5. Markings Deciphered: Valve Size
DN32 is simply “diametre nominel” and is the metric equivalent of nominal pipe size
with the next number the size of the pipe in millimeters.
The number next to that is the pipe size in inches.
valve size
valve size
6. Markings Deciphered: Mounting Information
F04/F05 refers to the ISO mounting* patterns that are used to mount actuators.
mounting
information
* Future series
7. Markings Deciphered: Body Material
1.4408-CF8M refers to valve body material. CF8M is a cast 316 stainless steel.
body
material
8. Markings Deciphered: Pressure Class
PN is “pressure nominal” and is the pressure class of the valve in bars (1 bar=14.5038
psi).
1000 is adding the psi equivalent to make it easy to look at in the field.
pressure class
9. Markings Deciphered: Pressure Class
R8F98 is a casting number from the foundry. It is used to track materials and batches.
These are needed to supply Material Test Reports (MTRs). Depending on the body style
there can be more than one of these marks.
casting number
10. Other Markings You Might See
WCB - a grade of cast carbon steel
commonly used for valves
CW617N - the European designation for
brass valves with high zinc content
NACE – indicates that the valve is rated for
sour gas service
ANSI - flange class of valves*
125/150
250/300
600
up to 2500
FNPT or MNPT - male or female threaded
end connections
WOG – stands for water, oil, gas and is an
older way of representing a valve’s
pressure rating.
SWP – Steam working pressure
* Future series
12. Valve Tagging Deciphered
Body refers to the valve casting portion of
the assembly.
Seat is the material the valve ball is going
to seal against. Seats are offered in a wide
range of materials and can even be metal
for severe services.
A valve’s trim includes the internal parts
of the valve such as the ball and stem.
CWP stands for Cold Working Pressure and
indicates the valve pressure rating from
-20 to 100F. Higher temperatures can
severely degrade a valve or pipe’s pressure
rating. Check out the
pressure/temperature chart on slide 11.
12
13. Putting it Together in Part I
Able to Identify
Materials of construction
Valve size
Pressure rating
Valve mfg. & model #
Up Next
End connections
Automation
Butterfly valves
Mounting hardware
Tip:
When possible, try and get information on actual working conditions of the valve.
It helps to get the whole picture and allows for a cost-effective and accurate
quotation.
14. Metric Equivalents
1 bar = 14.058 psi
25.4 mm = 1”
Deg F = (C+17.78) X1.8
1 kilopascal(kPa) = .145 psi
NPS DN
1/4" 8 mm
3/8" 10 mm
1/2" 15 mm
3/4" 20 mm
1" 25 mm
1-1/4" 32 mm
1-1/2" 40 mm
2" 50 mm
2-1/2" 65 mm
3" 80 mm
4" 100 mm
5" 125 mm
6" 150 mm
PN Flange Class
20 150
50 300
68 400
100 600
150 900
250 1500
420 2500
15. 15
Maximum Allowable non-shock Pressure (psig)
Temperature
(o
F)
Pressure Class (lb)
150 300 400 600 900 1500 2500
Hydrostatic Test Pressure (psig)
450 1125 1500 2225 3350 5575 9275
-20 to 100 285 740 990 1480 2220 3705 6170
200 260 675 900 1350 2025 3375 5625
300 230 655 875 1315 1970 3280 5470
400 200 635 845 1270 1900 3170 5280
500 170 600 800 1200 1795 2995 4990
600 140 550 730 1095 1640 2735 4560
650 125 535 715 1075 1610 2685 4475
700 110 535 710 1065 1600 2665 4440
750 95 505 670 1010 1510 2520 4200
800 80 410 550 825 1235 2060 3430
850 65 270 355 535 805 1340 2230
900 50 170 230 345 515 860 1430
950 35 105 140 205 310 515 860
1000 20 50 70 105 155 260 430
Maximum allowable non-shock pressure (psig) and temperature ratings for steel pipe flanges and flanged fittings according the American National Standard ANSI
B16.5 - 1988. The values in this table apply to Material Group 1.1 (i.e. certain carbon steel grades). For other Material Groups the Pressure-Temperature Ratings are
different. Most carbon steels are only acceptable for temperatures below 800 F
Pressure & Temperature