1. Document Control
Owner: Raghu Status:completed Draft
Revision History
Version Description of Change Date Author
1.0 Integration between ECC6 and CRM 13/10/2010 raghu
through RFC Connection

2. Table content
1.Overview...........................................................................................................................2
1. Overview

3.  Configure STMS in between two systems by logging in to 000 clients, in both
systems.
 Creating logical systems and assign logical systems to clients in both systems
 Establish rfc connection from ecc6 to crm by using t-code sm59
2.Integrate crm with ecc6 through rfc connection
 Configure STMS in between two systems by logging in to 000 clients, in
both systems.
Enter username and password in 000 client of ecc6

4. Execute stms

5. Click on overview. It opens below screen
Click on save

6. Again logging in 000 client of crm system

7. Execute stms
Click on overview

8. Continue
Save. Then it will open below screen

9. Again logging in 000 client of ecc6 and then execute t-code stms

10. Click on overview
Select crm system

11. Click on approve
Click on Yes. It shows below screen

12. Both are in active state now
Go back

13. Again check crm status by executing t-code stms in crm system
So in above screen it shows crm is virtual system and ecc6 is domain controller

14.  Creating logical systems and assign logical systems to clients in both systems
Execute t-code sale in ecc6

15. Define logical system
Continue
New entries

16. Save
Create own request
Save

17. Continue
Go back

18. Assign logical system to 100 client of ecc6
Same as above define and assign logical system in crm system also

19. Sale
Continue

20. Select 800
Assign logical system to the required client from where we have login remotely

21.  Establish rfc connection from ecc6 to crm by using t-code sm59
Execute Sm59
Click on create

22. Give rfc description

23. Click on save

24. Give host name and system number of source system

25. Go to login & security tab and enter login parameters for remote login from one
system to another system (from crm to ecc6)
Click on save

26. Continue
Again save
Hit on remote logon to test connection then it will enter into source system

27. Click on start sap easy access
Then it Is remotely login into ecc6 system