determined for jam-
ming the ones most-frequently used in terrorist acts, including those of robots, the
receivers of cellular and satellite phones, as well as GPS systems. The modules are
mounted in one common transmitter unit (rack case), which is mounted on the top
of the vehicle.
BJ™VIP-300X2v4 is controlled from a remote control unit, which is situated in-
side the vehicle.
BJ™VIP-300X2v4 complies with the requirements for work in static and mobile
modes. It has its own shock absorbing system and a filter-ventilation unit. It is
equipped with an electronic protection system, which ensures its flawless operation.
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 2 ÷ 6000
2. Total output power, W ≥ 2500
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≤ 14 500
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Weight, kg
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
11. Indications
of normal power supply;
“Transmission”/”Stand-by”
12. Protection for the operating personnel, standards SAR; STANAG 2345
13. Protection Distance, m 105
MOBILE JAMMER
BJ™VIP-300X2v4
THE PURPOSE OF THE
JAMMER IS TO ENSURE
PROTECTION FROM RA-
DIO-CONTROLLED BOMBS
17. 17http://sintistechnology.com
BJ™VIP-300X2v3P Mobile Jammer is equipped with 32 modules. They are
wide-band and cover the frequency range of 20 MHz – 3 000 MHz. The frequen-
cy ranges and the separate modules power are determined for jamming the ones
most-frequently used in terrorist acts, including those of robots, the receivers of
cellular and satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which
is mounted on the top of the vehicle. BJ™VIP-300X2v3P is controlled from a re-
mote control unit, which is situated inside the vehicle.
BJ™VIP-300X2v3P complies with the requirements for work in static and mo-
bile modes. It has its own shock absorbing system and a filter-ventilation unit. It
is equipped with an electronic protection system, which ensures its flawless oper-
ation.
MOBILE JAMMER
BJ™VIP-300X2v3P
THE PURPOSE OF THE JAM-
MER IS TO ENSURE PROTEC-
TION FROM RADIO-CON-
TROLLED BOMBS
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 20÷3000
2. Total output power, W ≥ 2100
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≤ 12 000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Weight, kg ≤ 240
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
11. Indications
of normal power supply;
“Transmission”/”Stand-by”
12. Protection for the operating personnel, standards SAR; STANAG 2345
13. Protection Distance, m 105
18. 18 http://sintistechnology.com
BJ™VIP-300X2v3 Mobile Jammer is equipped with 24 modules. They are wide-band
and cover the frequency range of 20 MHz – 3 000 MHz. The frequency ranges and
the separate modules power are determined for jamming the ones most-frequently
used in terrorist acts, including those of robots, the receivers of cellular and satellite
phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which is
mounted on the top of the vehicle. BJ™VIP-300X2v3 is controlled from a remote
control unit, which is situated inside the vehicle.
BJ™VIP-300X2v3 complies with the requirements for work in static and mobile
modes. It has its own shock absorbing system and a filter-ventilation unit. It is
equipped with an electronic protection system, which ensures its flawless operation.
MOBILE JAMMER
BJ™
VIP-300X2v3
THE PURPOSE OF THE
JAMMER IS TO ENSURE
PROTECTION FROM RA-
DIO-CONTROLLED BOMBS
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 20÷3000
2. Total output power, W ≥ 1800
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≤ 10000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Weight, kg ≤ 120
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
11. Indications
of normal power supply;
“Transmission”/”Stand-by”
12. Protection for the operating personnel, standards SAR; STANAG 2345
19. 19http://sintistechnology.com
BJ™VIP-300X2v3L Mobile Jammer is equipped with 24 modules. They are wide-
band and cover the frequency range of 20 MHz – 2 500 MHz. The frequency ranges
and the separate modules power are determined for jamming the ones most-fre-
quently used in terrorist acts, including those of robots, the receivers of cellular and
satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which is
mounted on the top of the vehicle. BJ™VIP-300X2v3L is controlled from a remote
control unit, which is situated inside the vehicle.BJ™VIP-300X2v3L complies with
the requirements for work in static and mobile modes. It has its own shock absorb-
ing system and a filter-ventilation unit. It is equipped with an electronic protection
system, which ensures its flawless operation.
MOBILE JAMMER BJ™VIP-300X2v3L
THE PURPOSE OF THE JAMMER IS TO ENSURE PRO-
TECTION FROM RADIO-CONTROLLED BOMBS
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 20 ÷ 2500
2. Total output power, W ≥ 1000
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≈ 6000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Weight, kg ≤ 120
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
11. Indications
of normal power supply;
“Transmission”/”Stand-by”
12. Protection for the operating personnel, standards SAR; STANAG 2345
20. 20 http://sintistechnology.com
MOBILE JAMMER
BJ™VIP-300X2v2P
THE PURPOSE OF THE JAMMER IS TO ENSURE
PROTECTION FROM RADIO-CONTROLLED BOMBS
BJ™VIP-300X2v2P Mobile Jammer is equipped with 24 modules. They are wide-
band and cover the frequency range of 20 MHz – 2 500 MHz. The frequency ranges and
the separate modules power are determined for jamming the ones most-frequently used
in terrorist acts, including those of robots, the receivers of cellular and satellite phones,
as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which is
mounted on the top of the vehicle. BJ™VIP-300X2v2P is controlled from a remote con-
trol unit, which is situated inside the vehicle.
BJ™VIP-300X2v2P complies with the requirements for work in static and mobile
modes. It has its own shock absorbing system and a filter-ventilation unit. It is equipped
with an electronic protection system, which ensures its flawless operation.
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 20÷2500
2. Total output power, W > 1600
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≈ 9000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+550
)
8. Weight, kg ≤ 120
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
Indications Of normal power supply;
“Transmission”/”Stand-by”
Protection for the operating personnel, standards SAR; STANAG 2345
21. 21http://sintistechnology.com
BJ™VIP-300X2v2 Mobile Jammer is equipped with 24 modules. They are wide-
band and cover the frequency range of 20 MHz - 2 500 MHz. The frequency ranges
and the separate modules power are determined for jamming the ones most-fre-
quently used in terrorist acts, including those of robots, the receivers of cellular and
satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which
BJ™VIP-300X2v2 is mounted on the top of the vehicle. I si UAkVJ I гДстцжУл^ is
controlled from a remote control unit, which is situated inside the vehicle.
BJ™VIP-300X2v2 complies with the requirements for work in static and mobile
modes. It has its own shock absorbing system and a filter-ventilation unit. It is
equipped with an electronic protection system, which ensures its flawless operation.
MOBILE JAMMER
BJ™VIP-300X2v2
THE PURPOSE OF THE JAM-
MER IS TO ENSURE PROTEC-
TION FROM
RADIO-CONTROLLED
BOMBS
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 20÷2500
2. Total output power, W > 800
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, W ≈ 5000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+550
)
8. Weight, kg ≤ 120
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
Indications Of normal power supply;
“Transmission”/”Stand-by”
Protection for the operating personnel, standards SAR; STANAG 2345
22. 22 http://sintistechnology.com
BJ™ VIP-300X -Discreet Mobile Jammer is equipped with 4, 6 or 8 modules.
They are wide-band and cover the frequency range of 20 MHz – 2 500 MHz. The
frequency ranges and the separate modules power are determined for jamming the
ones most-frequently used in terrorist acts, including those of robots, the receivers
of cellular and satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which is
located in the trunkof the vehicle. BJTM
VIP-300X-Discreet is controlled from a re-
mote control unit, which is situated inside the vehicle.
BJTM
VIP-300X-Discreet complies with the requirements for work in static and
mobile modes. It has its own shock absorbing system and a filter-ventilation unit. It
is equipped with an electronic protection system, which ensures its flawless operation.
MOBILE JAMMER
BJTM
VIP-300-Discreet
THE PURPOSE OF THE JAMMER IS TO ENSURE HIDDEN
(INVISIBLE) PROTECTION FROM RADIO-CONTROLLED BOMBS
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 20÷2500
2. Total output power, W > 400
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, V 12 / 24 DC
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+550
)
8. Weight, kg ≤ 20
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
Protection for the operating personnel, standards SAR; STANAG 2345
23. 23http://sintistechnology.com
MOBILE JAMMER
BJ™
VIP-300X2v1
THE PURPOSE OF THE
JAMMER IS TO ENSURE
PROTECTION FROM
RADIO-CONTROLLED
BOMBS
BJ™ VIP-300X2v1 Mobile Jammer is equipped with 24 modules. They are
wide-band and cover the frequency range of 20 MHz – 2 500 MHz. The frequen-
cy ranges and the separate modules power are determined for jamming the ones
most-frequently used in terrorist acts, including those of robots, the receivers of
cellular and satellite phones, as well as GPS systems.
The modules are mounted in one common transmitter unit (rack case), which
is mounted on the top of the vehicle. BJ™
VIP-300X2v1 is controlled from a remote
control unit, which is situated inside the vehicle.
BJ™
VIP-300X2v1 complies with the requirements for work in static and mobile
modes. It has its own shock absorbing system and a filter-ventilation unit. It is
equipped with an electronic protection system, which ensures its flawless operation.
TECHNICAL SPECIFICATION
Parameters Presence
20÷88; 134÷870;
1. Jamming range, MHz 890÷1880; 1930÷1990;
2110÷2170; 2400÷2500
2. Total output power, W > 650
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, V 12 / 24 DC
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+550
8. Weight, kg ≤ 120
9. Controls Remote control unit (from the cabin)
10. Switches On every single module / For all modules
Protection for the operating personnel, standards SAR; STANAG 2345
24. 24 http://sintistechnology.com
The BJ™VIP-300X2v3H Mobile
Jammer is designed to ensure protec-
tion from remotely activated explosive
devices via radio-control.
It is mounted onto HMMWV “Hum-
vee” and protect single or group moving
objects, groups of people and/or other
limited area targets.
PRODUCER: “Sintis” Ltd, Bulgaria
NATO CODE OF THE PRODUCER: 00PXU
NATO PART NUMBER: 001007
NATO STOCK NUMBER: 5865-50-001-1656
The BJ™VIP-300Xv3SL Mobile Jammer is a modular device, which consists of
separate transmitter modules. It is equipped with minimum 13 modules. They are
wide-band and cover the frequency range of 25÷6000 MHz. The frequency ranges
and the separate modules power are determined for jamming the ones most-fre-
quently used in terrorist acts, including those of robots, the receivers of cellular and
satellite phones.
The modules are mounted in one common transmitter unit (rack case), which
is mounted on the top of the vehicle. Each module works with its own antenna.
The antennas are wide-band and radiate circularly. They are integrated within the
transmitter unit and the length of feeders, connecting them with the appropriate
transmitter modules, is the minimum possible one. This increases the effectiveness
of the Jammer and its efficiency. Besides, it facilitates its mounting and demounting.
Parts of the antennas are installed inside transmitter unit and are not seen from
outside.
The modules are to be controlled both from their own front panel via central
control unit, inside the common unit, and from a remote control unit. The remote
control unit is situated inside the cabin of the vehicle.
The BJ™VIP-300X2v3H Mobile Jammer corresponds to the requirements of pro-
fessional equipment working stationary and in motion. It has been engineered ac-
cording to MIL810F NATO Standard. It has amortization system and filter-venti-
lation unit, which assures its compulsory air-cooling.
The jammer has an automatic protection system, which ensures its flawless oper-
ation. This system monitors the operation modes of the transmitter modules and the
normal emission of the respective antennas. It keeps the monitored parameters in
safety ranges. In the case of inadmissible changes in operation modes (i.e. no cooling
and others) the protection system shuts down the corresponding module.
CONVOY JAMMER BJ™VIP-300X2v3H
25. 25http://sintistechnology.com
The indication system secures the operator in the properly working of the Jam-
mer. It monitors normal supplying of the power, readiness for working of the trans-
mitter modules, as well as transmitting of high-frequency energy to the antennas.
The security of servicing personnel is assured according to BDS14525-90 and
BDS17137-90 Bulgarian Standards, SAR EU Standard, as well as STANAG2345
NATO Standard.
2. Total Power output, [W] ≥ 850
3. Interference Type Fast Random Sweep (FRS)
4. Interference Category Barrage
5. Power supply:
24 V, 7 kW, computer controlled auto-start
diesel generator with start-up battery;
5.1. Additional Batteries for buffering
and emergency cases
4 pcs.
6. Operation time Unlimited with generator running
7. Operating temperature, [0
С] from -40° to +550
8. Weight, [kg] ≈ 210
9. Dimensions, [mm] ≤ 1200x800x400
10. Safety of the operators, standards BDS 14525-90; SAR; STANAG2345
GENERAL TECHNICAL PARAMETERS
FREQUENCY RANGE 2
5 MHz – 6000 MHz
Frequency Range[MHz]
Module Antenna
Output Power [W] Configuration
1. Transmitter ranges: 13
Band 1. 25÷ 500 100 Omni-Directional
Band 2. 500 ÷ 1000 50 Omni-Directional
Band 3. 1000 ÷ 2000 50 Omni-Directional
Band 4. 2000 ÷ 2500 50 Omni-Directional
Band 5. 2500 ÷ 3000 25 Omni-Directional
Band 6. 3000 ÷ 4000 25 Omni-Directional
Band 7. 4000 ÷ 5000 25 Omni-Directional
Band 8. 5000 ÷ 6000 25 Omni-Directional
Band 9. 140 ÷ 170 100 Omni-Directional
Band 10. 430 ÷ 470 100 Omni-Directional
Band 11. 800÷1000 switchable 100 Omni-Directional
Band 12. 1800 ÷2000 switchable 100 Omni-Directional
Band 13. 2110 ÷ 2170 100 Omni-Directional
27. 27http://sintistechnology.com
PORTABLE JAMMING DEVICE BJ™VIP-200CCS
(device for support of crime counteraction)
The purpose of the portable radio jammer BJTM-
VIP-200CCS is to ensure individual protection from
radio-controlled bombs. device may be used by individ-
uals and from vehicles.
The JAMMER transmits barrage radio jamming signals in the
frequency bands, which are most commonly used for detonating ra-
dio-controlled bombs. Supplied in the safety box.
BJ™VIP-200CCS is a modular device. It is fitted in a standard shock
proof briefcase, including type “Pelican” shock proof case and consists of 4 wide-band transmit-
ter modules. Each module works with a separate transmitting antenna. The internal antennas
are made on a PCB. There is also an option for external antennas. Cooling Type - Forced.
BJ™VIP-200CCS complies with the requirements for professional equipment, working in
static and mobile modes. It has an automatic electronic protection system and LCD indication.
The protection system ensures the jammer’s flawless operation and the indication system shows
its status, including the presence of radio transmission.
TECHNICAL SPECIFICATION
Parameters Presence
1. Frequency ranges, MHz 20 ÷ 500 MHz;
2. Total output RF power, W > 60
3. Cooling Type Forced
4. Antennas Built-in and external
5. Category of the jamming Barrage; FRS (fast random scanning)
6. Internal power supply Rechargeable battery, 12 V with built-in battery charger
7. Internal battery option Extra battery pack
8. Internal battery standby > 48 hours
9. External power supply
On-board power supply (DC) from 10.2 V to 16 V;
Mains power (AC): from 96V to 246V/50, 60, 440 Hz
10. Operation time, min
From the internal battery: ≥ 60
From external power supply: unlimited
11. Working temperature, 0
С From - 300
to +600
(degree Celsius)
12. Storage Temperature: From - 400
to +800
(degree Celsius)
13. Protection Over Current Protection / Over Voltage Protection
14. Protection for the operating
personnel
standard SAR, STANAG 2345 and BG standards
Radio line that controls the bomb
Protection distance*
, m
Distance between the transmiter Out put power of the
(reference data)
and the receiver, m transmiter, W
≥ 90 ≥ 200 ≤ 0,1
≥ 90 ≥ 350 ≤ 1
≥ 90 ≥ 500 ≤ 5
≥ 90 ≥ 10 car remote control
NOTE: (*). Protection distance*
– this is the distance between the jammer and the receiver of the
radio line that controls the bomb. The shown intervals define the protection distance at different
environmental conditions.
28. 28 http://sintistechnology.com
BJ™VIP-200MP is a modular device. It is fitted in a two standard briefcases and consists
of 8 transmitter modules. Two of them is wide-band. The others jam the receivers of cellular
phones. Each module works with a separate transmitting antenna. The internal antennas
are made on a PCB. There is also an option for external antennas.
BJ™VIP-200MP complies with the requirements for professional equipment, working in
static and mobile modes. It has an automatic electronic protection system and indication.
The protection system ensures the jammer’s flawless operation and the indication system
shows its status, including the presence of radio transmission.
PORTABLE JAMMING DEVICE BJ™VIP-200MP
(Briefcases, ESPECIALLY FOR USE BY THE MILITARY POLICE)
The purpose of the portable radio jammer BJTM
VIP-200MP is to en-
sure individual protection from radio-controlled bombs.
It transmits barrage radio jamming signals in the frequency bands,
which are most commonly used for detonating radio-controlled bombs.
TECHNICAL SPECIFICATION
Parameters Presence
Wireless communications: 20 ÷ 530 MHz;
Communication band: 800 ÷ 900 MHz;
1. Frequency ranges, MHz GSM: 900; 1800; 3600 MHz;
SAT 1520, 1680 MHz, Wi-Fi (WLAN)
SAT 2400, 2500 MHz
2. Total output power, W >90
3. Antennas Built-in and external
4. Category of the jamming
Barrage;
FRS, with 1-channel window from 136÷174 MHz
5. Internal power supply Rechargeable battery, 12 V
6. Battery charger Built-in
7. External power supply On-board power supply (DC) from 10.2 V to 16 V;
Mains power (AC): from 96V to 246V/50, 60, 440 Hz
8. Operation time, min From the battery: ≥ 60
From external power supply: unlimited
9. Working temperature, 0
С from -300
to +550
10. Weight, kg ≤ 2x20
11. Remote control by cable Up to 50 m
12. Protection for the operating
personnel
standard SAR, STANAG 2345 and BG standards
Radio line that controls the bomb
Protection distance*
, m
Distance between the transmiter Out put power of the
(reference data)
and the receiver, m transmiter, W
≥ 20 ≥ 150 ≤ 0,1
≥ 20 ≥ 250 ≤ 1
≥ 20 ≥ 500 ≤ 5
≥ 20 ≥ 10 car remote control
NOTE: (*) Protection distance*
– this is the distance between the jammer and the receiver of the radio
line that controls the bomb. The shown intervals define the protection distance at different environ-
mental conditions.
29. 29http://sintistechnology.com
TECHNICAL SPECIFICATION
Parameters Presence
BJ™VIP-200CP1 BJ™VIP-200CP2
GSM: 810* 895/ 925- 960 GSM: 810- 895/ 925- 960
1.1. Frequency bands, MHz GSM: 1805-1880 / 1930-1990 GSM: 1805-1880 /1930-1990
3G: 2110- 2170 3G: 2110-2170
2. Total output power, W > 40 >40
3. Antennas One triband external antenna Built in;
One triband external antenna
4. Interferences:
4.1. Type Fast random scanning (FRS); Fast random scanning (FRS);
4.2 Category barrage barrage
5. Own power supply Rechargeable battery, 12 V
6. Battery charger External, portable External, portable
7. External power supply On- board network (DC): On- board network (DC):
with simultaneous charging of 11V- 15V; 22V-28V 11V - 15V; 22V-28V
the own power supply Alternate current network (AC): Alternate current network (AC):
100V ~ 250V / 50; 60Hz 100V ~ 250V/ 50; 60Hz
From external power supply:
From own power supply: >60
8. Operation duration, min
unlimited
From external power supply:
unlimited
9. Working temperature, °C from -40° to +55° from -40° to +55°
10. Weight, kg
10.1. Operating unit (briefcase) < 8 < 14
10.2. Battery charger with
transportation packing < 3 < 3
11. Remote control with cable up to 50m up to 50m
Safety for the operating BDS14525-90; SAR; BDS14525-90; SAR;
personnel, standards STANAG 2345 STANAG 2345
Protection distance *, m > 20 > 20
NOTE: 1). PROTECTION DISTANCE - this is the distance from the radio jammer to the radio receiver of the
radio line that controls the bomb.
The Radio jammer BJ™VIP-200CP is a modular device. It is placed in a standard suit-
case. It consists of three transmitting modules. Each module operates with a separate trans-
mitting antenna. There can be used three external antennas or one common triband exter-
nal antenna. BJ™VIP-200CP complies with the requirements for professional equipment
operating stationary or in motion. There are automatic protection and indication systems.
The protection secures the flawless operation of the device. The indication system displays its
moment condition including the emission from the antennas.
Theportableradiojammer(briefcase)BJ™VIP-200CPprovidespersonalpro-
tection from bombs, remotely activated with cellular phones.
It emits barrage signals that do not allow the receiving device activating the
bomb to receive the corresponding command.
The device is offered in two versions: BJ™VIP-200CPv1 and BJ™VIP-200CPv2.
BJ™VIP-200CPv1 can operate only with external power supply (in a vehicle
or indoors, where AC network is available).
BJ™VIP-200CPv2 has the functionality of BJ™VIP-200CPv1. but it can also
operate carried by a person.
PORTABLE JAMMING DEVICE BJ™VIP-200CP (Briefcase)
30. 30 http://sintistechnology.com
BJ™VIP-200CT is a modular device. It is fitted in a standard briefcase and consists
of 4 transmitter modules. You jam receivers of cellular phones. Each module works
with a separate transmitting antenna. The internal antennas are made on a PCB.
There is also an option for external antennas.
BJ™VIP-200CT complies with the requirements for professional equipment, work-
ing in static and mobile modes. It has an automatic electronic protection system and
indication. The protection system ensures the jammer’s flawless operation and the
indication system shows its status, including the presence of radio transmission.
TECHNICAL SPECIFICATION
Parameters Presence
NMT: 400 ÷ 520
1. Frequency ranges, MHz GSM: 810 ÷ 895 / 925 ÷ 960
GSM: 1805 ÷ 1880 / 1930 ÷ 1990
3G: 2110 ÷ 2170
2. Total output power, W >55
3. Antennas Built-in or external
4. Category of the jamming Barrage; Fast random scanning
5. Internal power supply Rechargeable battery, 12 V
6. Battery charger Built-in
7. External power supply with simulta- On-board power supply (DC) from 11 V to 15 V;
neous charging of the battery Mains power (AC): from 100V to 250V/50, 60, 440 Hz
8. Operation time, min
From the battery: ≥ 60
From external power supply: unlimited
9. Working temperature, 0
С From -40° to +55°
10. Weight, kg ≤ 16
11. Remote control by cable Up to 100 m
12. Protection for the operating personnel Standard SAR and Standard STANAG 2345
13. Protection distance* ≥ 20 m
NOTE: (*). Protection distance*– this is the distance between the jammer and the
receiver of the radio line that controls the bomb.
The purpose of the portable radio jam-
mer BJTM
VIP-200CT is to ensure individu-
al protection from radio-controlled bombs.
It transmits barrage radio jamming signals in the frequency bands,
which are most commonly used for detonating radio-controlled bombs.
PORTABLE JAMMING DEVICE
BJ™VIP-200CT
(Briefcase)
31. 31http://sintistechnology.com
BJ™VIP-200BP is a modular device. It is fitted in a standard briefcase and con-
sists of 4 transmitter modules. You jam receivers of cellular phones. Each module
works with a separate transmitting antenna. The internal antennas are made on a
PCB. There is also an option for external antennas.
BJ™VIP-200BP complies with the requirements for professional equipment, work-
ing in static and mobile modes. It has an automatic electronic protection system and
indication. The protection system ensures the jammer’s flawless operation and the
indication system shows its status, including the presence of radio transmission.
BACKPACK JAMMING DEVICE BJ™VIP-200BP
(Backpack - briefcase)
THE PURPOSE OF THE BACKPACK RADIO JAMMER
BJ™VIP-200BP IS TO ENSURE INDIVIDUAL PROTECTION
FROM RADIO-CONTROLLED BOMBS – APPLICABLE FOR
BOMB DISPOSAL.
IT TRANSMITS BARRAGE RADIO JAMMING SIGNALS IN
THE FREQUENCY BANDS, WHICH ARE MOST COMMONLY
USED FOR DETONING RADIO-CONTROLLED BOMBS.
TECHNICAL SPECIFICATION
Parameters Presence
NMT: 400 ÷ 520
1. Frequency ranges, MHz GSM: 810 ÷ 895 / 925 ÷ 960
GSM: 1805 ÷ 1880 / 1930 ÷ 1990
3G: 2110 ÷ 2170
2. Total output power, W >55
3. Antennas Built-in or external
4. Category of the jamming Barrage; Fast random scanning
5. Internal power supply Rechargeable battery, 12 V
6. Battery charger Built-in
7. External power supply with simulta- On-board power supply (DC) from 11 V to 15 V;
neous charging of the battery Mains power (AC): from 100V to 250V/50, 60, 440 Hz
8. Operation time, min
From the battery: ≥ 60
From external power supply: unlimited
9. Working temperature, 0
С From -40° to +55°
10. Weight, kg ≤ 16
11. Remote control by cable Up to 100 m
12. Protection for the operating personnel Standard SAR and Standard STANAG 2345
13. Protection distance* ≥ 20 m
NOTE: (*). Protection distance*– this is the distance between the jammer and the receiver
of the radio line that controls the bomb.
32. 32 http://sintistechnology.com
BJ™VIP-200X is a modular device. It is fitted in a stan-
dard briefcase and consists of 4 transmitter modules. One
of them is wide-band. The other two jam the receivers
of cellular phones. Each module works with a separate
transmitting antenna. The internal antennas are made on
a PCB. There is also an option for external
BJ™VIP-200X complies with the requirements for professional equipment, work-
ing in static and mobile modes. It has an automatic electronic protection system
and indication. The protection system ensures the jammer’s flawless operation and
the indication system shows its status, including the presence of radio transmission.
PORTABLE JAMMING DEVICE
BJ™VIP-200X (Briefcase)
TECHNICAL SPECIFICATION
Parameters Presence
Wireless communications: 40 ÷ 530
1. Frequency ranges, MHz
GSM: 810 ÷ 895 / 925 ÷ 960
GSM: 1805 ÷ 1880 /1930 ÷ 1990
3G: 2110 ÷ 2170
2. Total output power, W >55
3. Antennas Built-in or external
4. Category of the jamming Barrage; Fast random scanning
5. Internal power supply Rechargeable battery, 12 V
6. Battery charger Built-in
7. External power supply with simulta- On-board power supply (DC) from 11 V to 15 V;
neous charging of the battery Mains power (AC): from 100V to 250V/50, 60, 440 Hz
8. Operation time, min From the battery: ≥ 60
From external power supply: unlimited
9. Working temperature, 0
С from -40° to +55°
10. Weight, kg ≤ 16
11. Remote control by cable Up to 100 m
12. Protection for the operating personnel standard SAR and standard STANAG 2345
Protection distance*, m
Radio line that controls the bomb
(reference data) Distance between the Output power of the
transmitter and the receiver, m transmitter, W
≥ 20 ≥ 150 ≤ 0,1
≥ 20 ≥ 250 ≤ 1
≥ 20 ≥ 500 ≤ 5
≥ 20 ≥ 10 car remote control
NOTE: (*). Protection distance*, m – this is the distance between the jammer and the receiver of
the radio line that controls the bomb. The shown intervals define the protection distance at different
environmental conditions.
34. 34 http://sintistechnology.com
MOBILE TELEPHONES JAMMER MTJ™VIP-100
MTJ™VIP-100 is a multichannel jammer for interfering
cell and satellite mobile telephones. The suppressed devices loose
their synchronization with the network. The resulting effect for
the jammed device and for those who are trying to connect it is a
lack of connection.
MTJ™VIP-100 emits scanning interference in several fre-
quency ranges corresponding to the channels of the main station
- subscriber. It covers the whole committed waveband with no
possibilities of ignoring the jamming.
The device may be used in cinemas, theatres, concert halls,
libraries, churches, etc., as well as for more special cases – for signal suppression
in a definite region by the government authorities, for protection against phone –
tapping and recording of conversations by a deliberately left open mobile telephone
line.
It is produced according to an original technology, license No 108778
TECHNICAL SPECIFICATION
NMT 450; CDMA 875;
Frequency range
GSM 800/900; GSM 1800/1900; 3G;
Satellite (1520÷1670) MHz;
Satellite (2400÷2500) MHz
Subranges up to 6
Output power ≥ 90 W
Interference type Fast Random Scanning (FRS)
Interference kind barrage
Power supply 11÷15V (DC); 95 ÷ 265V/50Hz (AC)
Temperature range -40 to +55 °C
Weight (Device unit and Power supply system) ≤ 31 (18 + 13) kg
Protection area (reference data) > 400 м2
Complete SET
1. Stationary radio jammer type
SINTIS MTJTM
VIP-100c8
1 set
2. Power supply network cable 1 unit
4. Safety fuse 1 unit
5. Remote control device (optional) 1 unit
6. Remote control device cable (optional) 50 м
7. User’s manual 1 unit
8. Antennas 1 set
TRANSPORTATION
The radio jammer MTJ™VIP-100 can be transported with all kinds of transportation. It
must be well adjusted in the transportation vehicle.
35. 35http://sintistechnology.com
MOBILE TELEPHONES JAMMER MTJ™VIP-100c7
MTJ™VIP-100c7 is a multichannel jammer for interfering cell
and satellite mobile telephones. The suppressed devices loose their
synchronization with the network. The resulting effect for the
jammed device and for those who are trying to connect it is a lack
of connection.
MTJ™VIP-100c7 emits scanning interference in several frequen-
cy ranges corresponding to the channels of the main station - sub-
scriber. It covers the whole committed waveband with no possibil-
ities of ignoring the jamming.
The device may be used in cinemas, theatres, concert halls, libraries, churches,
etc., as well as for more special cases – for signal suppression in a definite region by
the government authorities, for protection against phone – tapping and recording of
conversations by a deliberately left open mobile telephone line.
It is produced according to an original technology, license No 108778
TECHNICAL SPECIFICATION
NMT 450; CDMA 875;
Frequency range
GSM 800/900; GSM 1800/1900; 3G;
Satellite (1520÷1670) MHz;
Satellite (2400÷2500) MHz
Subranges up to 7
Output power ≥ 110 W
Interference type Fast Random Scanning (FRS)
Interference kind barrage
Power supply 11÷15V (DC); 95 ÷ 265V/50Hz (AC)
Temperature range -40 to +55 °C
Weight (Device unit and Power supply system) ≤ 35 (19 + 16) kg
Protection area (reference data) > 600 м2
Complete SET
1. Stationary radio jammer type
SINTIS MTJTM
VIP-100 c8
1 set
2. Power supply network cable 1 unit
4. Safety fuse 1 unit
5. Remote control device (optional) 1 unit
6. Remote control device cable (optional) 50 м
7. User’s manual 1 unit
8. Antennas 1 set
TRANSPORTATION
The radio jammer MTJTM
VIP-100c7 can be transported with all kinds of transportation. It
must be well adjusted in the transportation vehicle.
36. 36 http://sintistechnology.com
MOBILE TELEPHONES JAMMER MTJTM
VIP-100c8
MTJTM
VIP-100c8 is a multichannel jammer for interfering
cell and satellite mobile telephones. The suppressed devices loose
their synchronization with the network. The resulting effect for the
jammed device and for those who are trying to connect it is a lack
of connection.
MTJTM
VIP-100c8 emits scanning interference in several fre-
quency ranges corresponding to the channels of the main station
- subscriber. It covers the whole committed waveband with no pos-
sibilities of ignoring the jamming.
The device may be used in cinemas, theatres, concert halls, libraries, churches,
etc., as well as for more special cases – for signal suppression in a definite region by
the government authorities, for protection against phone – tapping and recording of
conversations by a deliberately left open mobile telephone line.
It is produced according to an original technology, license No BG-108778
TECHNICAL SPECIFICATION
NMT 450; CDMA 830; CDMA 875;
Frequency range
GSM 800/900; GSM 1800/1900; 3G;
Satellite (1520÷1670) MHz;
Satellite (2400÷2500) MHz
Subranges up to 8
Output power ≥ 120 W
Interference type Fast Random Scanning (FRS)
Interference kind barrage
Power supply 11÷15V (DC); 95 ÷ 265V/50Hz (AC)
Temperature range -40 to +55 °C
Weight (Device unit and Power supply system) ≤ 35 (19 + 16) kg
Protection area (reference data) > 600 м2
Complete SET
1. Stationary radio jammer type
SINTIS MTJTM
VIP-100c8
1 set
2. Power supply network cable 1 unit
4. Safety fuse 1 unit
5. Remote control device (optional) 1 unit
6. Remote control device cable (optional) 50 м
7. User’s manual 1 unit
8. Antennas 1 set
TRANSPORTATION
The radio jammer MTJTM
VIP-100c8 can be transported with all kinds of transportation. It
must be well adjusted in the transportation vehicle.
37. 37http://sintistechnology.com
CELL-PHONE RADIO JAMMER
CPJTM
VIP-300
The cell-Phone Radio Jammer CPJTM
VIP-300 is designed to
use in vehicles and emits radio jamming barrage signals in the
frequency bands of the cell telephone systems. The radio jam-
ming signals cover the whole frequency band and they cannot
be eliminated by frequency adjustments. The radio jamming signals that get into the receivers
of the cell telephones are quasi noisy. Their structure does not allow them to be eliminated with
of amplitude or frequency manipulations (restrictions or filtration).
The jammer has an automatic protection system, which ensures its flawless operation. This
system monitors the operation modes of the transmitting modules and the normal emission of
the correspondent antennas keeping the controlled parameters in safe ranges. If the operation
modes are changed to unsafe values /for example malfunction of the cooling system, etc./ the
protection system shuts down the corresponding module.
The indication system shows to the operator that the jammer is working properly and makes
the operator feel confident. It monitors if the power supply is normal and if the antennas op-
erate normally, etc.
The security of the working personnel is guaranteed according to the Bulgarian standards
BDS 14525-90 and BDS 17137-90, the European Union standard SAR and the NATO stan-
dard STANAG 2345.
TECHNICAL SPECIFICATION
Subranges 8 (optional up to 10);
Total Output power ≥ 720 W (optional up to 900 W);
Output power per frequency range ≥ 90 W per frequency range;
Interference type Fast Random Scanning (FRS);
Interference kind barrage;
Power supply 20÷28V (DC); 95 ÷ 265V/50Hz (AC)
Temperature range -40 to +55 0
C;
Internal ventilation Air cooling;
Auto test Permanent auto-diagnosis for each frequency range;
System zeroize function;
VSWR self-control and autoprotect system;
Controls/indicators Thermo autoprotect system;
Under and over voltage autoprotect system;
Frequency range status indicator;
Secure ON/OFF switch;
Permanent autodiagnosis for each frequency range.
Jamming distance (reference data) > 120 m.
GSM /800/900; GSM /1800/1900; 3G;
ISM /900/2400/5800; GSM/E /900;
Frequency range WCDMA /900/2100; DCS /1800; UMTS /2100;
Satellite (1520÷1670) MHz - (optional);
Satellite (2400÷2500) MHz – (optional).
38. 38 http://sintistechnology.com
The BJ™
VIP-300Xv3BTR Mobile Jammer is a modular device, which consists
of separate transmitter modules. It is equipped with 24 modules at minimum. They
are wide-band and cover the frequency range of 20÷6000 MHz.
The BJ™
VIP-300X2v3BTR Mobile Jammer corresponds to the requirements of
professional equipment working stationary and in motion. It has been engineered
according to MIL810F NATO Standard. It has amortization system and filter-ven-
tilation unit, which assures its compulsory air-cooling. The jammer has an auto-
matic protection system, which ensures its flawless operation.
Producer: “SINTIS” LTD, BULGARIA
NATO code of the producer: 00PXU
NATO part number: 001007
NATO stock number: 5865-50-001-1656
CONVOY JAMMER
BJ™
VIP-300X2v3BTR
The BJ™
VIP-300X2v3BTR Mobile Jammer is de-
signed to ensure protection from remotely activated
explosive devices via radio-control.
It is mounted onto BTR-60 with diesel engine and protect single or group moving
objects, groups of people and/or other limited area targets.
39. 39http://sintistechnology.com
TECHNICAL SPECIFICATION
PARAMETERS PRESENCE
1. Jamming range, MHz 20÷6000
2. Total output power, W ≥ 1800
3. Type of interference Fast Random Sweep (FRS)
4. Mode of interference Barrage
5. Power supply, W ≤ 10000
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from (-400
) to (+600
)
8. Controls Remote control unit (from the cabin)
9. Switches On every single module / For all modules
10. Indications of normal power supply; “Transmission”/”Stand-by”
11.
Protection for the operating
personnel, standards
SAR; STANAG 2345
The security of servicing personnel is assured according to BDS14525-90 and
BDS17137-90 Bulgarian Standards, SAR EU Standard, as well as STANAG2345
NATO Standard.
Diesel engine armoured
vehicle BTR-60 D
METALIKA AB
Diesel engine –one 10 000 cm3 /6 cilinders
360 Hp, 1460 Nm torque
Transmission Smart wheeled 8x8
8 hand gears, pneumatic
Operational range 1000 km
Video Front and rear camera
Fuel consumption 19 l/100 km
Control option Hand – from touch screen;
From board computer
Speed 100 km/h
40. 40 http://sintistechnology.com
MOBILE RADIO JAMMER CCJ-2.4
Mobile radio jammer CCJ-2.4 is designated for
ensuring protection from covert
cameras observation
CCJ-2.4 radiates barrage radio-jamming. They cover wholly the radio-receiving
tract of the jammed receiving devices, have noisy character and cannot be removed
by filtration.
The jammed covert cameras devices lose their feasibility to receive the informa-
tion, intended for them, as well suspend their work.
CCJ-2.4 is controlled from a remote control unit, which is situated inside the
vehicle.
CCJ-2.4 complies with the requirements for work in static and mobile modes. It
is equipped with an
TECHNICAL SPECIFICATION
Parameters Presence
1. Jamming range, MHz 2 400 ÷ 2 500
2. Output power, W > 35
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, V 12 / 24 DC
6. Operation time with engine running Unlimited
7. Working temperature, 0
С from -400
to +550
8. Weight, kg ≤ 3
9. Controls Remote control unit
10. Indications of normal power supply;
“Transmission”/”Stand-by”
11. Protection for the operating personnel, standards SAR; STANAG 2345
41. 41http://sintistechnology.com
JAMMER GPSJ™VIP-300 radiates barrage radio-jamming. They cover wholly the
radio-receiving tract of the jammed GPS devices, have noisy character and cannot be
removed by filtration. The jammed GPS devices lose their feasibility to receive the infor-
mation, intended for them, as well suspend their worfc.
JAMMER GPSJ™VIP-300 equipped with 3 modules. They are wide-band and cover
the frequency range of 1100 MHz + 1580 MHz.
JAMMER GPSJ™VIP-300 is controlled from a remote control unit which is situated
inside the vehicle.
JAMMER GPSJ™VIP-300 complies with the requirements for work in static and
mobile modes. It is equipped with an electronic protection system, which ensures its
flawless operation.
MOBILE GPS RADIO JAMMER GPSJ™VIP-300
Mobile radio jammer GPSJ™VIP-300 is designated for
ensuring protection from GPS systems observation
It can be used for individual protection from explo-
sive devices as well. activated by means
of GPS systems
TECHNICAL SPECIFICATION
Parameters Presence
1100 -1230 MHz (Military GPS)
1.Jamming range 1230+1350 MHz (Military GPS)
1520 +1580 MHz (GPS)
3. Total output power. W > 25
3. Type of interference Fast Random Scanning (FRS)
4. Mode of interference Barrage
5. Power supply, V 12/24 DC
6. Operation time with engine running Unlimited
7. Working temperature, °C from -40° to +55°
8. Weight, kg <3
9. Controls Remote control unit (from the cabin)
10. Switches On every single module I For all modules
11. Indications of normal power supply;
‘TransmissionYStand-by*
Protection for the operating
personnel, standards
SAR; STAN AG 2345
42. 42 http://sintistechnology.com
RAVEN JW
ELECTRONIC WARFARE DRONE SYSTEM
The Electronic Warfare Drone System RAVEN JW comprises a small, hardly detectable
aircraft that can carry means for electronic warfare at a distance of more than 50 km
from the place of its launching. In flight above 1000 m it effectively suppresses radio links
to a range of 10000m in a wide frequency range 20 ÷ 6000 MHz. When penetrating above
the enemy and in the barraging zone it flies in a completely autonomous mode.
В. Airborne jammer AJ™300X
AJ™300X jammer is a dedicated device for suppression of tactical and airborne radio communication
links as well as communication links for aviation command and guidance in 20÷6 000 MHz frequen-
cy range. It is used for locking of speech and digital radio communications in the range mentioned
above. AJ™300X creates intensive wideband noise jamming of dedicated spectrum which saturates
practically the whole frequency range radius. The jamming transmitted suppresses the operation of
hostile technical reconnaissance devices located in jammer’s area of operation.
Transmitting modules 38 pcs Jamming range 20÷6000 MHz
Power of each sub-band ≈ 50 W Mode of jamming wideband
Power supply for one Type of jamming Fast random scanning
transmitting module ≈ 200 W Control Remote program control
TACTICAL USE
А. UNMANNED AERIAL VEHICLE
Unmanned airial vehicles (UAV) RAVEN JW is all-composites cantilever monoplane conventional
configuration with piston engine. The guidance and control systems comprise ground control station
and the board control system (autopilot, GPS-receiver, transmitter for teleinformation, receiver for
telecontrol, primary information unit and piloted sensors). Remotely piloting system provides direct
remote piloting by an operator and programmed autonomous flight.
Spread /of wings/ 4.5 m Range of operation above 150 km
Length (without of antennas) 4.6 m Durance of flight >3 h
Height (without of antennas) 1.86 m Speed range 80÷180km/h
Power supply system > 2000 W Cruising speed > 150 km/h
Effective load at distance 150 km > 35 kg Operating heights 200 ÷ 3000 m
Working temperature, 0
С -400
÷ +550
Control With autopilot
Hours of flying between two Maximum distance
technical maintenance
250 h
of preprogramming
> 40 km
43. 43http://sintistechnology.com
RADIOJAMMER
WITH ARTILLERY SHELLS R-032ST
CREATES ACTIVE BARRIER JAMMING IN TACTICAL AND OPER-
ATIONAL COMMAND AND CONTROL OF ENEMY UNITS.
3. PRINCIPLE OF ACTION
The shell (propellent) is shot. At a preliminary specified spot on the trajectory of the shell (propellent),
over the target, the ejection system is activated and it is separated from the shell (propellent). Its stabili-
zation system opens and ensures its proper landing.
When the radiojammer plunges into the ground, the automatic control system is turned on.
It activates a sequence of command signals the antenna to be drawn out, the radiojammer to be put
in a broadcasting mode and afterwards its operation to be stopped in 60 minutes.
1. ARTILLERY SHELLS
The R-032ST radio jammers can reach the target as a component part of the rounds, with the help
of the following artillery systems:
1.1. 152 mm artillery system D-20, ML-20 and self-propelled howitzer 2C3;
1.2. 122 mm artillery system D-30, M-30 and self-propelled howitzer 2C1;
1.3. 122 mm BM-21 rocket system;
1.4. 155 mm artillery systems.
2. OPERATIONAL CHARACTERISTICS
2.1. Weight of the transmitter (reference) 3,7 kg
2.2. Dimensions: Length, mm Not more than 505
Diameter, mm Not more than 88
2.3. Frequency range:
2.3.1. Frequency limits, MHz from 1,5 till 120 (up to 530*)
2.3.2. Sub-frequencies, pcs 8 (16*)
REMARK *) These sub-frequencies are provided only upon special request by the client!
2.4. Activation time after hitting the ground, sec. 120 ± 15
2.5. Length of non-stop operation, min. 60 + 5
2.6. Operating temperature range, 0
С From- 400
to + 500
2.7. Operational range of the radiojammer, (reference) m > 700
2.8. Probability for failure free operation
complete with the round in the manufacture’s
packing till the end of the specified non-stop
operation time Not less than 0.85
2.9. Transportation complete with the round By all kinds of transport
2.10. Shell life complete with the round, years ≥10
44. 44 http://sintistechnology.com
Contacts
Address:
246, Tzar Boris III Blvd., Bl. A, office 1,
Sofia 1619, Bulgaria
Office: +359 2 974 4052
Fax: +359 2 974 4052
website: www.sintis.net
website: www.sintistechnology.com
Executive Director & Manager:
Dipl. Eng. M. Sc. Ph. D. Vladimir Turtansky
Mobile: +359 896 734 633
Email: vl.turtansky@sintis.eu
Technical Director & Manager:
Dipl. Eng. M. Sc. Rumen Simeonov
Mobile: +359 896 734 616
Email: r.simeonov@sintis.eu
Projects Coordinator, Point of Contact & Consultant:
Dipl. Eng. M. Sc. Radostin Dimitrov
Mobile: +359 895 549 433
Email: r.dimitrov@sintis.eu
Sales Manager:
Mr. Kiril Koychev
Mobile: +359 886 836 051
Email: k.koychev@sintis.eu
Sales Manager for Saudi Arabia:
Yuri Todorov
Mobile: +359 878 651 336
Mobile: +359 878 128 813
Email: yuri.todorov@gmail.com